2000 Watt Pneumatic Light Tower - Extends to 18 Feet - 500W Halogens - Individually Controlled

Last crawled date: 1 year, 11 months ago

http://www.larsonelectronics.com/p-69951-2000-watt-pneumatic-light-tower-extends-to-18-feet-500w-halogens-individually-controlled.aspx

Made in USA

The PLM-18-4X500WH-RC Pneumatic Light Tower from Larson Electronics is an 18 foot extendable light tower equipped with four halogen quartz light fixtures producing approximately 9,500 lumens each. The four 500 watt halogen lamps produce a wide spread of intense light, allowing this unit to effectively cover large work areas with high quality illumination.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*

The PLM-18-4X500WH-RC telescoping pneumatic light tower allows operators to quickly and safely deploy 2,000 watts of halogen lighting in locations where elevated illumination is needed for maximum area coverage. This four section light boom can be extended to 18 feet for maximum area coverage and collapsed to 8 feet for stowage. A locking top mounting plate allows operaters to easy removal of lights for storage or transport. The mast is elevated using an included 250 watt 220 Volt AC 50/60hz, 1/3 horsepower air compressor within the control box. An air release valve located at the base of this pneumatic mast allows operators to lower the tower.

This light mast features a remote control pan tilt head, allowing operators to individually adjust the light heads. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. All wiring runs through the mast, meaning no loose wires when the tower is collapses.

These light masts are typically mounted to trailers or other stable surfaces via a 12 inch square, 1/2 inch thick mounting base-plate which has been drilled to accept four mounting bolts (3/4 inch). A 24 inch wide and 1/4 inch thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the four metal halide fixtures. We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power. We also offer an alternative choice of conventional electric or manually operated towers equipped with winches for raising and lowering.

Suggested Applications: Construction sites, event lighting, emergency services, highway projects, industrial plants, mining, excavation, natural disaster relief, environmental cleanup, and anywhere a mobile light source with large area coverage capability is needed.