100mm rotor for Pull-O-Copter (rotor only) by vapefreak

Last crawled date: 3 years ago

I redesigned the 100mm rotor from the original set, so it has also some kind of a connection type thing...
The rotor flies quite nicely.
Check out the original!
Print Settings
Infill: 100%
Layer: 0,2mm
Support: yes
Raft: no
Print-time: approx. 2h
Used filament: Sunlu Baby Pink (PLA+)https://www.amazon.de/SUNLU-Filament-Printing-Dimensional-Accuracy/dp/B075H5YHJX/ref=as_li_ss_tl?ie=UTF8&qid=1518248146&sr=8-2-fkmr1&keywords=sunlu+pla+rosa&th=1&linkCode=sl1&tag=vapefreak-21&linkId=638e5ee6531ae075b72b128f3ddf7936
I used the following tape on my CR-10:https://www.amazon.de/SUNLU-Filament-Printing-Dimensional-Accuracy/dp/B075H5YHJX/ref=as_li_ss_tl?ie=UTF8&qid=1518248146&sr=8-2-fkmr1&keywords=sunlu+pla+rosa&th=1&linkCode=sl1&tag=vapefreak-21&linkId=638e5ee6531ae075b72b128f3ddf7936
This stuff is really great, no extra glue needed, 100% sticky to the printed parts, which come off really easily, even without destroying the tape.
Extra Tip
Another very hot tip is to use kapton tape! Here you get the glossy finish and perfect adhesion like with the blue tape! Look at this:
200mm Kapton tape: https://www.amazon.de/SUNLU-Filament-Printing-Dimensional-Accuracy/dp/B075H5YHJX/ref=as_li_ss_tl?ie=UTF8&qid=1518248146&sr=8-2-fkmr1&keywords=sunlu+pla+rosa&th=1&linkCode=sl1&tag=vapefreak-21&linkId=638e5ee6531ae075b72b128f3ddf7936
Have fun!
(Amazon Affiliate Links)