thingiverse

free

Martian II Camera mount by kellyullrich

...martian ii camera mount by kellyullrich thingiverse eagle ii camera mount for martian ii quadcopter frame

thingiverse

free

Martian II SJ5000 camera mount

...martian ii sj5000 camera mount thingiverse martian ii sj5000 camera mount

thingiverse

free

Martian II camera holder by filiak182

...martian ii camera holder by filiak182 thingiverse camera holder

thingiverse

free

HS1194 camera plate for Martian II by ruizink

...ink thingiverse this is a camera plate to replace the stock martian ii. designed specifically to fit my foxeer monster (hs1194).

thingiverse

free

Eachine 1000 tvl camera holder_Martian II by filiak182

...eachine 1000 tvl camera holder_martian ii by filiak182 thingiverse 25 degree camera holder

thingiverse

free

Martian II Quadcopter Camera Wedge by Karl33to

...and gitup. angle is 30 degrees. tested in both pla and tpu. using tpu is preferable as it will reduce vibrations in your footage.

thingiverse

free

HD camera Mount for Martian II frame by Musashi_fpv

...eras, but if you slice some pieces, you could get a mount for other types of cameras, like i made with the furibee in the photo.

thingiverse

free

Martian II eachine 1000tvl camera holder by filiak182

...martian ii eachine 1000tvl camera holder by filiak182 thingiverse 25 degree camera holder. eachine 1000tvl

thingiverse

free

Martian II camera protection Witcher style by DidekxD

...martian ii camera protection witcher style by didekxd thingiverse enjoy!

thingiverse

free

Martian II Camera Support by aipiggy

...you're having trouble locking in the camera's angle. will also work with any frame with stand offs spaced 32,0 mm apart.

thingiverse

free

Viewing Lens for Ensign Ful-Vue II Camera by Sebizarro

...ingiverse viewing lens and moulds for ensign ful-vue ii camera. print two parts of the mould and inject clear transparent resin.

thingiverse

free

Eachine 700TVL Camera Mount for Martian II Frame by Forbie

...ifications. the camera is held by friction but if sanding is needed there are screw holes that can be used to bolt the camera in.

thingiverse

free

Security Camera Mount II by Belezeebub

...gle of the eves, the slotted screw mounts allow the mount to be adjusted to any angle you need. print in asa/abs with high infill

thingiverse

free

Martian Reptile to Foxeer Falkor II Camera Mount by Fargo1

...era mount-to-frame (tapped)holes are for m3 screws. camera mounting holes are for m2 screws. filament: 1g print time: 20 minutes

thingiverse

free

Varavon Birdycam II Camera Plate

... additional grip for the mount on the gimbal. some experimentation will likely be needed to get this to fit right on your gimbal.

thingiverse

free

Martian II 220 - Yi Camera Mount by gsimpson2g

...eap velcro strap helps hold the camera in place. video made using the 25 degree mount https://www.youtube.com/watch?v=gesd-r0tveu

thingiverse

free

Foxeer Box Action camera mount for Martian II by Rhymin

...5 & 30 degrees options. this design is still under construction, give it a fly and let me know what you think. happy ripping!

thingiverse

free

Acrobot Bonzai ii Duct, Camera + GoPro Hero Mount

...i ii duct, camera + gopro hero mount thingiverse acrobot bonzai ii carbon frame parts: duct fpv cam mount gopro hero 5,6,7 mount

thingiverse

free

Martian II Foxeer Monster V2 Camera Mount Plate by XxskeletorxX

...n ii frame doesn't come with the correct mounting spacing for the foxeer monster v2 camera. mirror print for the other side!

thingiverse

free

Sony A7 II backpack camera holster

...ated the design, lens orientation can now go in horizontal and vertical! other than that it's pretty similar to the last one.

thingiverse

free

Martian II front bumper and camera guard by Rhaski

...bottom plate, camera and top plate standoff holes which are easily broken off. print in tpu (abs shown for prototype). 50% infill

thingiverse

free

TBS Caipirinha II micro camera mount by DiAleksi

...d moves freely when pushed. cut foam, glue in place. push the camera inside until it clicks and lock it with a screw on the side.

thingiverse

free

Martian II FPV Drone Camera Support by Superflex_Plastic_Fantastic

... want to remix the design to another angle. slice with support at the very bottom horizontal faces only to form base tab inserts.

thingiverse

free

Martian II FPV camera mount by PabloGJ

...good.com/suleve-m3ar5-10pcs-m3-25mm-knurled-standoff-aluminum-alloy-multi-color-p-1171590.html?rmmds=myorder&cur_warehouse=cn

thingiverse

free

Emax Nighthawk 250 II adjustable camera mount for Foxeer XAT600 (HS1177) by philmcglass

...med to fit my emax nighthawk 250 ii frame so made my own which is similar to others around but actually fits my frame and camera.

thingiverse

free

Martian II Runcam Swift 2 camera plate by errno

...m swift 2 camera plate by errno thingiverse original carbon plate doesn't work with runcam swift 2, so here is a solution :)

thingiverse

free

Camera Holder Martian II for Mobius, Run Cam, GoPro Session by smartshapes

... simple cam holder with 25,30 and 35 degree angle for the martian ii sse . it can be used for mobius, run cam, gopro session ect.

thingiverse

free

Martian II gopro 8 camera buzzer mounts by Hundredacreweeds

...ras also a thin 30x30 sheet to put over the fc to keep battery straps from touching stuff hopefully something will be helpfull!!!

thingiverse

free

clamping lever for camera tripod Slik Sprint Mini II

...tation! the other are different in size of the handle but can be used. for some of the other levers you can use it by mirroring.

thingiverse

free

Martian II/Impulse RC Alien Camera Mount for Samsung Gear 360 by Ayo_O

... a 1/4" - 20 unc fastener with a length of 1/2" is required in order to retain a samsung gear 360 camera to this mount.

thingiverse

free

Martian II 2 220/250 GoPro Yi 40° Camera Mount by cuxx

...martian ii 2 220/250 gopro yi 40° camera mount by cuxx thingiverse same as the one for martian i but shorter.

thingiverse

free

Monster Foxeer camera plate for Martian II by SyrexFPV

...ian. it need to advance the camera mount. i've tested it with sketchup and now i can set 45° fpv angle, so i'm speedy ;)

thingiverse

free

Camera Holder Martian II for Xiaomi Yi, older GoPro Heros or similar by smartshapes

...e cam holder with 25,30 and 35 degree angle for the martian ii sse . it can be used for xiaomi yi, older gopro heros or similar .

thingiverse

free

Pinhole Camera Mark II by NoUseForAdventures

...alike 3.0 united states license.permissions beyond the scope of this license may be available at nouseforadventures.blogspot.com.

thingiverse

free

Bottom cam holder for Matian II with mini FPV camera by theevilmelon

...free to ask... i would recommend to heat shrink the cables (like in the picture above) because of the sharp edges on the frame :)

thingiverse

free

xperia 5 ii camera bump (2 versions) by vapgames

...n't sand it. i stuck it using thin double sided tape. i've added 2nd version with more protection and more complex shape.

thingiverse

free

Martian II Camera Tilt Wedge 10/20/30/40 Degree by Velocirotor

...vibration isolating the camera. secure the camera to the tilt using velcro strap found commonly at most home improvement stores.

thingiverse

free

Zephyr II GoPro Hero 2 Camera box by JohnnyFaber

...t flight cams will fit the flight cam side as well. you can drill your own holes for hard mounting or use hot glue etc. enjoy!

thingiverse

free

Swift FPV Camera Support - Martian II 220 (Alien 5 clone) Quadcopter by KellenR

...installation of a runcam swift fpv camera (or similar size) using the adjustable, sliding back cover. (maximum upward angle ~40°)

thingiverse

free

Martian II SJ4000 camera mount by BavarianBarbarian

...20°" which also can be found on thingiverse. i designed the baseplate new, the rectangular box is taken completely from him!

thingiverse

free

Martian II - Eachine FPV Camera Mount - 25.35 degrees

...ew fpv racing build, so i thought i'd share for everyone else. i used a brim cause the skirt allowed for warping on my cr-10.

thingiverse

free

Camera Mount Mark II for Felix 3.0 by dwmartin805

...he iphone 4s using the mk i mount. the need for better control and position of the camera is evident.http://youtu.be/-lnjxvnxqsw

thingiverse

free

Armattan Morphite Top Plate (HS1177 Camera, D4R-II or spektrum sat, Aomway 200mw Tx) by linklemming

...pared to my other designs, d4r-ii mount moved back to allow a hs1177 to be mounted to the bottom plate using its included bracket

thingiverse

free

GANANT-LVPEI Slit Lamp Camera Adapter (Samsung Galaxy Note II + CZ) by ganant

... the samsung galaxy note ii on the carl zeiss slit lamp. makers - ganesh babu & dr.anthony vipin das l v prasad eye institute

thingiverse

free

Martian II RX255 FPV Runcam Camera Mounts by EckeVolta

...was too exposed so i made another with it setback. depending on the field of view the frame maybe in view with the setback mount.

thingiverse

free

Camera TriPod Mount For Samsung Galaxy Nexus/Note/S II Car Dock by EnderFM

...ill need a 1/4-20 nut to secure the mount. edit: i have not verified if this would work with the gsm version of the sgnexus dock.

thingiverse

free

GANANT-LVPEI Slit Lamp Camera Adapter (Samsung Galaxy Note II + HS BM900) by ganant

...msung galaxy note ii on the haag-streit bm900 slit lamp. makers - ganesh babu & dr.anthony vipin das l v prasad eye institute

thingiverse

free

Runcam Split Camera Mount for Martian II or Alien Frame by danarrib

...the heavy version should weight about 5g each side. note: it also will work for: runcam swift mini runcam split v2 caddx turbo s1

thingiverse

free

Zephyr II Modular Camera mount by MiguelAlvarez

...ome landings. feel free to leave feedback if you use this mount so i can take improvements into consideration for future designs.

thingiverse

free

eachine 1000tvl holder for martian II by captainju

...usage). both holes can be drilled for fixing the camera ...

thingiverse

free

Martian II Antenna Holder by Blomdoft

...of a series with flight control holder and gopro camera ...

thingiverse

free

Martian II 6" GoPro Session 25° Mount by donsknr

...mount by donsknr thingiverse martian ii 6" gopro session camera ...

thingiverse

free

Martian II RunCam Swift Back by Dogatech

...runcam swift back by dogatech thingiverse this is the camera back for the martian ii. i have a runcam...

thingiverse

free

MX2 EPP + SWIFT II PAN&TILT

...ii pan&tilt thingiverse simple pan&tilt mechanism for swift ii camera mounted over a mx2 epp...

thingiverse

free

Splitzer Rocket Mk II by VincentD

...rocket version ii. can be modified to match any camera lens. do what you want with...

thingiverse

free

Martian II 20 degree camera mount + Antenna bay-Frsky R-XSR tray combo by Jaytjuh575

...mpensate for my printer- make sure to show my your quad builds in the "i made one section!" i hope you'll enjoy it!

thingiverse

free

RunCam Swift mini mount for 25mm Martian II / Alien by Motorpixiegimbals

...top plate might be necessary depending on the desired camera angle. replaces the stock camera...

thingiverse

free

Mijia 4k Martian II mount

...30 degree mount martian ii for the mijia 4k camera you can either glue both parts with epoxy ,...

thingiverse

free

Yi II 4k Protective Enclosure - 2 versions available by Olimatou

...2 versions available by olimatou thingiverse yi ii 4k camera protective enclosure in 2 versions. one for normal use...

thingiverse

free

Netbook Tough Tray II tripod adaptor by gordo

...ii (netbook mount) to be attached to a standard camera tripod. i built it for netbook used when flying...

thingiverse

free

SMZ-U Camera Port Adapter - Micro Four Thirds (M43)

...hstahl, it is pretty tight on the e-m10 mark ii but with a little force, the pla gives away...

thingiverse

free

GoPro mount for Zephur II by kcmj

...camera if you do not use the small fpv camera thanks...

thingiverse

free

Batterycontainer LP-E6 and LP-E6N by kbloch

...r, 60d, 60da, 70d, 6d, and 6d mark ii camera i printed with 0.30 layerheight and transparent pla. there...

thingiverse

free

MOBOTIX c26 mount ver. II by suge1405

...c26 mount ver. ii by suge1405 thingiverse mobotix c26 camera mount, 2 parts top for wall mounting and second...

thingiverse

free

Martin II Runcam Swift Adjustable Mount by Karl33to

...runcam swift adjustable mount by karl33to thingiverse simple standoff camera mount to suit the runcam swift 2 and the...

thingiverse

free

Martian 2 Action Camera Mount by Furcalor

...gopro / sj4000 action camera mount https://www.thingiverse.com/thing:470945 and martian ii quadcopter camera wedge...

thingiverse

free

HS1190 (or 1177) FPV cam mount for Martian II by dwl1110

...ii by dwl1110 thingiverse a remix to move the camera back to behind the front standoffs for extra...

thingiverse

free

canon 5d mark ii optical opturator by DONCANELO

...doncanelo thingiverse just my design of a insta360 go camera mount for the diatone tinawhoop. super...

thingiverse

free

Cam holder for miniquad FPV by Funfly

...for miniquad fpv by funfly thingiverse simple sj cam camera holder for miniquad fpv. printed from abs. design for...

thingiverse

free

Camera Mount Thumb Screw by lawrenceinflorida

...i made a camera mount for my microscope and ii needed a short 3/8-16 thumb screw. i've included the...

thingiverse

free

67mm filter to Canon G5X Mark II adapter by Collis

...adapter i can. print in black!! attach with the camera stand...

thingiverse

free

Martian II HS1177 Mount (25 Degree) by carbrf

...carbrf thingiverse low profile 30mm mount for runcam swift/hs1177. camera clips into a 25 degree...

thingiverse

free

Martian II Quad 20 degree GoPro Session Mount by jimflint80

...for adding some foam or velcro damping under the camera and you will need a 10mm wide velcro...

thingiverse

free

Martian II Quad 25 degree GoPro Session Mount by jimflint80

...for adding some foam or velcro damping under the camera and you will need a 10mm wide velcro...

thingiverse

free

Martian II Quad 30 degree GoPro Session Mount by jimflint80

...for adding some foam or velcro damping under the camera and you will need a 10mm wide velcro...

thingiverse

free

Yi camera 35° holder remix by 3DJakob

...35 degree yi camera mount to fit the martian ii frame screws. also added a stopping plate for the...

thingiverse

free

SLIcK Stabilizer by otterpopjunkie

...this adapter sits between the tripod mount and the camera and prevents twisting. this allows you to shoot portrait...

thingiverse

free

Splitzer Rocket Mk I by VincentD

...can be modified to fit any lens and any camera you want, just adapt the openscad script. enjoy. need...

thingiverse

free

FPV camera mount XAT600M HS1177 by redrobrc

...a flexible filament. good camera http://www.banggood.com/orange-foxeer-hs1177-sony-600tvl-ccd-2_8mm-ir-mini-fpv-camera-5-17v-with-bracket-p-1052455.html?p=la1820677103201407rs cheap camera clone http://www.banggood.com/600tvl-2_8mm-lens-13-sony-super-had-iiccd-camera-for-fpv-racing-drone-palntsc-p-1086784.html?p=la1820677103201407rs ...

thingiverse

free

Mode 2 Shredder - GoPro Hero Mount by mode2fpv

...v1.5 and shredder ii that removes the carbon fiber camera cage. gopro hero camera mount for the mode 2...

thingiverse

free

TPU martian II xiaomi YI cam mount by IllusionFPV

...20°, 25° and 30°. designed to fit lens protector https://www.banggood.com/it/glass-uv-lens-protective-cover-for-xiaomi-yi-action-cameraxiaomi-yi-accessories-p-1009249.html?p=7v091232423802015123 ...

thingiverse

free

Martian II GoPro session mount by pansekta

...that fits my martian ii. sooo much space for camera strap - most convenient mount i have ever used....

thingiverse

free

Runcam Split / Mini holder for A-max Standar-II 220mm by Speeddrones

...speeddrones thingiverse i found that the a-max standar-ii 220 camera holder does not fit well with hs1177 or runcam...

thingiverse

free

Martian II GoPro Holder by Blomdoft

...an openscad-file, so you can adjust it to your camera size. this is kind of a "remix" as i...

thingiverse

free

RasPi Cam Holder for Rebel II Printer by kicune

...thingiverse here is my attempt to create raspberry pi camera holder that would fit alu profiles of rebel ii...

thingiverse

free

Sony alpha a7 LCD screen Hood & shade (a7 II, III, IV, R, S)

...& shade (a7 ii, iii, iv, r, s) thingiverse camera screen hood(shade) is a simple tool that allows you...

thingiverse

free

Martian Camera Guard by JohnWaly

...the lens on my runcam swift. fits my martian ii frame. may fit others. added a v2 that has...

thingiverse

free

Martian II Frame Mods by dr4cul4

...post all my mods to martian frame (except recording camera mount). all of my parts are printed in tpu,...

thingiverse

free

Martian II Gopro Session Mount by pandatautau

...thingiverse this design gives me more confidence with the camera not falling off during very fast maneuvers with the...

thingiverse

free

CCD Camera Mount for 250 Size QuadCopters by megabyte

...the argonaut aq250 and my sony 600tvl super had ii from securitycamera2000.com. it attaches to the frame with 4...

thingiverse

free

Plate tripod HAMA PROFIL DUO II by Josuez

...original. you need also a metal screw for the camera and a aprox 2mm thick rubber piece. i put...

thingiverse

free

Campark Action Camera Case by JonnyJumboLahn

...action camera case by jonnyjumbolahn thingiverse a campark xtreme ii uhd 4k action camera case which is mounting compatible...

thingiverse

free

Martian II 220 Support batterie et RunCam 3s

...en fillament souple pour fixer une lipo et une camera runcam 3s sur un quad martian 2...

thingiverse

free

Martian II Runcam Eagle 2 holder - 30 degrees by chmod755

...30 degrees by chmod755 thingiverse this is a fpv camera mount that i made for the runcam eagle 2...

thingiverse

free

All Sky Camera (housing, bracket and gears) by RoboRob

...cctv yv2.2x1.4a-2 cs mount fish-eye (1.4-3.1mm) f1.4 lens. see https://stargazerslounge.com/topic/245660-ginas-diy-all-sky-camera-mark3-with-qhy5l-iic/?page=1 (english) and http://www.astroforum.nl/showthread.php/161635-kleuren-allskycam?highlight=allskycam (dutch) for more details on this...

thingiverse

free

360 FPV Kopter Frame Parts by MRSmith37

...360 kopter - that is invisble for the 360 camera i used a martian ii frame as base and...

thingiverse

free

2.8mm Lens Mini FPV Drone Camera Mount by Superflex_Plastic_Fantastic

...variant seen here. https://youtu.be/b91oddptnng fit tested on a martian ii frame. see pics for camera...

thingiverse

free

Skytracker guide

...skytracker guide thingiverse a mount to allow use of camera directly on skytracker mount - useful to check polar...

thingiverse

free

RailCore II 300ZL Logitech 920c WebCam Mount by sosa9999

...print twice for left and right sides. unknown if camera needs to be moved to...

thingiverse

free

Olympus E-M1 II grip replacement

...outer side. this is necessary as it allows the camera grip to fit the camera very, very securely. update:...

thingiverse

free

VirtualFrame - Colibrì 5" --> Yi camera mount

...it at this linkhttps://www.thingiverse.com/download:6605239 project derived from: tpu martian ii xiaomi yi cam mount by illusionfpv link:...

thingiverse

free

Tiltable Flight camera caddy for mini quad by LV-426

...mini camera like surveilzone hs1177 (pz0420m) sony super had ii ultra mini. use an output from your receiver to...

thingiverse

free

MARTIAN II 255 QUADCOPTER FPV CAM MOUNT by giek2000

...fpv cam mount by giek2000 thingiverse this is a camera mount for fpv 'cube' cams with a 14.5mm round...

thingiverse

free

martian ii runcam 2 mount by nukemurat

...i am new in fpv and i use my camera with 20 degree...

thingiverse

free

Nikon DK-19 to Z5 eyepiece adapter by gufo2k20

...but i think can also be used on z6/z7/ii camera models. need some basic assembly and some glue. first...

thingiverse

free

RunCam Swift 2 mount for 35mm stand-offs // Martian II / Alien by silvanjoos

...top plate might be necessary depending on the desired camera angle. - original text, changed height to 35mm and...

thingiverse

free

My All Sky Camera

...housings but is designed to fit my camera (qhy 5-iil m) and cctv dome which is 2.9"...

thingiverse

free

Olympus OMD E-M10 mark II grip by rkovac12

...is based on the design of scott garriott - https://grabcad.com/library/e-m5-mkii-diy-cameragrip-1 ...

thingiverse

free

Flashforge Guider IIs Door GoPro Mount V2 by FlynnIndustries

...angle, allows for better quality recording, and keeps the camera out of the printer's operating space. borrow the nut...

thingiverse

free

Motorised Gimbal by Darren3651

...size: elegoo saturn (not suitable for mars size). strong camera gimbal suitable for being motorised. designed to hold pro...

thingiverse

free

Eken H9 30 degree Martian II mount by 3DJakob

...this is a mount for the eken h9/h9r action camera it has a 30 degree tilt and fit the...

thingiverse

free

Flashforge Guider IIS lens hood by Xamph

...a minor amount of filing to slip over the camera i've included a pic showing the lack of flare...

thingiverse

free

ZMR160 Kit by LuluTchab

...eachine 1000tvl. 2 pieces (top, bottom) to hold the camera the angle is 5° only because we already have...

thingiverse

free

Runcam Split Martian 2 Mount (No props in the view) by Maxeed

...the props in the recording, this one leaves the camera a bit exposed but no props in the view!...

thingiverse

free

Martian II 220 GoPro Style Mount by gsimpson2g

...a mount that will allow you to attach any camera using the standard gopro attachment system. i use it...

thingiverse

free

RUNCAM Hybrid - Adapter to Standard Size

...standard size thingiverse there is an adapter to standard-size camera for runcam hybrid: 28mm width, the gap for camera...

thingiverse

free

Canon Battery Cover by cgmason1986

...lp-e6 battery that comes standard on the following canon camera: eos 6d eos 60d eos 60da eos 70d eos...

thingiverse

free

Martian II Creations by Mickkn

...: new version that actually fits with the fpv camera angle martii_32deg_v_1_0 : new version that actually fits with...

thingiverse

free

Martian II mount for Runcam 3 / Gopro 30 degree by Peck

...recreate the design, and lower it. this lowers the camera about 1cm. 30 degree...

thingiverse

free

Ritewing Zephyr II GoPro Hero 3+ nose mount by Bungraman

...for zephyr, only zephyr ii. removable lid for accessing camera slot at rear for video feed to vtx/osd. hole...