Thingiverse
2.18mm Star Spacer for Shimano SLX M7000 Cassette by pixelchemist
by Thingiverse
Last crawled date: 3 years ago
Replacement star spacer for Shimano SLX M7000 11-Speed Cassette.
Not an exact replica, slightly larger and added an outer ring to prevent the scenario that led to the original part getting snagged and broken. z
The inner teeth are intentionally undersized to allow for printer "error". They are just enough to keep it in place when installing, the pressure from the cogs/lockring holds it firmly once fully installed.
Not an exact replica, slightly larger and added an outer ring to prevent the scenario that led to the original part getting snagged and broken. z
The inner teeth are intentionally undersized to allow for printer "error". They are just enough to keep it in place when installing, the pressure from the cogs/lockring holds it firmly once fully installed.
Similar models
thingiverse
free
Shimano SL-M7000 shifter to BL-M7100 lever adapter by froehlich4
... shifters.
works fine if printed in pla. i needed it for replacing my broken slx lever with the one from the current generation.
thingiverse
free
8 Speed Shimano/SRAM Cassette Spacer (3.0 mm) by aiber
...cer (3.0 mm) by aiber
thingiverse
see http://www.thingiverse.com/thing:2064758
this one works with shimano & sram cassettes.
thingiverse
free
10 Speed Shimano Cassette Spacer (2.35 mm) by aiber
...mp;keywords=cassette+spacer they cost too much.
pretty sure it'll be strong enough. i'll let you know if i have problems.
thingiverse
free
9 Speed Shimano Cassette Spacer (2.56 mm) by aiber
...9 speed shimano cassette spacer (2.56 mm) by aiber
thingiverse
see http://www.thingiverse.com/thing:2064758
thingiverse
free
Shimano Cassette Plug
... can be oriented in any direction but works best to line up one of the teeth on the plug with the narrow slot on the cassette.
thingiverse
free
Shimano Matchmaker Adapter
...rse
adapter plate for many shimano shifters to attach to sram matchmaker mmx brake clamp. modeled on shifter sl-m7000 from 2016.
thingiverse
free
shimano 7->8 cassette spacer by gregor_p
...1844
[2] video https://www.youtube.com/watch?v=jrd5xaqfgaa
[3] https://www.kurbelix.de/shimano-zwischenring-fuer-hg-kassette-3-mm
thingiverse
free
Adapter for Shimano 11 speed road shifter and MTB rear derailleur
...heck out this short video dedicated to it:https://www.youtube.com/watch?v=evsop8waglk
if you have any questions feel free to ask.
thingiverse
free
Shimano Cassette Spacer - 3.5mm by ehud42
...the wheel. so, i printed one!
this one is almost embarrassingly simple. just a ring. but it fits well enough to get the job done!
thingiverse
free
Shimano Hydraulic brake spacer by tatico
...shimano hydraulic brake spacer by tatico
thingiverse
shimano hydraulic brake spacer
M7000
thingiverse
free
Shimano SL-M7000 shifter to BL-M7100 lever adapter by froehlich4
... shifters.
works fine if printed in pla. i needed it for replacing my broken slx lever with the one from the current generation.
thingiverse
free
Shimano Matchmaker Adapter
...to sram matchmaker mmx brake clamp. modeled on shifter sl-m7000 from...
thingiverse
free
Adapter for Shimano 11 speed road shifter and MTB rear derailleur
...tested with this setup: rear derailleur is shimano slx rd-m7000 gs cassette is xt 11-speed cs-m8000 11-40t road shifters...
Pixelchemist
thingiverse
free
Lipstick Organizer by pixelchemist
...lipstick organizer by pixelchemist
thingiverse
lipstick organizer made for my wife.
fits up to 22x22mm lipstick containers
thingiverse
free
Telecaster Bridge Pickup Mounting Ring by pixelchemist
...telecaster bridge pickup mounting ring by pixelchemist
thingiverse
a telecaster bridge pickup mounting ring.
thingiverse
free
JGAurora A5 Adjustable Camera Mount by pixelchemist
...jgaurora a5 adjustable camera mount by pixelchemist
thingiverse
an adjustable camera mount for the jg aurora a5 printer
thingiverse
free
M3 Thumbscrew Knob Extender by pixelchemist
...ixelchemist
thingiverse
fits the m3 thumbscrew with 10.8mm flange commonly found in bed leveling hardware kits on chinese sites.
thingiverse
free
TS100 Soldering Iron Tip Cover / Cap by pixelchemist
...ts100 soldering iron tip cover / cap by pixelchemist
thingiverse
cover for ts100 tips, print vertically no support
thingiverse
free
Triple Heart Charm by pixelchemist
...gest around 42mm as a good size for fdm printers at 0.2 layer heights
depending on your slicer you may need to flip the normals.
thingiverse
free
Daiso Bin Joining Clip by pixelchemist
...of with desiccant and then put in the partially used filament rolls and lock it shut with the clips.
not perfect but functional.
thingiverse
free
LifeCam Studio / LifeCam Cinema Mount by pixelchemist
...fit between the ring and body to protect the camera body and allow a firm grip
now includes a stronger (more rigid) lower section
thingiverse
free
Raspberry Pi Wide Angle Camera Enclosure/Mount by pixelchemist
...nal accuracy is not spot on or your prints tend to elephant foot or if you just want something that opens and closes more easily.
Slx
thingiverse
free
Shimano XT(SLX) BL-M8100 Brake Lever Sealing by crossblade
... lever sealing by crossblade
thingiverse
this seal protects shimano brake lever main cylinder from dirt and dust (i hope so :) )
thingiverse
free
Shimano XT M8100 / SLX M7100 Brake Lever
...end this as a permanent solution for something as crucial as brakes. if you do choose to do so, do so at your own responsibility.
thingiverse
free
Set of Logos for NISSAN Bluebird T12 2.0 SLX by kt1040
... so i took the old ones and created some new.
if anybody have the same need, give them a try but do not miss the filament change.
thingiverse
free
Shimano SLX Shift Indicator Blockoff/Cover by sandreezy
...tent at 3d printing, i have these on sale on ebayhttps://www.ebay.com/itm/224256097800
aren't you glad you have a 3d printer?
thingiverse
free
Bafang Hydraulic Brake Sensor Magnet mount for Shimano SLX M665 Brake Levers by osunick
...he mount means these secure to your levers without glue. place the sensor as seen in the photo and they should register properly.
thingiverse
free
Gardiner Window Cleaning Pole Tension Clip
...clip thingiverse this is a tension clip for gardiner slx and clx water fed window cleaning...
thingiverse
free
MTB Chainring rain guard
...guard thingiverse default: iscg 05, height: 25,5mm (tested with slx 2x11) please use fusion 360 project for...
thingiverse
free
Shimano SL-M7000 shifter to BL-M7100 lever adapter by froehlich4
...froehlich4 thingiverse this is an adapter to mount shimano slx sl-m7000 shifter on a bl-m7100 lever which is normally...
thingiverse
free
Shimano MTB breaks nut by tomzi1234
...she got a new pink one instead. sutable for slx and xt shimano disk break...
Cassette
thingiverse
free
Cassette Holder
...erse
really a young person with a cassette! yes, too many cassettes to keep unorganized.
it can hold 4 standard sized cassettes.
thingiverse
free
Cassette by
...cassette by
thingiverse
throwback thursday
thingiverse
free
Cassette by Skooter
...cassette by skooter
thingiverse
just a cassette that i made while being bored.
thingiverse
free
Radio cassette by leonk
...radio cassette by leonk
thingiverse
radio cassette
thingiverse
free
Cassette Keychain by arifsethi
...cassette keychain by arifsethi
thingiverse
cassette keychain
thingiverse
free
Cassette Tape
...iverse
3d representation of this relic from the 90s. please note that this is only a model and will not play in cassette player.
thingiverse
free
Cassette by Jon_Hoyle
...y jon_hoyle
thingiverse
one side of a cassette tape.
instructions.
print
print again
turn one print over
glue together
thingiverse
free
Cassette Keychain by doitprojects
...cassette keychain by doitprojects
thingiverse
this is a cassette keychain svg for laser cutting.
https://youtu.be/kebj8hoy3vu
thingiverse
free
Mountainbike cassette tool by Geertvg
...mountainbike cassette tool by geertvg
thingiverse
cassette remover tool
thingiverse
free
Cassette rack by siderits
...ainer they can fall over and scatter. this rack helps keep the cassettes in order and won't allow them to spill and scatter.
Shimano
thingiverse
free
Shimano Dura Ace and Shimano 600 stem cap replacement
...shimano dura ace and shimano 600 stem cap replacement
thingiverse
stem cap for vintage shimano 600 and dura ace stems.
thingiverse
free
Kettenschutz Shimano by marcus16423
...kettenschutz shimano by marcus16423
thingiverse
-kettenschutz für shimano acera
-kettenblett 42t
-lochmaß 102,5 mm
thingiverse
free
Brake pad shimano by over885
...brake pad shimano by over885
thingiverse
brake pad shimano
thingiverse
free
crank shimano reforced by vmtdm
...crank shimano reforced by vmtdm
thingiverse
protecção crank shimano
thingiverse
free
Kettenschutz Shimano 42 Zähne / Chain Guard Shimano 42T by Cikey1987
...2 zähne / chain guard shimano 42t by cikey1987
thingiverse
kettenschutz für shimano-kettenblatt mit 42 zähnen und 5 haltepunkten
thingiverse
free
Shimano shift lever support
...shimano shift lever support
thingiverse
shimano shift lever support copy
thingiverse
free
Shimano Matchmaker Adapter
...rse
adapter plate for many shimano shifters to attach to sram matchmaker mmx brake clamp. modeled on shifter sl-m7000 from 2016.
thingiverse
free
special tool Shimano crancks by jel1601
...special tool shimano crancks by jel1601
thingiverse
special tool shimano crancks
thingiverse
free
Shimano Hydraulic brake spacer by tatico
...shimano hydraulic brake spacer by tatico
thingiverse
shimano hydraulic brake spacer
thingiverse
free
Shimano Ultegra/dura ace pulley by micler0
...egra/dura ace pulley by micler0
thingiverse
this is replacement for original shimano pulleys. works with all shimano derailleurs
18Mm
thingiverse
free
Cable Organizer 18mm by mikeprusa
...cable organizer 18mm by mikeprusa
thingiverse
cable organizer 18mm
thingiverse
free
18mm gnolls by PhysUdo
...18mm gnolls by physudo
thingiverse
mixed together some gnolls in 18mm for d&d. for 28mm, scale up by 155,55%.
thingiverse
free
mockup sensor 18mm by nowkillkennys
...mockup sensor 18mm by nowkillkennys
thingiverse
mockup of the sensor mount 18mm
thingiverse
free
Wood jig 18mm
...wood jig 18mm
thingiverse
this a jig for connecting 18mm wood panels.
i havent print this yet, print at your own risk.
thingiverse
free
18mm to 14mm bowl adapter
...18mm to 14mm bowl adapter
thingiverse
simple 18mm to 14mm adapter for bowls.
thingiverse
free
Extender 18mm for KS-18L
...extender 18mm for ks-18l
thingiverse
extender 18mm for lifting ks-18l
thingiverse
free
18mm Pipe Connectors by punktgestalten
...18mm pipe connectors by punktgestalten
thingiverse
pipe connectors for 18mm chopper pipes
thingiverse
free
18mm Biocube Elbow by ncc1702
...18mm biocube elbow by ncc1702
thingiverse
18mm od elbow designed for 30g biocube.
thingiverse
free
scribing tool 18mm centre
...il and gives a line 18mm centre to be used with fillet scribe holder for 18mm carcasses https://www.thingiverse.com/thing:4025687
thingiverse
free
18mm Male Plug by ajrisi
...18mm male plug by ajrisi
thingiverse
18mm male lab glass plug. print with 30% infill.
Spacer
thingiverse
free
Spacers
...cers
diametre_inter=1.9; // diameter of hole of spacers for screw always add 0.4mm
//example for 3mm diameter 1.5 + 0.4mm = 1.9mm
thingiverse
free
Spacer by grafis
...spacer by grafis
thingiverse
spacer
thingiverse
free
spacer by airsoftedward
...spacer by airsoftedward
thingiverse
spacer
thingiverse
free
Spacer by jrwolfe
...spacer by jrwolfe
thingiverse
spacer
thingiverse
free
Sign spacer
...sign spacer
thingiverse
sign spacer
thingiverse
free
Spacer by error404robotics_2336
...spacer by error404robotics_2336
thingiverse
a small spacer
thingiverse
free
monitor spacer
...monitor spacer
thingiverse
spacer for monitor rod
thingiverse
free
Spring spacer
...spring spacer
thingiverse
spacer to add spring tension
thingiverse
free
Spacer by franz2108
...spacer by franz2108
thingiverse
spacer by franz [created on 3dtin]
thingiverse
free
Plastic Spacer
...plastic spacer
thingiverse
plastic bushing/spacer for paper shredder.
Star
thingiverse
free
Star
...star
thingiverse
star
thingiverse
free
STARS
...stars
thingiverse
3 stars
thingiverse
free
Star
...star
thingiverse
just a little star
thingiverse
free
Star Wars Death Star
...star wars death star
thingiverse
star wars death star hollow to put light in. size accordingly
thingiverse
free
Star
...star
thingiverse
friend wanted a star for other friends christmas tree.
thingiverse
free
Star (Star of David) by phoughton
...ristmas tree decoration, or if printed in glow in the dark filament - as stars for a child's ceiling.
created using openscad.
thingiverse
free
Throwing Star (Ninja star)
...throwing star (ninja star)
thingiverse
if this design can hit 20 likes then i will make a wider variety of throwing stars.
thingiverse
free
WS2811 STAR
...ws2811 star
thingiverse
a star with ws2811 leds, the star must be glue
thingiverse
free
star by stevehaines
...star by stevehaines
thingiverse
star
thingiverse
free
star by Syzguru11
...star by syzguru11
thingiverse
star
2
thingiverse
free
KV-2-2-2 by redstone125
...kv-2-2-2 by redstone125
thingiverse
nuclear death refrigerator x3.
thingiverse
free
Braccialetto 2 - Bracelets 2 by doctormao
...braccialetto 2 - bracelets 2 by doctormao
thingiverse
braccialetto 2 - bracelets 2
thingiverse
free
Schleuder 2 / Slingshot 2 by Ju5tMak3
...schleuder 2 / slingshot 2 by ju5tmak3
thingiverse
schleuder 2 / slingshot 2
have fun
thingiverse
free
2-Hexagon-2 by letongtr
...2-hexagon-2 by letongtr
thingiverse
ultrascope project
thingiverse
free
X'2 2 by kwcartroom
...x'2 2 by kwcartroom
thingiverse
try number 2
thingiverse
free
2 Color Box (#2) by David_Mussaffi
...2 color box (#2) by david_mussaffi
thingiverse
2 color box (#2)https://www.youtube.com/watch?v=g5jgss-fn_8
thingiverse
free
Toy Gun 2-2
...toy gun 2-2
thingiverse
this morning's design.
thingiverse
free
(a+b)^2 = a^2 +2ab+b^2, algebraic formula by lgbu
... ways to explain (a+b)^2 = a^2 +2ab+b^2.
the board alone is enough; the component pieces just add another layer of manipulation.
thingiverse
free
2 by orhandrkn
...2 by orhandrkn
thingiverse
2
thingiverse
free
2 by Nicolewake
...2 by nicolewake
thingiverse
2