#002_Douglas A-26 «Invader» /PART №_2126539 3d model
3dmdb logo
GrabCAD
#002_Douglas A-26 «Invader» /PART №_2126539

#002_Douglas A-26 «Invader» /PART №_2126539

by GrabCAD
Last crawled date: 1 year, 11 months ago
PART №_2126539 - TUBE ASSEM. ELEV. TRIM TAB TORQUE

INTRODUCTION
Douglas A-26 «Invader» — American short-range bomber, attack aircraft. It made its first flight on July 10, 1942. In total, about 2,500 cars were built.
In 1948-1966, it was designated B-26, which sometimes leads to confusion with the same designation and similar purpose of the B-26 "Marauder" bomber, which was withdrawn from service by that time.

Construction
All-metal monoplane, high-wing. The wing is straight with almost no narrowing. The twin-engine Invader had only one pilot, which was unusual for American designs of those years.
I took the technical materials for reference here: https://buildandfly.shop
DS CATIA V5R21
Link to image #1: https://upload.wikimedia.org/wikipedia/commons/d/d2/Douglas_B-26K_Counter_Invader_USAF.jpg

I will be very happy to receive your suggestions and comments.
Thanks!)

Tags