Cults
140 Sized Quadcopter - By 3DEX
by Cults
Last crawled date: 6 years, 2 months ago
This is our 140-size quadcopter frame that is easy to print, easy to assemble and easy to fly. We have found that the frame is virtually indestructible. We made it using our Black ABS filament.
Be sure to buy your 3D printer filament from www.3dexfilament.co.uk if you want the same great results!
We wanted to design a small quadcopter frame that could be printed on most standard sized 3D printers. However, we also wanted the quadcopter to be able to use standard sized electronics. Therefore, we decided to make the motor mounts larger (this frame will accept 22-XX sized motors). This then created a need for wider frame arms. We also designed the frame for a standard sized flight control board. We ran a Naze32 but intent to fit a Raceflight Revolt soon.
The frame is big enough to run 3.5" props which we would recommend. After using only 3" props we upgraded to 3.5x4.5" props for better flight characteristics. This quad frame would be an excellent FPV racer and we will be updating this design to include an FPV camera and TX mount that will go above the flight control board.
Please check out www.3dexfilament.co.uk for more information about us and how we can help you with 3D printing.
Be sure to buy your 3D printer filament from www.3dexfilament.co.uk if you want the same great results!
We wanted to design a small quadcopter frame that could be printed on most standard sized 3D printers. However, we also wanted the quadcopter to be able to use standard sized electronics. Therefore, we decided to make the motor mounts larger (this frame will accept 22-XX sized motors). This then created a need for wider frame arms. We also designed the frame for a standard sized flight control board. We ran a Naze32 but intent to fit a Raceflight Revolt soon.
The frame is big enough to run 3.5" props which we would recommend. After using only 3" props we upgraded to 3.5x4.5" props for better flight characteristics. This quad frame would be an excellent FPV racer and we will be updating this design to include an FPV camera and TX mount that will go above the flight control board.
Please check out www.3dexfilament.co.uk for more information about us and how we can help you with 3D printing.
Similar models
cults
free
FPV Racing Quadcopter Extreme Design - By 3DEX
...3d printable things. since we love fpv racing we design a lot of things to do with quads and rc. please follow us to learn more.
cults
free
Macbook Stand - By 3DEX
... information. alternatively you can contact us via email at support@3dexfilament.co.uk we always love to chat about 3d printing!
cults
free
Easy-to-print Watch Stand
...ld love to know your feedback. we are based in the uk. we now offer free shipping on all our orders place in our online web store
cults
free
11XX 22XX 14XX 13XX TPU Soft Mount Pads Quadcopter Vibration Dampener Every Size
...you!
for best results, print these in super flexible ninjaflex tpu.
don't own a 3d printer? no problem! buy these on ebay.
cults
free
Easy to print USB/SD card holder
...lament.
we hope you enjoy our 3d printable designs and we look forward to publishing more designs for you.
regards,
3dex ltd
cults
free
iPhone 6/6S Plus Bumpers
...
please check out our website for more free downloadable designs and all of your filament needs:
http://www.3dexfilament.co.uk
cults
free
Easy to print Inductrix Quadcopter Frame
...ad frame. heavier than original frame, but pretty robust as well.
normal frame file for 0.5 nozzle, thin file is for 0.4 nozzle.
cults
$10
Folding Quadcopter 450 Frame
...
assembly diagram in the "copter assembly.stl" file.
the number of items for printing is indicated in stl name.
enjoy!
cults
free
Piko BLX Adapter TPU 30,5X30,5mm For Micro Flight Controler 20x20mm - Furious FPV
...store:
https://www.drone-fpv-racer.com/piko-blx-micro-flight-controler-furious-fpv-980.html
https://www.facebook.com/microdure /
cults
free
Tiny Whoop 68mm polycarbonate cross fashion
...?rmmds=myorder?p=ld020411878172015024
lipo 1s nanotech 260mha = 3min flight
8 x m1.6 x 5mm
https://www.facebook.com/microdure/
3Dex
cults
free
Macbook Stand - By 3DEX
... information. alternatively you can contact us via email at support@3dexfilament.co.uk we always love to chat about 3d printing!
cults
free
FPV Racing Quadcopter Extreme Design - By 3DEX
...3d printable things. since we love fpv racing we design a lot of things to do with quads and rc. please follow us to learn more.
cults
free
Easy to print USB/SD card holder
...card holder space saver usb stick micro sd card 3dex filament here is our easy-to-print usb and sd card...
cults
free
Easy-to-print Watch Stand
...printed parts. please visit our website for more information (http://www.3dexilament.co.uk). we enjoy 3d printing and would love to know...
cults
free
iPhone 6/6S Plus Bumpers
...free downloadable designs and all of your filament needs: http://www.3dexilament.co.uk ...
140
cults
free
3D-printable lampshade for standard light fixture (concentric perforated shading walls)
...direct line-of-sight to the lightbulb. the single stl-file measures 140 x 140 x 140 mm, including the built in...
cults
free
Double sided Dice/Card Box
...it for the dice masters game. it holds approx. 140 dice in the dice area and 140 cards plus...
cults
free
Funnel with airtube for faster fillin
...to 140 %. 100%=15.5 mm diameter on the infill 140=21,2 mm diameter on the infill and 26 mm after...
cults
$5
Trash can
...a small bin height of the bin without lid: 140 mm height of the trash with lid: 211 mm...
cults
free
Anet A8 storage boxes
...with 2 m3 30mm screws and two m3 nuts (140 * 50 * 4) the assembly is modular: the...
cults
$1
Box Clothes peg
...for clothes pegs she made 100 * 116 * 140 mm with an ance i created 2 files: -...
cults
free
Modular Castle Playset (3D-printable)
...3d-printed in a build volume of 140 x 140 x140 mm. the walls and towers fit together easily using...
cults
free
Pattern Blocks, Math, Geometry, Art
...about sketching and constraints. the all-in-one design fits a 140 x 140 platform; the square therein has a side...
cults
$1
toilet roll holder
...the time of the commission;). dimension structure: width = 140 mm length = 175.6 mm height = 101.3 mm...
Quad
cults
free
Drone-bot quad
...drone-bot quad
cults
robot bot futuristic future quad fly drone art toy toy
drone-bot quad serie z-22
cults
free
Mount on FPV250 quad for Naza
...mount on fpv250 quad for naza
cults
mount on fpv250 quad for naza
cults
free
Quad Cane Foot Replacement
...quad cane foot replacement
cults
quad cane foot replacement part.
cults
free
OpenRC 220 FPV Mini Quad
...openrc 220 fpv mini quad
cults
openrc 220 fpv mini quad
openrc 220 fpv mini quad
cults
free
Bepo - Universal Phone Quad-Pod
...bepo - universal phone quad-pod
cults
bepo - universal phone quad-pod
bepo - universal phone quad-pod
cults
free
GoPro mount for FPV250L quad copter
...gopro mount for fpv250l quad copter
cults
gopro mount for fpv250l quad copter
gopro mount for fpv250l quad copter
cults
free
Armattan F1-acro quads series buzzer
...armattan f1-acro quads series buzzer
cults
buzzer builder armattan f1-addicts quads series ninjaflex semiflex
cults
free
360 Camera Mount for OpenRC Mini Quad
... action camera onto the openrc 220 fpv mini quad (link below)
more info on the xiaomi 360 camera here here: http://bit.ly/2u8akzh
cults
free
Quad Hex Nut Cat Spinner
... version
compact
easy to print
uses 4x 5/16" hex nuts
uses 1x 608zz (22x7) bearing
my prints of this thing spin really well
cults
free
360 Camera Mount for OpenRC Mini Quad
... action camera onto the openrc 220 fpv mini quad (link below)
more info on the xiaomi 360 camera here here: http://bit.ly/2u8akzh
Quadcopter
cults
$10
quadcopter keychain
...uadcopter quad drone quadricottero
quadcopter keychain with spinning props
if prolellers is too tight scale quad2.stl at 102-105%
cults
free
OpenRC Quadcopter (Beta)
...openrc quadcopter (beta)
cults
openrc quadcopter (beta)
openrc quadcopter (beta)
cults
$25
Drone Quadcopter
...drone quadcopter
cults
quadcopter drone
quacopter avec des élices 10" capable de porter 1kg
100% imprimé 3d
cults
free
Quadcopter T-1
...table quadcopter. we take you to the sky. you take it from there. hack, experiment, imagine new ways to launch your geeky vision.
cults
free
Easy to print Inductrix Quadcopter Frame
...ad frame. heavier than original frame, but pretty robust as well.
normal frame file for 0.5 nozzle, thin file is for 0.4 nozzle.
cults
free
JJRC H11D quadcopter legs
... from your printer to your drone with ease, snap right into place.
print with 0% infill and use supports ( they clean off easy)
cults
free
Quadcopter 915F
...ini in a world of jeeps. cutaway chevrons, sleek propellers and elegant proportions lift this high-concept quad above the rabble.
cults
free
Skeleton X-14 Quadcopter
...en lighter build—and the chance to show off all its inner workings. this 3diy project is available as a free download to 3d print
cults
$10
Folding Quadcopter 450 Frame
...
assembly diagram in the "copter assembly.stl" file.
the number of items for printing is indicated in stl name.
enjoy!
Fpv
cults
free
FPV kit for Turnigy 9XR
...fpv kit for turnigy 9xr
cults
fpv kit for turnigy 9xr
fpv kit for turnigy 9xr
cults
free
FPV Antenna replacement Cap
...fpv antenna replacement cap
cults
fpv antenna replacement cap
fpv antenna replacement cap
cults
free
FPV Race Gates
...oiled drone uav dji drone_racing fatshark fpv_racing gopro qav250 quadcopter race_gates
make some cheap and easy fpv race gates.
cults
free
OpenRC 220 FPV Mini Quad
...openrc 220 fpv mini quad
cults
openrc 220 fpv mini quad
openrc 220 fpv mini quad
cults
free
GoPro Session and FatShark FPV Mount
...gopro session and fatshark fpv mount
cults
gopro session and fatshark fpv mount
gopro session and fatshark fpv mount
cults
$2
DRONE FPV 280
...e 10 m3x16
2204 or 1806 brushless motor
esc in the body
5 or 6 "propeller
700 or 800 tvl camera
cc3d silentbloc or other ...
cults
free
10 Degree FPV Camera Mount
...unt
cults
fpv hobby quadcopter
this fits the hobby king quanum complete fpv goggle and camera kit,
also fits 30x30x10mm cameras
cults
$1
Base for FPV Gate
...al pieces will fit perfect with those square pins. forming a nice long base for fpv racing gate for micro fpv racing quadcopters.
cults
free
20 Degree FPV Camera Mount
...ch_video_tx_rx_cp_antennas_and_camera_pnf_.html)
also fits 30x30x10mm fpv cameras
[turn design on side for best print results]
cults
free
Pan, tilt and roll camera pod for FPV.
...pan, tilt and roll camera pod for fpv.
cults
pan tilt and roll camera pod for fpv.
pan, tilt and roll camera pod for fpv.
Racing
cults
free
Car race in progress
...car race in progress
cults
car running race race
car dimensions for school project current race.
cults
free
Rear wheel race in progress
...race running race car model for school project motor racing in progress. with the right...
cults
free
FPV Race Gates
...cults fpv race spoiled drone uav dji drone_racing fatshark fpv_racing gopro qav250 quadcopter race_gates make some cheap and easy...
cults
free
tutute racing circuit
...cuit
cults
tutute bolide circuit car child toy
small part circuit tutute racing car.
i will do another part if it interests me.
cults
free
Tiny Whoop Race Gate $0.50
...ce gate $0.50
cults
using 3/16" dowel from the home depot you can make a tiny whoop race gate to the size of your choosing!
cults
free
Q3D 220 FPV Racing Frame
...perior material for racing but this is a fun build that can be put together very cheaply and will fly just as well. #growthehobby
cults
$3
Lumenier qav-x race pod gopro mount
...lumenier qav-x race pod gopro mount cults gopro fpv racing quadcopters freestyle luminier qav-x qav210 realacc lumenier qav-x race...
cults
$3
Race car Speedstream
...l inspired by a famous model porsche carrera. it is suitable for adults and kids.
for axle, we use 2mm thick bike spokes :d
cults
$1
Inductrix / Tiny Whoop light racing frame
...s, black is esun abs plus / pro, translucent orange is esun petg.
short video of flight:
https://goo.gl/photos/sryxmps8okynhrsz9
cults
free
Simple, Easy Quadcopter/FPV Racing Drone
...as that's what it looked the best in, but acrylic is definitely not the strongest material choice as it's super brittle.
Quality
cults
free
Zeepro Zim Quality Test - Nuts & Bolts
...y test - nuts & bolts
cults
zeepro zim quality test - nuts & bolts
zeepro zim quality test - nuts & bolts
cults
$2
necklace and earring Indochine
...earring indochine cults necklace jewelry loop hear indochine magnificent quality here is a beautiful necklace and earring indochine, which...
cults
free
Coffee Tamper
...will help you pack the grounds evenly for a quality shot. use this tool to avoid...
cults
free
Mini keychain gears paradoxical
...same direction. it is best to print in high quality thoroughly trim the sprockets, adjust the axles. nop21 ....
cults
free
Bilboquet
...ball of 8 cm in diameter. sorry for poor quality ...
cults
free
BRACELET
...bracelet - 68 mm diameter. optimized for best printing quality on fdm printers and support...
cults
free
3D printed Violin • VLNLAB: VLA (Viola)
...to build the vlnlab vla - the first 3d-printable, concert-quality ...
cults
free
WALL HANGER
...wall hanger cults minimal wall hanger. optimized for best quality on fdm printers, support free and doesn't need glue...
cults
$4
WINE BOTTLE EARRING
...earring women special jewelry for special women who love quality wines and want to try something...
cults
$1
1UP
...1 + up of mario bros. print in high quality in a size bigger than 5cm so that it...
High
cults
free
High Temple
...high temple
cults
high temple
high temple
cults
free
high resolution Whale
...high resolution whale
cults
whale high resolution
high resolution whale
cults
$4
monster high skull
...monster high skull
cults
monster high skull model and printed just for fun
cults
free
polarbear high resolution
...polarbear high resolution
cults
animals polarbear toy
sleepy polarbear high resolution 3d printed!
cults
free
High resolution tyrannosaurus
...high resolution tyrannosaurus
cults
dinosaur t-rex trex
high resolution tyrannosaurus 3d printable
cults
free
Ammonite High Heel Shoe
...ammonite high heel shoe
cults
ammonite high heel shoe
ammonite high heel shoe
cults
free
Horse High Heel Shoe
...horse high heel shoe
cults
horse high heel shoe
horse high heel shoe
cults
free
Squirrel High Heel Shoe
...squirrel high heel shoe
cults
squirrel high heel shoe
squirrel high heel shoe
cults
free
Lion High Heel Shoe
...lion high heel shoe
cults
lion high heel shoe
lion high heel shoe
cults
free
Monsters high skull pendant
...monsters high skull pendant
cults
monsters high skull pendant
monsters high skull pendant
Filament
cults
free
Filament clip / Universal filament clip
...t clip
cults
pliers filament clip universal
here is a new model of filament clip, finally there it would be more a filament clamp
cults
free
filament joiner
...filament joiner
cults
filament joiner
filament joiner
cults
free
Guide filament
...
cults
filament prusa i3
compatible with the filament holder, it allows to guide the filament in order to facilitate the printing
cults
$1
Filament keepers
...t keeper
a set of 5 filament keepers got 1 with a spool of filament and made these in sketchup since i needed a gob more of them
cults
free
Filament Door
...filament door
cults
door filament
filament holder for geeetech prusa i3.
m8 threaded rod to secure the whole
cults
$1
Spool on the filament
...spool on the filament
cults
spool filament
design in catia v5
cults
free
Filament clip
...in addition, when you take the reel out of the printer, just pass the filament in one of the holes, and it no longer takes place.
cults
free
Filament Duck - filament spool stand (94/64mm)
... duck - filament spool stand (94/64mm)
cults
filament duck - spool stand (94/64mm)
filament duck - filament spool stand (94/64mm)
cults
free
Filament holder
... one to fit all the different sizes of filament spools.
it’s very fast and easy to change the filament. :-)
printed in white abs
cults
free
Filament Clip, Filament Holder, Filament Keeper
... the same clip but with a smaller opening so that it will tightly fit on spools with thinner sidewalls. let me know how it works.
Sized
cults
free
Green pearl ring (size 5)
...green pearl ring (size 5)
cults
green pearl ring (size 5)
green pearl ring (size 5)
cults
free
Puzzle gift boxes in various sizes
...ludes a box designed to take a £20 (as pictured) and a box designed to take a stack of £1 coins, plus various other sizes of box.
cults
$1
Superman Ring (sizes US 6 - 12)
...g to this ring size chart but these have not been tested.
the smaller sizes may pose a tricky print as with anything small/thin.
cults
$2
Batman Rings (sizes US 6 - 12)
...g to this ring size chart but these have not been tested.
the smaller sizes may pose a tricky print as with anything small/thin.
cults
$8
Pumpkin cookie cutter - size 10cm
...e cutter design for cookies cutting.
size of wall for cutting 0,8mm.
nozzle for printing 0,4mm
printing time app. 1hour 15minuts.
cults
free
Sub Zero Mask - Full Size. Mortal Kombat
...sub zero mask - full size. mortal kombat
cults
sub zero mask - full size. mortal kombat
sub zero mask - full size. mortal kombat
cults
free
CalorieMate Case (half size)
...dded "minimal" version (must remove paper box), and modified door's "barbs" height 0.4mm -> 0.6mm.
cults
free
base large size (4 squares, or 10 feet)
... base role pathfinder dyd mini
a base of pathfinder to have minis as big size, with this base you can stage the enlarge person: p
cults
free
Full Sized Halo Plasma Pistol
...d up the details with acrylic paint.
print settings:
layer height: 0.3mm
infill: 20%
print time: ~34 hours
filament used: ~0.6kg
Printing
cults
$1
Domoidalite print
...the geometry than my humble machine could print out. it's still fun to look at the details inside with a flashlight though :p
cults
free
3D Printed Stool
...3d printed stool
cults
3d printed stool
3d printed stool
cults
free
Bow easy to print
...bow easy to print
cults
bow easy to print
bow easy to print
cults
free
3D Printed Clock
...3d printed clock
cults
3d printed clock
3d printed clock
cults
free
Printed Google Cardboard
...printed google cardboard
cults
printed google cardboard
printed google cardboard
cults
free
Cat 3D printed
...cat 3d printed
cults
animals cat toy
cat 3d printed
cults
$1
Matryoshka (print-in-place)
...matryoshka (print-in-place)
cults
the very first matryoshka print-in-place model!!, no needed to separate parts.
enjoy!
cults
$1
halloween 3d model for printing
...model for printing
cults
halloween 3d printing printing 3d design funny party subdivision lowpoly
halloween 3d model for printing
cults
free
3D Printed Light Bulb
...3d printed light bulb
cults
3d printed light bulb
3d printed light bulb
cults
free
3D Printed Unicorn Horn
...3d printed unicorn horn
cults
3d printed unicorn horn
3d printed unicorn horn