Thingiverse
2" Micro Quad - PETG edition by heliboy
by Thingiverse
Last crawled date: 3 years, 1 month ago
Dragonfly is a 3D printed 2" micro quad designed to be made out of PETG, Nylon12 or Polycarbonate, which are reasonable strong materials. And it is designed to fly like a 5" quad... Providing a great platform for indoor flying, or simply to learn to fly quads LOS or FPV. Its especial good for back garden flying, crucially it is below the 250 gm weight limit for CAA or FAA registration.
The quad weighs about 104 gm and the motor can produce up to 250 gm of thrust depending on the battery pack used, providing an exciting but predictable flight experience.
Here is a link to a video of actual flight footage . To follow..
Parts List
Micro Quad - Parts List for 2.5” Kwad
updates adding; props, batteries, antenna tubes & screws…
So, you have three cost options☺
Parts full PFV Quad £480 everything you need – including RC Transmitter & Goggles
Ready To Fly £200 - incl batteries, charger, & TX.
Bind aNd Fly £90 Just add radio, batteries, goggles, & charger
I would recommend you went with option 1, the RC Transmitter & Goggles will work with our larger drone too☺
If you could use the affiliate links when ordering from Banggood - I gain affiliate points for that and small kickback each order - you pay the same price… When ordering filament, please use this referral link to register with rigid.ink before ordering http://r.sloyalty.com/r/vrSCxj2CAs9i . This helps refund all my research projects with 3D printing and drone designs…
FatShark Attitude V4 goggles - £255 - DVR included
This is a great pair of goggleshttps://www.banggood.com/Fatshark-Attitude-V4-FPV-Goggles-43-Video-Headset-With-DVR-5_8G-32CH-OLED-RX-7_4V-1000mAh-Battery-p-1145262.html?p=9B190738232242016024
Fatshark Dominator HD3 - Top of the range goggle - https://s3.amazonaws.com/helpscout.net/docs/assets/52a0a907e4b010488044ba40/attachments/5a68d1412c7d3a39e62652ce/FSV1076-Dominator-HD3-Manual-RevB.pdf
Transmitter - QX7 - Remember Mode 2 left hand throttle.. £79.19https://www.banggood.com/FrSky-ACCST-Taranis-Q-X7-2_4GHz-16CH-Transmitter-White-Black-p-1112717.html?p=9B190738232242016024
Green, Orange, Blue, White & Black
VTX - £9.34https://www.banggood.com/Eachine-VTX03-Super-Mini-5_8G-72CH-025mW50mw200mW-Switchable-FPV-Transmitter-p-1114206.html?p=9B190738232242016024
RX - FRSKY - XSR - £13.23https://www.banggood.com/FrSky-XSR-2_4GHz-16CH-ACCST-Receiver-S-Bus-CPPM-Output-Support-X9D-X9E-X9DP-X12S-X-Series-p-1031481.html?p=9B190738232242016024
2” Tri-blade Props - £2.34https://www.banggood.com/4-Pairs-Gemfan-Hulkie-2040-2_0X4_0-PC-3-blade-Propeller-CW-CCW-for-0806-1105-Motor-p-1186606.html?p=9B190738232242016024
2.5” Tri-blade Props
Gemfan Flash 2540-3 Propellers 2.5x4.0 Inch Triblade Props 3-Blade Compatible with 1104 -1105 FPV Mini Racing Motors (Pack of 12 Pairs,Mix Colors) https://www.amazon.co.uk/dp/B0772TBM79/ref=cm_sw_r_cp_api_DObGAbFYMJ7M9https://www.banggood.com/4-Pairs-Gemfan-Flash-2540-2_5x4-2_5-Inch-3-Blade-Propeller-with-1_5mm-Mounting-Hole-p-1221999.html?p=9B190738232242016024
Gemfan Flash 2540 2.5x4 2.5 Inch 3-Blade Propeller with 1.5mm Mounting Hole – 4 pairs - £2.70https://www.banggood.com/4-Pairs-Gemfan-Flash-2540-2_5x4-2_5-Inch-3-Blade-Propeller-with-1_5mm-Mounting-Hole-p-1221999.html?p=9B190738232242016024
4 in 1 - 12A or 25A ESC - £23.45 or £27.36https://www.banggood.com/20x20mm-Racerstar-Mini-RS12Ax4-12A-Blheli_S-BB2-2-4S-4-in-1-Brushless-ESC-D-Shot-Ready-p-1132683.html?p=9B190738232242016024https://www.banggood.com/20x20mm-Racerstar-Star25-25A-BLHELI_S-2-4S-4in1-Brushless-ESC-Dshot600-Ready-p-1184864.html?p=9B190738232242016024
STM32F4 - Beta Flight Flight Controller OMNI F4 - with BEC & OSD - £13.29https://www.banggood.com/Micro-20x20mm-Betaflight-STM32F4-F4-Brushless-Flight-Controller-Integrated-with-BEC-OSD-p-1132495.html?p=9B190738232242016024
BR1106 3800KV Brushless Motors - £25.41https://www.banggood.com/4X-Racerstar-Racing-Edition-1106-BR1106-3800KV-1-3S-Brushless-Motor-For-100-120-150-RC-Multirotor-p-1111839.html?p=9B190738232242016024
FPV Camera - RunCam Micro Swift 600TVL 2.1mm/2.3mm £23.45https://www.banggood.com/RunCam-Micro-Swift-600TVL-2_1mm-2_3mm-IR-Blocked-CCD-FPV-Camera-PAL-NTSC-5_6g-p-1144546.html?p=9B190738232242016024
Miniature GoPro - £9.38https://www.banggood.com/Original-Mini-Camera-SQ11-HD-Camcorder-HD-Night-Vision-1080P-Sports-Mini-DV-Video-Recorder-p-1139282.html?p=9B190738232242016024
Batteries - 2S; 25g & $8.99, 3S 37g $10.99 & 4S 48g $12.99
2S low price, low power great for flying with a bear frame, nothing else a good beginners option…
3S Great for flying a VTX & FPV camera and additional TPU radio tray and camera mount
4S Great for flying with, additional TPU parts, FPV camera & VTX & a miniature GoPro
Amazon
2S, 350 mAh, 26 gms, Makerfire - £9.99 https://www.amazon.co.uk/gp/product/B0734S2LMW/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1
2S, 600 mAh, 32 gms, GNB - £9.99 https://www.amazon.co.uk/gp/product/B07435HP3X/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Newbeedrone {US custom charge but great batteries}
2S - https://newbeedrone.com/collections/batteries/products/nitro-nectar-350-mah-2s-lipo-battery
3S - https://newbeedrone.com/collections/batteries/products/nitro-nectar-350-mah-3s-lipo-battery
4S - https://newbeedrone.com/collections/batteries/products/nitro-nectar-350-mah-4s-lipo-battery
Quadcopter uk - a little heavy - £10.
3S - https://www.quadcopters.co.uk/tattu-650mah-3s-75c-lipo-battery-3238
4S - https://www.quadcopters.co.uk/tattu-650mah-148v-4s-75c-lipo-battery
Black M3 Nylon hex standoff, screw & nut kit - £5.92https://www.banggood.com/160pcs-M3-Nylon-Black-M-F-Hex-Spacers-Screw-Nut-Assortment-Kit-p-942282.html?p=9B190738232242016024
or on Amazonhttps://www.amazon.co.uk/gp/product/B01M9AY5Z6/ref=ox_sc_act_title_2?smid=AKLCSP4G2I89L&psc=1
Antenna Tubes - £1.90https://www.amazon.co.uk/gp/product/B009H0U3CY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
XT-30 leads - £6.99https://www.amazon.co.uk/gp/product/B074KV21CW/ref=ox_sc_act_title_1?smid=A23CONQMRIHLKZ&psc=1
Battery Straps - £5.99https://www.amazon.co.uk/gp/product/B071RTGYNM/ref=ox_sc_act_title_2?smid=A23CONQMRIHLKZ&psc=1
Battery Charger £16.95 or £46.91
The cheaper is good enough to start with but £46 pound is very nice…https://www.banggood.com/Wholesale-IMAX-B6-Digital-RC-Lipo-NiMH-battery-Balance-Charger-p-46220.html?p=9B190738232242016024
https://www.banggood.com/ISDT-Q6-Plus-300W-14A-MINI-Pocket-Battery-Balance-Charger-Orange-p-1185671.html?p=9B190738232242016024
Battery bags 3 for £3.06https://www.banggood.com/Li-Po-Battery-Explosion-Proof-Safety-Bag-Charging-Sack-18x23x6cm-p-1017484.html?p=9B190738232242016024
Filament for the Frame - you pas your money and takes your choice, I would go with PETG, White Nylon or Black Carbonite, for the flexible material TPU or flexible PLA work equally well… If you go for a fun pack I could print an number of alternate parts. Http://Rigid.ink produce high quality filaments, its not work buying from another source unless it Verbatim on Amazon.
Please use this referral link to register with rigid.ink http://r.sloyalty.com/r/vrSCxj2CAs9i
PETG – Highly recommended - £28.96 produces a very strong durable Kwadhttps://rigid.ink/products/3d-filament-petg-testing-pack
Nylon 12 - Qty 10m, 1.75mm, £7.45 - easy to print - produce an exceptionally strong durable light Kwad
White only - https://rigid.ink/products/nylon-12-1-75mm-0-03-mm-tolerance-filament?variant=18130694471
Carbonite - Qty 10m, 1.75mm, £10.96, difficult to print. (This is our best option for a light, durable racing quad)
Black - https://rigid.ink/products/carbonyte-3d-printer-filament
ABS - Qty 10m, 1.75mm, Strong & durable, but difficult to print. 5 x 10m, 1.75mm, £13.96
Fun Pack - https://rigid.ink/products/abs-1-75mm-transparent-fun-pack-5-x-10m-samples?variant=52928311379
PLA - Many Colours beautiful Print Quality not as durable as Nylon, Carbonite or ABS… 5 x 10m, 1.75mm, £13.96
Fun Pack - https://rigid.ink/products/pla-fun-packs
PLA + A vibration absorbing and less brittle version of PLA, very durable. 7 x 5m, 1.75mm, £27.95https://rigid.ink/products/3d-filament-pla-plus-testing-pack?variant=52928450003
Battery and Camera mount TPU or Flexible PLA
Thermoplastic PolyUrethane - 1.75mm, 7 x 5m, £42.95. or 10m x 1.75mm £6.46
Fun Pack - https://rigid.ink/products/3d-filament-tpu-testing-pack?variant=52928122259
individual - https://rigid.ink/products/tpu-1-75mm-0-03mm-tolerance?variant=35362462471
Flexible - PLA 1.75 with 6 x 10mm for £26.95 or £4.96 each
Fun Pack - https://rigid.ink/products/3d-filament-flexible-pla-testing-pack
individual - https://rigid.ink/products/flexible-pla-1-75-mm-0-03-mm-tolerance-filament?variant=6520579329
Alternative Frame - Carbon - £30.49https://www.banggood.com/Exuav-145mm-Wheelbase-4mm-Arm-FPV-Racing-Drone-Frame-Kit-support-Runcam-Micro-Swift-Camera-43g-p-1212343.html?p=9B190738232242016024
Prop screws M2 x 7mm button head. Screwshttps://www.amazon.co.uk/dp/B01N572N7C/ref=cm_sw_r_cp_api_9KbGAb4KK10X3
Motor bolts - M2.5 x 8mm capped head x 16https://www.accu.co.uk/en/cap-head-screws/250408-SSCF-M2-5-8-A2-R360?uk_google_shopping=1&c=3&mkwid=s_dc&pcrid=247850430377&kword=&match=&plid=&gclid=Cj0KCQiAq6_UBRCEARIsAHyrgUzICY5FuvnkZHXYDiLGu6ExZ8IC3t941pCaabasyIv98IP864L44SIaAq92EALw_wcB
Arm screws - M1.2 x 4mm countersunk cross head self tapping screw…https://www.amazon.co.uk/sourcingmap®-M1-2x4mm-Phillips-Tapping-Fastener/dp/B01N0XITS3/ref=sr_1_fkmr1_1?s=diy&ie=UTF8&qid=1519146479&sr=1-1-fkmr1&keywords=M1.2+x+4+mm+cross+head+countersunk+self+tappers
RGB LEDs - WS2812 24 bit true colour LED - https://thepihut.com/products/adafruit-flora-rgb-smart-neopixel-version-2-sheet-of-20?variant=27739468241&gclid=EAIaIQobChMIi7_OpJG92gIVLrXtCh2GUQiREAQYASABEgLgtPD_BwE#fo_c=1889&fo_k=6260e390432f77b08b249b46914b621d&fo_s=gplauk
Firmware setting a lot more to come here…
Chrome App’s
Betaflight -
BL_Heli_S -
OpenTX - for TX & RX -
Custom mix settings
resource MOTOR 1 B00
resource MOTOR 2 B01
resource MOTOR 3 A03
resource MOTOR 4 A02
Motors
1 = 1
2 = 4
3 = 3
4 = 2
so CLI commands
resource MOTOR 2 A02
resource MOTOR 4 B01
save
resource MOTOR 1 B00
resource MOTOR 2 A02
resource MOTOR 3 A03
resource MOTOR 4 B01
Learning to fly a quad.https://uavcoach.com/how-to-fly-a-quadcopter-guide/
The quad weighs about 104 gm and the motor can produce up to 250 gm of thrust depending on the battery pack used, providing an exciting but predictable flight experience.
Here is a link to a video of actual flight footage . To follow..
Parts List
Micro Quad - Parts List for 2.5” Kwad
updates adding; props, batteries, antenna tubes & screws…
So, you have three cost options☺
Parts full PFV Quad £480 everything you need – including RC Transmitter & Goggles
Ready To Fly £200 - incl batteries, charger, & TX.
Bind aNd Fly £90 Just add radio, batteries, goggles, & charger
I would recommend you went with option 1, the RC Transmitter & Goggles will work with our larger drone too☺
If you could use the affiliate links when ordering from Banggood - I gain affiliate points for that and small kickback each order - you pay the same price… When ordering filament, please use this referral link to register with rigid.ink before ordering http://r.sloyalty.com/r/vrSCxj2CAs9i . This helps refund all my research projects with 3D printing and drone designs…
FatShark Attitude V4 goggles - £255 - DVR included
This is a great pair of goggleshttps://www.banggood.com/Fatshark-Attitude-V4-FPV-Goggles-43-Video-Headset-With-DVR-5_8G-32CH-OLED-RX-7_4V-1000mAh-Battery-p-1145262.html?p=9B190738232242016024
Fatshark Dominator HD3 - Top of the range goggle - https://s3.amazonaws.com/helpscout.net/docs/assets/52a0a907e4b010488044ba40/attachments/5a68d1412c7d3a39e62652ce/FSV1076-Dominator-HD3-Manual-RevB.pdf
Transmitter - QX7 - Remember Mode 2 left hand throttle.. £79.19https://www.banggood.com/FrSky-ACCST-Taranis-Q-X7-2_4GHz-16CH-Transmitter-White-Black-p-1112717.html?p=9B190738232242016024
Green, Orange, Blue, White & Black
VTX - £9.34https://www.banggood.com/Eachine-VTX03-Super-Mini-5_8G-72CH-025mW50mw200mW-Switchable-FPV-Transmitter-p-1114206.html?p=9B190738232242016024
RX - FRSKY - XSR - £13.23https://www.banggood.com/FrSky-XSR-2_4GHz-16CH-ACCST-Receiver-S-Bus-CPPM-Output-Support-X9D-X9E-X9DP-X12S-X-Series-p-1031481.html?p=9B190738232242016024
2” Tri-blade Props - £2.34https://www.banggood.com/4-Pairs-Gemfan-Hulkie-2040-2_0X4_0-PC-3-blade-Propeller-CW-CCW-for-0806-1105-Motor-p-1186606.html?p=9B190738232242016024
2.5” Tri-blade Props
Gemfan Flash 2540-3 Propellers 2.5x4.0 Inch Triblade Props 3-Blade Compatible with 1104 -1105 FPV Mini Racing Motors (Pack of 12 Pairs,Mix Colors) https://www.amazon.co.uk/dp/B0772TBM79/ref=cm_sw_r_cp_api_DObGAbFYMJ7M9https://www.banggood.com/4-Pairs-Gemfan-Flash-2540-2_5x4-2_5-Inch-3-Blade-Propeller-with-1_5mm-Mounting-Hole-p-1221999.html?p=9B190738232242016024
Gemfan Flash 2540 2.5x4 2.5 Inch 3-Blade Propeller with 1.5mm Mounting Hole – 4 pairs - £2.70https://www.banggood.com/4-Pairs-Gemfan-Flash-2540-2_5x4-2_5-Inch-3-Blade-Propeller-with-1_5mm-Mounting-Hole-p-1221999.html?p=9B190738232242016024
4 in 1 - 12A or 25A ESC - £23.45 or £27.36https://www.banggood.com/20x20mm-Racerstar-Mini-RS12Ax4-12A-Blheli_S-BB2-2-4S-4-in-1-Brushless-ESC-D-Shot-Ready-p-1132683.html?p=9B190738232242016024https://www.banggood.com/20x20mm-Racerstar-Star25-25A-BLHELI_S-2-4S-4in1-Brushless-ESC-Dshot600-Ready-p-1184864.html?p=9B190738232242016024
STM32F4 - Beta Flight Flight Controller OMNI F4 - with BEC & OSD - £13.29https://www.banggood.com/Micro-20x20mm-Betaflight-STM32F4-F4-Brushless-Flight-Controller-Integrated-with-BEC-OSD-p-1132495.html?p=9B190738232242016024
BR1106 3800KV Brushless Motors - £25.41https://www.banggood.com/4X-Racerstar-Racing-Edition-1106-BR1106-3800KV-1-3S-Brushless-Motor-For-100-120-150-RC-Multirotor-p-1111839.html?p=9B190738232242016024
FPV Camera - RunCam Micro Swift 600TVL 2.1mm/2.3mm £23.45https://www.banggood.com/RunCam-Micro-Swift-600TVL-2_1mm-2_3mm-IR-Blocked-CCD-FPV-Camera-PAL-NTSC-5_6g-p-1144546.html?p=9B190738232242016024
Miniature GoPro - £9.38https://www.banggood.com/Original-Mini-Camera-SQ11-HD-Camcorder-HD-Night-Vision-1080P-Sports-Mini-DV-Video-Recorder-p-1139282.html?p=9B190738232242016024
Batteries - 2S; 25g & $8.99, 3S 37g $10.99 & 4S 48g $12.99
2S low price, low power great for flying with a bear frame, nothing else a good beginners option…
3S Great for flying a VTX & FPV camera and additional TPU radio tray and camera mount
4S Great for flying with, additional TPU parts, FPV camera & VTX & a miniature GoPro
Amazon
2S, 350 mAh, 26 gms, Makerfire - £9.99 https://www.amazon.co.uk/gp/product/B0734S2LMW/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1
2S, 600 mAh, 32 gms, GNB - £9.99 https://www.amazon.co.uk/gp/product/B07435HP3X/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Newbeedrone {US custom charge but great batteries}
2S - https://newbeedrone.com/collections/batteries/products/nitro-nectar-350-mah-2s-lipo-battery
3S - https://newbeedrone.com/collections/batteries/products/nitro-nectar-350-mah-3s-lipo-battery
4S - https://newbeedrone.com/collections/batteries/products/nitro-nectar-350-mah-4s-lipo-battery
Quadcopter uk - a little heavy - £10.
3S - https://www.quadcopters.co.uk/tattu-650mah-3s-75c-lipo-battery-3238
4S - https://www.quadcopters.co.uk/tattu-650mah-148v-4s-75c-lipo-battery
Black M3 Nylon hex standoff, screw & nut kit - £5.92https://www.banggood.com/160pcs-M3-Nylon-Black-M-F-Hex-Spacers-Screw-Nut-Assortment-Kit-p-942282.html?p=9B190738232242016024
or on Amazonhttps://www.amazon.co.uk/gp/product/B01M9AY5Z6/ref=ox_sc_act_title_2?smid=AKLCSP4G2I89L&psc=1
Antenna Tubes - £1.90https://www.amazon.co.uk/gp/product/B009H0U3CY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
XT-30 leads - £6.99https://www.amazon.co.uk/gp/product/B074KV21CW/ref=ox_sc_act_title_1?smid=A23CONQMRIHLKZ&psc=1
Battery Straps - £5.99https://www.amazon.co.uk/gp/product/B071RTGYNM/ref=ox_sc_act_title_2?smid=A23CONQMRIHLKZ&psc=1
Battery Charger £16.95 or £46.91
The cheaper is good enough to start with but £46 pound is very nice…https://www.banggood.com/Wholesale-IMAX-B6-Digital-RC-Lipo-NiMH-battery-Balance-Charger-p-46220.html?p=9B190738232242016024
https://www.banggood.com/ISDT-Q6-Plus-300W-14A-MINI-Pocket-Battery-Balance-Charger-Orange-p-1185671.html?p=9B190738232242016024
Battery bags 3 for £3.06https://www.banggood.com/Li-Po-Battery-Explosion-Proof-Safety-Bag-Charging-Sack-18x23x6cm-p-1017484.html?p=9B190738232242016024
Filament for the Frame - you pas your money and takes your choice, I would go with PETG, White Nylon or Black Carbonite, for the flexible material TPU or flexible PLA work equally well… If you go for a fun pack I could print an number of alternate parts. Http://Rigid.ink produce high quality filaments, its not work buying from another source unless it Verbatim on Amazon.
Please use this referral link to register with rigid.ink http://r.sloyalty.com/r/vrSCxj2CAs9i
PETG – Highly recommended - £28.96 produces a very strong durable Kwadhttps://rigid.ink/products/3d-filament-petg-testing-pack
Nylon 12 - Qty 10m, 1.75mm, £7.45 - easy to print - produce an exceptionally strong durable light Kwad
White only - https://rigid.ink/products/nylon-12-1-75mm-0-03-mm-tolerance-filament?variant=18130694471
Carbonite - Qty 10m, 1.75mm, £10.96, difficult to print. (This is our best option for a light, durable racing quad)
Black - https://rigid.ink/products/carbonyte-3d-printer-filament
ABS - Qty 10m, 1.75mm, Strong & durable, but difficult to print. 5 x 10m, 1.75mm, £13.96
Fun Pack - https://rigid.ink/products/abs-1-75mm-transparent-fun-pack-5-x-10m-samples?variant=52928311379
PLA - Many Colours beautiful Print Quality not as durable as Nylon, Carbonite or ABS… 5 x 10m, 1.75mm, £13.96
Fun Pack - https://rigid.ink/products/pla-fun-packs
PLA + A vibration absorbing and less brittle version of PLA, very durable. 7 x 5m, 1.75mm, £27.95https://rigid.ink/products/3d-filament-pla-plus-testing-pack?variant=52928450003
Battery and Camera mount TPU or Flexible PLA
Thermoplastic PolyUrethane - 1.75mm, 7 x 5m, £42.95. or 10m x 1.75mm £6.46
Fun Pack - https://rigid.ink/products/3d-filament-tpu-testing-pack?variant=52928122259
individual - https://rigid.ink/products/tpu-1-75mm-0-03mm-tolerance?variant=35362462471
Flexible - PLA 1.75 with 6 x 10mm for £26.95 or £4.96 each
Fun Pack - https://rigid.ink/products/3d-filament-flexible-pla-testing-pack
individual - https://rigid.ink/products/flexible-pla-1-75-mm-0-03-mm-tolerance-filament?variant=6520579329
Alternative Frame - Carbon - £30.49https://www.banggood.com/Exuav-145mm-Wheelbase-4mm-Arm-FPV-Racing-Drone-Frame-Kit-support-Runcam-Micro-Swift-Camera-43g-p-1212343.html?p=9B190738232242016024
Prop screws M2 x 7mm button head. Screwshttps://www.amazon.co.uk/dp/B01N572N7C/ref=cm_sw_r_cp_api_9KbGAb4KK10X3
Motor bolts - M2.5 x 8mm capped head x 16https://www.accu.co.uk/en/cap-head-screws/250408-SSCF-M2-5-8-A2-R360?uk_google_shopping=1&c=3&mkwid=s_dc&pcrid=247850430377&kword=&match=&plid=&gclid=Cj0KCQiAq6_UBRCEARIsAHyrgUzICY5FuvnkZHXYDiLGu6ExZ8IC3t941pCaabasyIv98IP864L44SIaAq92EALw_wcB
Arm screws - M1.2 x 4mm countersunk cross head self tapping screw…https://www.amazon.co.uk/sourcingmap®-M1-2x4mm-Phillips-Tapping-Fastener/dp/B01N0XITS3/ref=sr_1_fkmr1_1?s=diy&ie=UTF8&qid=1519146479&sr=1-1-fkmr1&keywords=M1.2+x+4+mm+cross+head+countersunk+self+tappers
RGB LEDs - WS2812 24 bit true colour LED - https://thepihut.com/products/adafruit-flora-rgb-smart-neopixel-version-2-sheet-of-20?variant=27739468241&gclid=EAIaIQobChMIi7_OpJG92gIVLrXtCh2GUQiREAQYASABEgLgtPD_BwE#fo_c=1889&fo_k=6260e390432f77b08b249b46914b621d&fo_s=gplauk
Firmware setting a lot more to come here…
Chrome App’s
Betaflight -
BL_Heli_S -
OpenTX - for TX & RX -
Custom mix settings
resource MOTOR 1 B00
resource MOTOR 2 B01
resource MOTOR 3 A03
resource MOTOR 4 A02
Motors
1 = 1
2 = 4
3 = 3
4 = 2
so CLI commands
resource MOTOR 2 A02
resource MOTOR 4 B01
save
resource MOTOR 1 B00
resource MOTOR 2 A02
resource MOTOR 3 A03
resource MOTOR 4 B01
Learning to fly a quad.https://uavcoach.com/how-to-fly-a-quadcopter-guide/
Similar models
grabcad
free
3D Printed Brushless Whoop mini FPV drone
...%2c307&sr=8-7
batteries:
https://www.amazon.co.uk/gp/product/b07q5rvxrf/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=utf8&psc=1
thingiverse
free
Mini Quad Racer 100mm Brushless GemFan 0806 6200kv 2S by Microdure
...//eu.fpvmodel.com/gemfan-2035bn-4-blade-propellers-purple-ccw-cw_g144.html?u=746e3c0c6edcf25e
https://www.facebook.com/microdure/
thingiverse
free
FPV Micro 125 by Bongo_1st
...tps://www.banggood.com/eachine-flyingfrog-q90-micro-fpv-racing-quadcopter-spare-parts-micro-1000tvl-hd-coms-camera-p-1129846.html
thingiverse
free
JST XH Balancer Connector Holder for 3S, 4S Lipo Battery by SnappyFPV
...od.com/?p=hp210612749272015022
flying fishkopp
fly hard or fly home! - fpv racer hamburghttps://www.facebook.com/flyingfischkopp/
thingiverse
free
Starter quadcopter with led and dronekeeper mini by mistyk
...harger-connectors-p-1004603.html?rmmds=search
add-on: can be powered directly dronekeeper via rcv-con dc 5v ~ 17v (lipo 2s ~ 4s)
thingiverse
free
Fatshark Battery Case for Batteries 18650B by zlowram
... explode if they are overheated. do it quickly and do it in several times if needed allowing to complete cool down the batteries.
cults
free
Mini Quad Racer 100mm Brushless GemFan 0806 6200kv 2S
...-bn-4-leaf-3mm-square-hole-cw-ccw-fpv-racing-propeller-p-1137626.html?p=ld020411878172015024
https://www.facebook.com/microdure/
cults
free
Woop 105mm Indestructible TPU 1103 7800kv 3S
...tml
lipo 2s :
https://hobbyking.com/fr_fr/turnigy-nano-tech-450mah-3s-65c-lipo-e-flite-compatible-blade-180cfx-eflb4503sj30.html
thingiverse
free
Lizard95 - ESC guard by Vidalcris
...good.com/fatshark-fat-shark-dominator-hd-v3-169-fpv-goggles-video-glasses-headset-with-hdmi-p-1093131.html?p=1s28068749769201701f
thingiverse
free
FPV Nano 85 by Bongo_1st
...tenna: https://www.banggood.com/eachine-5_8g-3dbi-brass-antenna-omnidirectional-ipex-port-for-vtx01vtx02vtx03atx03-p-1147689.html
Heliboy
thingiverse
free
DJI FPV TX Gimbal Protectors by heliboy
...em in position.
happy to print sets for anyone who hasn't got access to a 3d printer, for the cost of material & postage.
thingiverse
free
Martian 5" Quad Buzzer Mount by heliboy
...am.com/dowens234/
as always please; download, like and subscribe... please feedback if you would like changes made to the design.
thingiverse
free
Reuleaux triangle by heliboy
...rd euler - 1781- paper on de curvis triangularibus.
i used grey pla from https://rigid.ink but you can use any colour you wish:-)
thingiverse
free
Reverb GoPro Session 4/5 Session Mount by heliboy
... you have a dual extruder then you can use a support material such as pva.
happy to print for you if you don’t have a 3d printer…
thingiverse
free
Simple Fidget Spinner - 608RS bearing by heliboy
...bought herehttps://rigid.ink/products/pla-fun-packs
as always i would really would appreciate your feedback and improvment ideas.
thingiverse
free
TPU Soft Motor Mount by heliboy
...rom 3 layers of electrical tape.
parts list:
tpu £5.95https://rigid.ink/products/tpu-1-75mm-0-03mm-tolerance?variant=33837865863
thingiverse
free
TRIUMPH T140 Kill Switch by heliboy
... became known as 'harris' or 'devon' bonnevilles.
referenceshttps://en.wikipedia.org/wiki/triumph_bonneville_t140
thingiverse
free
Martian-255 Quadcopter - HS1177 Camera Backplate Spacer by heliboy
...am.com/dowens234/
as always please; download, like and subscribe... please feedback if you would like changes made to the design.
thingiverse
free
GoPro Session Mount 25 degree v2.0 by heliboy
...ore space front to back for the gopro...
the print has been designed not to require supports
please let me have your feedback...
thingiverse
free
Alien 5" Radio Tray by heliboy
...am.com/dowens234/
as always please; download, like and subscribe... please feedback if you would like changes made to the design.
Petg
turbosquid
$9
Chandra rugs T-PETG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$6
Makita lawn mower motor cover
...makita lawn mower motor cover for print . plastic petg carbon or...
3d_export
$5
snorkel connector snorkel bracket snorkel holder
...free to comment or cantact me via dm. pla, petg and abs should be fine for printing although i...
3d_export
$8
mounting of a front wing of the bicycle for a fork rockshox
...20 mm. 3d printing settings plastic - nylon / petg rafts - yes. supports - yes. resolution - 0.16...
3d_export
$15
E30 tweeter pods speaker mounts
...plastic, interlayer adhesion is poor, i want to try petg ...
3d_export
free
danish lunch
...made in thindercad and printed on ender3 max,<br>i used petg filament and have painted with vajjejo model paint.<br>this is...
3d_export
$21
stock adapter grand power stribog
...from cyma zhukov and install stock on new adapter. petg settings 0,10 - 0,15, infill 100%, supports everywhere, brim....
3d_export
$7
shimano xt-slx brake level piston guide right top
...with printed parts: i recommend: plastic - nylon / petg rafts - yes. supports - yes. resolution - 0.16....
3d_export
$7
shimano xt-slx brake level piston guide left top
...with printed parts: i recommend: plastic - nylon / petg rafts - yes. supports - yes. resolution - 0.16....
3d_export
$29
cup holder b m w e90-91-92-93
...cup holder b m w e90-91-92-93 3dexport printed with petglt;br>infil 20-40%<br>speed: 50mm/s<br>i make this design for people who don't...
Micro
3ddd
$1
Micro
...micro
3ddd
автобус
turbosquid
$80
MICRO
...ty free 3d model micro for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1700743)
3ddd
$1
JBL Micro Wireless
... micro , колонка , плеер
jbl micro wireless
turbosquid
$10
Suppressor Micro
...quid
royalty free 3d model suppressor micro for download as on turbosquid: 3d models for games, architecture, videos. (1380433)
turbosquid
$20
Micro Meter
...osquid
royalty free 3d model micro meter for download as fbx on turbosquid: 3d models for games, architecture, videos. (1350448)
turbosquid
$7
NIghtstand Micro
...d
royalty free 3d model nightstand micro for download as max on turbosquid: 3d models for games, architecture, videos. (1248117)
3ddd
$1
Micro wind turbine
...micro wind turbine
3ddd
турбина
micro wind turbine for your green building projects
turbosquid
$29
Micro Speakers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Micro Servo.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Micro cells
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Quad
design_connected
$4
Quad
...quad
designconnected
brent comber quad computer generated 3d model. designed by comber, brent.
turbosquid
free
Quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$69
Quad bike
...uad bike
3docean
bike hi-poly moto quad quad bike quadbike
high-poly model quad bike. model uses mental ray materials and render.
3d_export
$14
quad bike
...quad bike
3dexport
3d_export
$50
Quad 3D Model
...quad 3d model
3dexport
quad atv
quad 3d model floris 64690 3dexport
turbosquid
$8
Space quad
...bosquid
royalty free 3d model space quad for download as stl on turbosquid: 3d models for games, architecture, videos. (1366239)
turbosquid
free
Ornament quad
...quid
royalty free 3d model 3d ornament quad for download as on turbosquid: 3d models for games, architecture, videos. (1628075)
turbosquid
$19
Quad Drone
...
royalty free 3d model quad drone for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1202459)
turbosquid
$150
Quad bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Lego quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Edition
turbosquid
$33
Natuzzi Editions
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Guitar_MJ-Edition
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Editable Fountain
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Kueco Edition Palais
...kueco edition palais
3ddd
keuco
зеркальный шкаф kueco edition palais
design_connected
$16
369 Classic Edition
...369 classic edition
designconnected
walter knoll 369 classic edition computer generated 3d model.
3ddd
$1
Martz Edition
...martz edition
3ddd
martzedition
http://www.martzedition.com/a-500-3
3ddd
$1
Martz Edition
...martz edition
3ddd
martzedition
http://www.martzedition.com/b-400-3
design_connected
$25
Chester - Limited Edition
...nnected
established & sons chester - limited edition computer generated 3d model. designed by future systems, amanda levete.
3ddd
$1
KROKEN LIMITED EDITION
...d
rochebobois
autumn/winter collections 2012 rochebobois paris
kroken limited edition armchairhttp://m.roche-bobois.com
3ddd
$1
stilwerk limited edition
...stilwerk limited edition
3ddd
3000х1200х750
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур