thingiverse

free

mixing paddle on 6mm rod threaded for resin

...dle on 6mm rod threaded for resin thingiverse mixing paddle on 6mm rod threaded for resin. fold it all together screw in the rod

thingiverse

free

Spear Tip Trident with 6mm standard thread by Nys1

...spear tip trident with 6mm standard thread by nys1 thingiverse spear tip trident with 6mm standard thread, 80mm....

thingiverse

free

bearing spacer for 6mm threaded rod by jjames007

...bearing spacer for 6mm threaded rod by jjames007 thingiverse spacer

thingiverse

free

GoPro Mount to Any 6mm Threaded Camera by ThePyroCreator

...go-pro rig using the 6mm threaded hole on the base of the camera. requires a metal 6mmx15mm threaded rod to screw into the camera

thingiverse

free

Holder for 6mm threaded rod projects by LALAG

...designed this simple set for vertical mount of a 6 mm threaded rod. used to holda bearing seperated vawt windmill (thing:4078376)

thingiverse

free

Ender 3 v2 Filament Spool 6mm BB Bearing by Threaded

...ender 3 v2 filament spool 6mm bb bearing by threaded thingiverse another 6mm bb used as a bearing

thingiverse

free

X-motor&idler for Prusa i3 rework for 6mm threaded rod by Alex_Post

...lex_post thingiverse this is version of the elements of the x-axis for 6 mm threaded rods and nuts 6mm printer prusa i3 rework.

thingiverse

free

6mm thread ball bearing for filament storage by Zigzach123

...e push fitting will be allowed to rotate freely as your filament decreases. the tube fitting is threaded for 1/2"-20 thread.

thingiverse

free

Temperature sensor(6mm) adapter for 1/2 ntp threaded tube by michalow204

... electric water heater. use teflon tape to seal the connections and enjoy the simple method of making your old heater more smart.

thingiverse

free

3/8 threaded rod to keyed 6mm shaft con-helical coupler by tray_withdraw

...uple the 6mm shaft of a dc hobby motor to a 3/8" threaded rod to make a cheap linear actuator. used m3 screws and hex bolts.

thingiverse

free

5 start 6mm ball thread and nut by Fillitup309

...e nut slightly off of the screw and push the rest of the balls upward into the nut. it doesn't have to be completely packed.

thingiverse

free

**UPDATED** Phantom 2 lock nut 6mm thread CW and CCW by KushalWagle

... 2 vision + drone. it has 6mm thread (right hand and left hand). print both the lock nut files twice. enjoy piloting the phantom.

thingiverse

free

Z axis isolator for Mendel90 w/ 6mm threaded rod by goopyplastic

...90 w/ 6mm threaded rod by goopyplastic thingiverse use these z isolators to remove some of the z wobbles on nopheads dibond kit.

thingiverse

free

Ormerod extruder for Pneumatic fitting with 6mm thread by donrecardo

...s the pneumatic fitting , it always looked to me that the filament would soon wear through the extruder body on the standard part

thingiverse

free

Foldable Wall Hook for 6mm Threaded Rod (Print in Place) by MacGyver

...t in place) by macgyver thingiverse basically i loved the folding hook design and decided to adapt it to use on my dremel stand.

thingiverse

free

Filament Spool Holder Stand Using 6mm Threaded Rod by hyOzd

... supposed to be assembled with 8mm rod and 608 bearing. it can hold wheels that have holes in these diameters: 48 mm 52 mm 100 mm

thingiverse

free

Hictop Bowden block, for 6mm threaded by shocksofmighty

... way down to heat break -modify thickness slightly for better alignment -add holder of m3 nuts (much easier to screw in this way)

thingiverse

free

Modular nozzle board standard 6mm thread by RickTizzy

...l and does grow (cheap chinese steel nozzles are quite a find) i chose to make a modular storage system rather than a fixed size.

thingiverse

free

Ball Joint Filament Guide - 6mm threaded bowden coupling by Stickylizard

...e this is designed with the intention of using 3m double sided pads to secure it. feel free to remix with a hole if you need it.

thingiverse

free

front reinforcement with threaded bar by Mario000

...front reinforcement with threaded bar by mario000 thingiverse 6mm threaded bar

thingiverse

free

6mm Thumb Knob by Technoferret

...6mm thumb knob by technoferret thingiverse this is designed to fit a standard 6mm thread nut or bolt.

thingiverse

free

Pneumatic Coupling PC4-M6 - 4mm OD PTFE Tubing - 6mm Thread by tezz

...modifications, thanx i always add the original creation file not just the stl, so if people want to play with the design they can

thingiverse

free

Wine whip extension rod by johnbfoster

...r wine degassing tool. 8mm outer diameter, 6mm male thread on one end, 6mm female thread on other. i have not printed this yet.

thingiverse

free

Square T-Nut for 6mm slots by melipharo

...are t-nut for 6mm slots by melipharo thingiverse square t-nut for 6mm slots. you need to make an m3 thread by youself inside it.

thingiverse

free

Shaft adapter 6mm to 8mm by jbeale

...it in place, instead of forcing the threaded rod's threads into the plastic like a tap. that allows the...

thingiverse

free

Clamping Knob - 6mm nut by qystan

...6mm nut thickness = 5mm nut across flat =10mm nut recess may be slightly under sized. heat the nut slightly and press into place.

thingiverse

free

5kg 3d Printer Filament Roller

...iverse 5kg spool holder. 6mm/m6 - 10mm/m10 threadded rod required for core. 22mm bearing will fit in shaft and on threadded rod.

thingiverse

free

Filament Holder by fablabjundiai

...ter (use 6mm threaded bar + washers and m6 nuts). suggested for filaments that do not fit or spin on the printer's own stand.

thingiverse

free

Fireplace plug by Masa_1

... from fireplace. it has 6mm thread. edit: added version that has 6mm nut inside print. i user prusa colorprint to get it done.

thingiverse

free

Tronxy X8 Bracing by edugargon

...table with threaded rods of 5-6mm, helping to avoid vibrations on the x-y axis. for rods more than 6mm the holes should be filed.

thingiverse

free

Fillamentum spool holder by blindp

...fillamentum spool holder by blindp thingiverse print 2x and you need 2x 6203 bearing and threaded bar 6mm

thingiverse

free

z axis motor connector prusa i3 by marcomx

...rse motor connector for z axis, for a 5mm or 6mm thread rod fits m5 thread any tips will be much appreciated, but not necesary,

thingiverse

free

Hedgehog or Hamster Bearing Training Wheel by HisunSA

...ill add a washer between the wheel and stand as well. i used two nuts to lock the nuts on either side of the shaft/threaded bar.

thingiverse

free

Fitting adapter from 4 to 6mm PTFE tube by magonegro

... i finished my stock of 9mm thread adapters and got a bunch of 13mm ones. the adapter is the same except for the thread diameter.

thingiverse

free

Chinese Leather Shoe Patcher (CLSP) Thread Stand by Fusilier

...also needed a 6mm tap to clean out the threads on my clsp to get my threaded rod to...

thingiverse

free

5-6mm Clips by Laleyenda

...tic sheild on scooter, bikes, motorcycles ect. when printed just take a tap to the current size og thread the hole. 1x 5mm 1x 6mm

thingiverse

free

Hotend Heatsink/Mount by Bois3D

...heatsink block that the 6mm threaded heat break rod threads into. this allowed me to run cooler hotend temps...

thingiverse

free

Dry box Bowden guide by Sandow50

...issue and allows free feeding off the spool. outside threads are 1/2-13 and the inside threads are standard 6mm...

thingiverse

free

Distance Bolt M3x10 by Golkun

...uld be compatible with many cad programms. spannerwidth: 6mm outer thread length: 4mm inner thread length: 6mm corpuslength: 10mm

thingiverse

free

608 Bearing Block - 6mm, 1/4" - 20mm by spingoogL

... to be used with 1/4" or 6mm threaded rod framework. the location of the threaded rods would also act a a bearing retainer.

thingiverse

free

Threaded grease cap with M6 threaded hole for grease fitting by JaronLindow

...threaded hole for grease fitting by jaronlindow thingiverse outer threads are 1.9685 inch in diameter, at 24 threads per...

thingiverse

free

Plant pot hook ring

...plant pot hook ring thingiverse plant pot hook ring. to fix it use 2 superb thread screws for 6mm boxwood.

thingiverse

free

cross brace Ender extender 550mm high by crazydutchman

...hreaded rods m6 (6mm), 800mm long, 4 m6(6mm) nuts, 10mm socket wrench, m6 bolt on the top to secure the brace to the 2020 profile

thingiverse

free

Avid brake bleed adapter (M5 screw to 6mm tube) by LSM87

...eed. be careful with the thread (when printed in pla)! it might break and get stuck in your brakes. better use sturdier filament.

thingiverse

free

Scalpel handle for BAYHA Blade by Pcbrenner

...handle for bayha blade by pcbrenner thingiverse m4*5 - 6mm screw for better grip of the blade, cut m4 thread in the smaller hole

thingiverse

free

C-3PO large chest button by TKCC71

...71 thingiverse this was the large chest button. there is a hole in the bottom for a m4 bolt to thread in. the hole depth is 6mm.

thingiverse

free

Plastic drum - BSP adapter by moose4621

...m - bsp adapter by moose4621 thingiverse an adapter from a course 6mm pitch triangular thread found on 200l plastic drum to bsp.

thingiverse

free

WC Holder Nut 6mm by Rattiso

...wc holder nut 6mm by rattiso thingiverse nur noch ein 6 mm gewinde schneiden only 6 mm of thread cut :)

thingiverse

free

Mendel prusa diagonal strengthening by how_eee

...ndel prusa diagonal strengthening by how_eee thingiverse uses 6mm threaded rod 370-400mm length. i printed it in abs 35% infill.

thingiverse

free

Footed vertex for Huxley by DigiFab

...ey by digifab thingiverse this is a footed vertex for reprap huxley. holes will work with either 1/4" or 6mm threaded rods.

thingiverse

free

Epoxy mixer by Gudis1975

...udis1975 thingiverse a 50mm epoxy mixer, needed to add is a 6mm threaded rod to attach the mixer heard to a drill of some sort.

thingiverse

free

Celica 52mm Gauge Pods by tlewis93

...a ra24 celica. it has a threaded hole to tighten each gauge into place, they will accept any type of 6mm x 1.0 thread pitch bolt.

thingiverse

free

Nut block for 8mm threaded rod

...ore than 8mm long. the threaded insert version uses three m365 threaded inserts. they are 6mm long with an outer diameter of 5mm.

thingiverse

free

Hutablagenclip VW Scirocco 2 MK2 Clip Trunk parcel shelf by Christian_Scirocco2

... stifts. the 6mm version works very well. please comment if you print it how it fit. for 6mm version, do a m5 thread in the hole.

thingiverse

free

FLSUN Cube Spool Holder Extension by bro_dk

...6x50mm bolt is required as well as the tool for creating the 6mm thread in the original spool holder and optionally a 6mm washer.

thingiverse

free

M3 Spacers by Adikss

...m3 spacers by adikss thingiverse m3 spacers without thread in different heights: 4mm 5mm 6mm 8mm 10mm 12mm 14mm 16mm 20mm

thingiverse

free

BROKEN HINGE HOLDER D16H1 by bobis

...ge holder d16h1 by bobis thingiverse holder for broken notebook hinge model acer d16h1. make connection using threaded rods 6mm.

thingiverse

free

Super Simple Printrbot Simple Z Axis Coupling by CRJ

...super simple printrbot simple z axis coupling by crj thingiverse 16mm od 5mm stepper shaft insert 6mm threaded rod insert

thingiverse

free

Prusa i3 Z-Axis support brackets by Tech2C

... y-axis threaded rods.https://www.youtube.com/watch?v=wljzwys8nuy added 6mm versions for smaller threaded rod support of 5-6mm.

thingiverse

free

Robo3D R1 PTFE Filament Tube Interface by RogueTrader

...topper for ptfe (4mm teflon tube) push fitting (6mm threads ...

thingiverse

free

6mm bolt by SarahPaulson

... originally came with a terribly short bolt that wouldn't reach and the fan head would not stay on so here's my easy fix!

thingiverse

free

Filament Roll Centering - Zentrierung für Filament Rolle by RICHARDREINISCH

...ner diameter of 39mm or 57mm. gewindestange-durchmesser 6mm fã¼r filament rolle mit einem innen-durchmesser von 39mm oder 57mm.

thingiverse

free

CNC Clamp by jb_cnc

...c thingiverse universal clamp to fix the workpiece. origin (metric) is: 70mm x 30mm x 6mm drill hole to size and tap a m6 thread

thingiverse

free

M6 Nut Caps / Covers by Gunslinger59

...thingiverse m6 nut caps for the end of 6mm threaded rod or for inline. includes coverage for optional washer. print upside down.

thingiverse

free

Small Vise by leden

...giverse small vise, need a 6x80mm screw and 2 6mm nuts. hold the second nuts (the one inside the slider) with thread locker glue

thingiverse

free

6mm Round Link connector, Cylinder Rod End by Technoferret

...end to prevent the rod going too far through and also it helps adjust the length. i have uploaded another picture of this. cheers

thingiverse

free

6mm, 1/4" 2-Axis Block by spingoogL

... with threaded rod. bottom is flat for ease of printing. 3-axis version can be found at http://www.thingiverse.com/thing:1773626.

thingiverse

free

Replacement Cap - Crosman pelletgun oil tube by jaehdawg

... for other tubes of similar size. internal height: 15mm internal thread width: 6mm internal thread height: 5mm made with freecad.

thingiverse

free

Lack Enclosure threaded grommet by Khcarver1

...feed the filament from the top down. has 6mm threads to connect ptfe tube fittings. please let me know...

thingiverse

free

CNC_Y_Axis_Leadscrew_Mount_M6 by jjames007

...s thing to get rid of backlash on the y-axis carriage of my home built cnc. this thing is made for 6mm threaded rod as leadscrew.

thingiverse

free

Melzi clip 6mm by alexgibson

...attaches a reprap melzi controller to an m6 threaded rod, and is a friction fit. print 2 without support, it should just clip on.

thingiverse

free

608 Bearing Block - 6mm, 1/4" by spingoogL

... 1/4" by spingoogl thingiverse this block is intended to fit in a threaded rod frame built out of 3-axis and 2-axis blocks.

thingiverse

free

5 Inch Diameter Hand Wheel 6mm Bore by WTF_Racing

...here is a hole in the hub that can be tapped for a 6-32 screw to attach it to a shaft. i had to shorten a tap to thread the hole.

thingiverse

free

6mm, 1/4" 2-Axis Dual Block - 20mm by spingoogL

...g block and nema 17 that have 20mm spacing holes.http://www.thingiverse.com/thing:1789405http://www.thingiverse.com/thing:1789415

thingiverse

free

6mm Improved X ends for Prusa with clamped rods by beekeeper

...his with switching to flexible vinyl (or vulcanized rubber) z-axis motor couplers and your part quality immediately jumps higher.

thingiverse

free

Messbuchsenfassung by makibox850

...unting of metal sockets for banana plugs onto panels. the banana sockets have 3.6mm holes, 7mm collar on the opening, 6mm thread.

thingiverse

free

Ipod Mini Tripd Stand for video recording by Jmlove

...mounting of ipad mini/tablets. 6mm attachment ipod screw. no threads in 3dprint, the screws threads the 3dprint. next version,...

thingiverse

free

Improved Compact Bowden Extruder, direct drive 1.75mm (6mm fittings) by Coffea

...ow for tapping (recommended). idler adjusted to apply more pressure / work with undersized filaments and to allow easier release.

thingiverse

free

6mm Three Jaw Chuck Adapter by 85iroc305

...y adapter. i used an m3 set screw and threaded insert to lock the motor shaft in place. https://www.thingiverse.com/thing:2670620

thingiverse

free

Universal Spool Holder by angeloitalyboy92

...ttern und geweindestange easy to build spool holder. 2x ball bearing 19x6mm; 6mm hole 2x big washer pair of nuts and threaded rod

thingiverse

free

Petrol Can Cap by lynxpilot

...too many, so i designed my own. check the threads 3 revolutions 6mm section size 42mm...

thingiverse

free

Spinning Top With Screw In Tip by antennatree

...p with screw in tip. screw part is 6mm with default thread type in fusion 360 (6h?). screwing the tip in takes a bit of pressure.

thingiverse

free

Drawer / Cabinet Knob by winnietabz

...style knob that uses a nut / bolt to your requirements. (6mm thread diameter / 9mm bolt head diameter) enjoy, thanks for looking.

thingiverse

free

Stupid Simple Nozzle Holder by Iakouben

...t for my p3steel, but it should fit any machine that has a 3mm frame. happy printing. edits 8/9/2016 - added a 6mm frame option

thingiverse

free

Nema 17 Block - 6mm, 1/4" - 20mm by spingoogL

...www.thingiverse.com/thing:1789405. i've trimmed the height of the block to allow more clearance for the standard motor shaft.

thingiverse

free

Spool Holder by gkssjovi

...d printer requrement: 2 bearings : model 6204 - 2rs threaded rod ( 6mm ) printing settings: nozzle size 0.4mm layer height: 0.2mm

thingiverse

free

BB Bearing Block-6mm, 1/4"-1/4"Bore-20mm by spingoogL

...y, will act as a retainer for the inner race. mounting holes are spaced 20mm apart. dimension drawing to come in the near future.

thingiverse

free

MK8 Nozzle Box by pclapp19

...needles, etc i did have to clean up the threads with a 6mm tap i also added a unthreaded...

thingiverse

free

Feeding Thread Holder For Sewing Machine by ruben02

...eight of the thread holder using combinations of tubes and joiners. you can also use 6mm aluminum tubes instead of printing them.

thingiverse

free

Honda battery clamp by moonants

...mp to hold the battery on my honda crv the hooks get screwed onto the end of 6mm threaded bar, and the knob is glued onto the nut

thingiverse

free

Spool holder by Doogs61

...fit most spools with center hole 28mm up to 70mm and 100mm wide takes 2 626zz bearings a chunk of 6mm threaded rod and a few nuts

thingiverse

free

Gardena Garden Microdrip Irrigation System Adapter 4x by Consti3D

...hingiverse adapts on to a 3/4 inch thread. provides 4 x 6mm micro drip outlets. improved version with a larger water throughput.

thingiverse

free

Sunhokey prusa i3 (6mm acrylic) z-axis fix to frame by san_dro

...ball bearings and hooks both threaded and smooth rods to the frame. edit: 22/08/2017 added v2 for 180mm z height and bowden mount

thingiverse

free

usb microscope focus stack by ekaggrat

... one is a bit tighter than the other. you need m2.5 x 6mm x 5 thread inserts to assemble this also m2.5 x 6mm countersink screws.

thingiverse

free

Guitar String Winder by TBRIshtar

...printing (35mins for me). vitamins: 1x woodscrew; min: 3mm threads 15mm long. max: 6mm threads, 28mm long you can...

thingiverse

free

Ceiling lamp rail mount replacement by bessertommel

...nt for a lamp part that broke because of its age. rail distance 30 mm rail diameter 6mm distance to ceiling abaout 65mm thread m8

thingiverse

free

Shutter hook

...utters you will also need a bolt and the respective nut for each individual piece the bolt has a 10mm head and a 6mm threaded rod

thingiverse

free

Parkside drill right angle holder by parek

... material 6mm rods with thread in the end. it's screeved in the bottom holder. 2x 8mm screws 1x 6mm screw with washer and nut

thingiverse

free

IMA-GO mini 3D Printer by gunawansy

... 8mm x 250mm x 2 y axis 4 8mm x 159mm x 1 x support 5mm threaded rods 1 5mm x 209mm x 2 z motor belt x: 60cm belt y: 52cm

thingiverse

free

YANSB (Yet Another Nozzle Storage Box)

...the size /number of the coupler spots the 10mm threads i bumped to 10.1mm, as 10mm was too tight....

thingiverse

free

power transfer coupler v6 by nottmgage

... coupler from 6mm motor shaft to 8mm threaded rod specifically meant for z axis attachment holes fit bolts up to 5mm in diameter.

thingiverse

free

Simple Nozzle Holder

...6mm nozzles. the dimensions are 40x60x17.5mm layer height: 0.16mm nozzle: 0.4mm enable ironing and hide seams for better results.

thingiverse

free

Mikrotik CRS125-24G-1S-2HnD-IN Wall mount by jirkasuska

...n generated by https://www.thingiverse.com/thing:2412397 . holes are prepared for countersunk screw with 12mm head and 6mm thread

thingiverse

free

Double-threaded bolt and nut M22 (Reinforced) for ANET E12/E16 Printer Spool Holder.

...tendency to break at thread. wall thickness increased at threads and reinforcements added. choose either the vertical or horizontal...

thingiverse

free

M12 12mm Lens holder for Raspberry Pi camera board by mariuschirita

...screws. if you printer is able to make small threads , you can try the threaded file. free to...

thingiverse

free

Prusa i3 spool holder by mahdikhashan

...; parts and 10mm threaded rod for filament holding. use two cable tie to fasten "bottom" part to the plexiglass plate.

thingiverse

free

Spool holder for replicator dual/ Flashforge creator/ ctc by QuiGon

...square. use a hand machine screw threads like here: https://www.aliexpress.com/item/9pc-set-t-type-thread-tap-reamer-hss-3-4-5-6mm-hand-machine-screw-threads32368927031.html?spm=2114.13010608.0.0.x15fls and pneumatic connector pc6-m6 step files and stl files...

thingiverse

free

Mouse Cable Holder by watcha51

...the circle with inkscape put your logo on inkscape and save in svg file import in your 3d software and extrude the svg. and enjoy

thingiverse

free

ImmersionRC Vortex FrSky D4R-II Receiver Case by dinobrasi

... the immersionrc vortex 250 and 285 and the frsky d4r-ii receiver. parts needed: 2x 3mm antenna tubes 4x 6mm course thread screws

thingiverse

free

RotorX Atom standoff by arkngelus

...atom standoff * diameter: 6mm screw hole: 2.04mm screw threads will make its way in the plastic. stl in...

thingiverse

free

Compasso disegno/falegname - Compass drawing tool pencil/caliper by m_gadaleta

...1 barra filettata da 6mm 4 dadi da 6mm (oppure dadi a farfalla) 6 bulloncini (diametro 3mm) 1 grosso chiodo (diametro da 2.5 mm)

thingiverse

free

Part 2 of 4 GP7/9 upper speaker mounting plate by Dstubbs

...u guessed it 3mm x 6mm thread forming screws sorry about the orientation i'm new to 3d drawing just rotate 90 deg on axis x

thingiverse

free

Functional Threaded M6 Screw by markreyna751

... 6mm in diameter and the height can be altered as needed for your project. this design has not been load tested so use it wisely!

thingiverse

free

Picture Frame Corners by King_Bluetooth

...of the materials) of space for backing board, picture and glass. there are mounting wholes in the back to allow for easy hanging.

thingiverse

free

VORON Flex Bowden Extruder (M6 Coupler) by themakeproject

...e original thing here: http://www.thingiverse.com/thing:1413699 and you can buy the m6 ptfe couplers here - http://bit.ly/2pempnc

thingiverse

free

SnapMaker A350 Camera Mount by buckfast_beekeeper

...5001639797152.html you must make m4 thread in camera_mount_1. part 3 can be mounted on the enclosure rails with m4 6mm 2020 nuts.

thingiverse

free

Bosch EV Charger Strain Relief

...mount for a bosch power max ev charger. it threads into the conduit hole for the 220v input. it...

thingiverse

free

Sewing Machine Multi Thread Holder

...thread holder thingiverse i made this to hold cone threads for my embroidery sewing machine, not a fan of...

thingiverse

free

K8200 Spool Quick Release by Battman540

... is a quick print. this was designed for a 6mm threaded rod. let me know if you need a different size. 8mm has now been included.

thingiverse

free

Beer Tap Spanner

...run an m4 tap down it to recut the threads to make an easy fit when inserting the...