359 ula 3d models found
Download or buy, then render or print from the shops or marketplaces.
3D Models below are suitable not only for printing but also for any
computer graphics like CG, VFX, Animation, or even CAD. You can print these 3d models on
your favorite 3d printer or render them with your preferred render engine.
Please note that the 3D model database is only a Search Engine. You should
visit the original websites. Most of the models can be easily imported and rendered
with Autodesk 3ds Max, Maya, Blender, C4D, and Sketchup. Check for online
3d model conversions tools for your file format.
Shown 2 of
3 pages
grabcad
free
ULA Internal Support Bracket
...bf applied uniformly in the negative z direction with the mounting holes fixed (see ula spt brkt-simulation xpress study-1.docx).
grabcad
free
ULA rocket bracket MPv2
...ula rocket bracket mpv2
grabcad
mass : 0.11 lb
volume : 2.27in^3
grabcad
free
ULA rocket bracket MPv1
...ula rocket bracket mpv1
grabcad
mass :0.147 lb
volume : 3.046 in^3
grabcad
free
ULA Support Bracket VB09
...ula support bracket vb09
grabcad
volume=2.0029 cu.in
mass=0.097 lb
grabcad
free
ULA Support Bracket VB08
...ula support bracket vb08
grabcad
volume = 1.8671 cu.in.
mass =0.0904 lb
grabcad
free
ULA Support Bracket VB07
...ula support bracket vb07
grabcad
volume = 2.64 cu.in.
mass =0.1278 lb
grabcad
free
ULA Support Bracket VB06
...ula support bracket vb06
grabcad
volume = 4.6121 cu.in.
mass =0.2232 lb
grabcad
free
ULA BRACKET - PAYLOAD FAIRING
...derings of part and part with shell, pallet, hardware, and tool interfaces. description of part, mass, volume, stress pdf's.
grabcad
free
ULA BRACKET
...ut 90.4%.
density = 0.04 pounds per cubic inch
mass = 0.07 pounds
volume = 1.94 cubic inches
surface area = 20.38 square inches
grabcad
free
ULA RHC 1
... this great challenge:-)
https://grabcad.com/challenges
- softwares used:
...inspire
...ansysspaceclaim
...simlabmechanicalpro
grabcad
free
v0.1 - 0.043 lb bracket - ULA challenge
...1 - 0.043 lb bracket - ula challenge
grabcad
mass - 0.043 lb / 19.5 g
volume - 0.89 cubic inches
ula bracket made of ultem 9085
cg_trader
free
Planer for Ula 70
...different options and perspectives. click on the tabs to go through the proposal larvik ula planer orange building exterior other
grabcad
free
ULA BRACKET LIGHT3.0
...abcad
last attempt - optimization of 2.0
mass=0.0396kg=0.087lb
max stress=4092psi.
there is margin to reduce weight but no time.
grabcad
free
ULA envelope AD01 - by Adriano Barissa
...ula envelope ad01 - by adriano barissa
grabcad
mass: 0,100 lbs
grabcad
free
ULA envelope AD10 - by Adriano Barissa
...ula envelope ad10 - by adriano barissa
grabcad
mass: 0,06 lbs
grabcad
free
ULA envelope AD09 - by Adriano Barissa
...ula envelope ad09 - by adriano barissa
grabcad
mass: 0,07 lbs
grabcad
free
ULA envelope AD08 - by Adriano Barissa
...ula envelope ad08 - by adriano barissa
grabcad
mass : 0,09 lbs
grabcad
free
ULA envelope AD004-by Adriano Barissa
...ula envelope ad004-by adriano barissa
grabcad
mass : 0,04 lbs
grabcad
free
ULA Bracket
...in the force direction
excellent application for honeycomb strength-to-weight ratio
mass: 0.077 pounds
volume: 1.58 cubic inches
grabcad
free
ULA BRACKET FINAL
...ula bracket final
grabcad
mass : 0,086 lbmass
volume : 1,776 in^3
area : 118,157 in^2
stress (max) : 71,2 ksi (71200 psi)
grabcad
free
ULA BRACKET 4
...ula bracket 4
grabcad
mass : 0,090 lbmass
volume : 1,866 in^3
area : 119,850 in^2
stress (max) : 31,74 ksi (31740 psi)
grabcad
free
ULA BRACKET 3
...ula bracket 3
grabcad
mass : 0,1 lbmass
volume : 2,248 in^3
area : 99,712 in^2
stress (max) : 7,293 ksi (7293 psi)
grabcad
free
ULA BRACKET 1
...ula bracket 1
grabcad
mass : 0,1 lbmass
volume : 2,152 in^3
area : 107,529 in^2
stress (max) : 15,94 ksi (15940 psi)
grabcad
free
ULA BRACKET 2
...ula bracket 2
grabcad
mass : 0,097 lbmass
volume : 2,005 in^3
area : 97,054 in^2
stress (max) : 10,56 ksi (10560 psi)
grabcad
free
ULA Bracket 4
...ce therefore it will
withstand with the load.
the deformation is low. and design to adapt with the additive manufacturing methods
cg_trader
$7
Table ula round coffee table ula002 designed
...table ula round coffee table ula002 designed
cg trader
table ula round coffee table ula002 designed by giannella ventura in 2005
cg_trader
$7
Table ula round coffee table ula001 designed
...table ula round coffee table ula001 designed
cg trader
table ula round coffee table ula001 designed by giannella ventura in 2005
grabcad
free
ULA Rocket Hardware Bracket
...amic results.
ansys’s total deformation result gives idea about style of new bracket’s edges.
mass = 0.097 lb
volume= 2,006in3
grabcad
free
ULA Support Bracket VB03
...ula support bracket vb03
grabcad
this is my 3rd entry for this challenge.
volume = 2.1808 in³
mass = 0.0827 lb
grabcad
free
ULA GrabCad Challenge
...d
first time doing this. don't know much but this is my try.
tried to make the material as accurate as possible in inventor.
grabcad
free
ULA BRACKET - LIGHT
...ting from the original shape the bracket has been lightened by fea simulations.
mass: 0.049kg =0.108lb
volume=37212mm3=2.27inch3
grabcad
free
3-2-1 Liftoff! ULA Rocket Hardware Challenge
...3-2-1 liftoff! ula rocket hardware challenge
grabcad
3-2-1 liftoff! ula rocket hardware challenge
grabcad
free
ULA ROCKET BRACKET CHALLENGE _ MAZHOUD KHOUBEIB -TUNISIA
...ket challenge _ mazhoud khoubeib -tunisia
grabcad
ula rocket bracket
5 layer sandwich structure
i didn't upload it because
grabcad
free
ULA Rocket Hardware
...la rocket hardware
grabcad
2x hole pattern "e": tap and fit wire thread inserts
material: ultem 9085
weight: 27.5 gram
grabcad
free
ULA Rocket Clamp 1
...ula rocket clamp 1
grabcad
rocket clamp combining weight saving with specific 3d printing design features
grabcad
free
ULA - MK4
...in the 4500psi capped image, there is only a few areas with stress over 4500psi, that could be associated with the fea mesh model
grabcad
free
ULA ROCKET BRACKET SSR
...ula rocket bracket ssr
grabcad
result:
mass : 0.1 lb
volume:0.000311374 m^3
factor of safety : 2.1
grabcad
free
ULA support bracket
...ptimization of bracket in a program for topology optimization called caess protop.
max. sress:30.19mpa
mass:44g
volume:0.34dm^3
grabcad
free
Part for ULA Challenge
...f masses
xc = 0.000000 mm
yc = 6.371845 mm
zc = 31.477206 mm
grabcad
free
ULA Rocket Hardware Challenge
...ula rocket hardware challenge
grabcad
mass = 0.10 pounds
volume = 2.07 cubic inches
surface area = 25.74 square inches
grabcad
free
Ula Robust Bracket
...ifications by reducing stress&weight .max. stress executed on outside of the critical region.
mass 0,079lb
volume 1,641in3
cg_trader
$12
Crate and Barrel Ula Dining Table
...crate and barrel ula dining table
cg trader
l960 x w2100 x h760 mm.
grabcad
free
ULA Rocket Hardware Challenge-1
...ula rocket hardware challenge-1
grabcad
volume: 1.6238534 inch^3
mass: 0.078611 lbm
grabcad
free
ULA Rocket Hardware Challenge-2
...ula rocket hardware challenge-2
grabcad
volume: 1.258 inch^3
mass: 0.061353 lbm
grabcad
free
ULA - ATLAS 001
...
radii of gyration :
rx= 1,313520 in
ry= 1,261872 in
rz= 0,583881 in
have fun & good luck !!!
grabcad
free
ULA BRACKET
...ult works don't get confuse if any errors ;.... suggest me .and i am trying in solid works ....
suggestions are open..
grabcad
free
Design 1.0 ULA Rocket Hardware Challenge
...design 1.0 ula rocket hardware challenge
grabcad
design 1.0
by : rizaldy hakim
grabcad
free
ULA bracket 44.4G
...951 in^3
density: 0.0368498 lb/in^3
weight: 0.0979361 lbf
a file with details of load calculations is available in the downloads.
grabcad
free
ULA bracket 44.2G
...004 in^3
density: 0.0368498 lb/in^3
weight: 0.0975873 lbf
a file with details of load calculations is available in the downloads.
grabcad
free
ULA bracket 45.2G
...936 in^3
density: 0.0368498 lb/in^3
weight: 0.0997717 lbf
a file with details of load calculations is available in the downloads.
grabcad
free
ULA bracket 45.1G
...082 in^3
density: 0.0368498 lb/in^3
weight: 0.0994572 lbf
a file with details of load calculations is available in the downloads.
grabcad
free
ULA bracket 42.4G
...089 in^3
density: 0.0368498 lb/in^3
weight: 0.0935681 lbf
a file with details of load calculations is available in the downloads.
grabcad
free
ULA bracket 40G
...32 in^3
density: 0.0368498 lb/in^3
weight: 0.0897171 lbf
a file with details of load calculations is available in the downloads.
grabcad
free
ULA bracket 44.6G
...158 in^3
density: 0.0368498 lb/in^3
weight: 0.0983804 lbf
a file with details of load calculations is available in the downloads.
grabcad
free
ULA Rocket BRIDGE_V1
...duction : 90.15%
maximum design stress (von mises): 1,521 psi
factor of safety: 2.959
inspired by the structure of the bridge.
grabcad
free
ula create -1
...s 0.9 lbs
volume 2.46 cubich inches
surface area 30.53 square inches
fea analisys
yield strength 9,239
von misses max 12.526.480
grabcad
free
ULA Support Bracket VB01
...
this is my 1st entry for this challenge.
volume = 1.9748 in³
mass = 0.095 lb
no load calculation ( just using autocad software)
grabcad
free
ULA Support Bracket VB02
...
this is my 2nd entry for this challenge.
volume = 2.4605 in³
mass = 0.119 lb
no load calculation ( just using autocad software)
grabcad
free
ULA Support Bracket VB04
...this is my 4th entry for this challenge.
volume = 1.4137 in³
mass = 0.0680 lb
no load calculation ( just using autocad software)
grabcad
free
ULA BRACKET LIGHT 2.0
...
this bracket is a revision of the previous submitted design.
mass=0.0965 lb=43.8g
volume = 32719mm3=1.99inc3
mass stress=4185psi
grabcad
free
ULA FS
...n fusion 360. not expert in t-spline modeling, but so much fun to explore the shape possibility.
mass: 0.1 lb
volume: 2.13 in^3
grabcad
free
ULA BRACKET ORIGINAL
... taken for the calculation are correct. there is someone that could compare the own results with my results?
mass=0.440kg=0.970lb
grabcad
free
ULA Bracket ver-6 (37.21gm)
...(max) = 0.0140 inches
a little twist to make my previous model (ula bracket ver-3 rebuild) yet a bit lighter and less stressful.
grabcad
free
ULA support bracket V9
...timal model for 3d printing, a considerable amount of support material will be required.
mass = 0.095 lb
printing direction : z+
grabcad
free
ULA ROCKET BOATAIL BRACKET
...orms on the days leading up to launch. bracket will remain with vehicle after launch. bracket will be treated with black anodize.
grabcad
free
ULA Bracket Challenge
... challenge. i'm still in doubt with the pattern "d" holes, but i believe i got them correctly. give me your opinion
grabcad
free
ULA Bracket DT-3
...is and predicted max. von mises stress = 3896 psi under ultimate load 600 lbf which applied uniformly in the negative z direction
grabcad
free
ULA Bracket DT-2
...is and predicted max. von mises stress = 4257 psi under ultimate load 600 lbf which applied uniformly in the negative z direction
grabcad
free
ULA Bracket
...applied and also it withstand with some high pressure and load as well also this not very hard to addictive manufacturing methods
grabcad
free
Atlas Bracket for ULA Challenge
...cad
a non-traditional bracket skeletonized for printing.
weight: 0.0996 lbs
volume: 2.057 inches^3
von mises: 4,301psi
fos: 1.1
grabcad
free
ULA Support Bracket VB05-Twin Support
...ula support bracket vb05-twin support
grabcad
this is my 5th entry for this challenge.
volume = 0.8319 in³
mass = 0.04027lb
grabcad
free
ULA Rocket Hardware - Mu3
...h project.
the part was topologically optimized to minimize weight and maximize stiffness, while maintaining a stress constraint.
grabcad
free
ULA Rocket Hardware - Mu5
...h project.
the part was topologically optimized to minimize weight and maximize stiffness, while maintaining a stress constraint.
grabcad
free
ULA Rocket Hardware - Mu4
...h project.
the part was topologically optimized to minimize weight and maximize stiffness, while maintaining a stress constraint.
grabcad
free
ULA Rocket Hardware - Mu1
...h project.
the part was topologically optimized to minimize weight and maximize stiffness, while maintaining a stress constraint.
grabcad
free
ULA rocket hardware - Mu2
...h project.
the part was topologically optimized to minimize weight and maximize stiffness, while maintaining a stress constraint.
grabcad
free
ULA Bracket DT-5
...is and predicted max. von mises stress = 4248 psi under ultimate load 600 lbf which applied uniformly in the negative z direction
grabcad
free
Supplementum - ULA bracket
...pa - 2620.83 psi
simulation videos -
https://www.youtube.com/watch?v=fcm-eu-xna4
https://www.youtube.com/watch?v=rd0xgj3pnqk
grabcad
free
ULA _ ATLAS 07 & 07C
...
radii of gyration :
rx= 1,415592 in
ry= 1,373246 in
rz= 0,562218 in
have fun & good luck !!!
grabcad
free
ULA Bracket Shell/Walls Based Structure
...ula bracket shell/walls based structure
grabcad
topology optimized shell and lattice (walls) structure. final mass 27.7 grams.
grabcad
free
ULA _ ATLAS 06
...
radii of gyration :
rx= 1,530364 in
ry= 1,453501 in
rz= 0,649272 in
have fun & good luck !!!
grabcad
free
ULA _ ATLAS 04
...
radii of gyration :
rx= 1,341775 in
ry= 1,293004 in
rz= 0,579448 in
have fun & good luck !!!
cg_trader
$16
ula island scenes - to build a house on a lake 01
...ula island scenes - to build a house on a lake 01
cg trader
all materials and textures are included with model.
grabcad
free
ULA Bracket - V2
...e to tools
• total weight is slightly more than half design goal.
specifications
total weight 0.0527 lbs
total volume 1.046 in3
grabcad
free
ULA BRACKET BEAM STRUCTURE
...max. stress : 4,136.085 psi
max. displacement : 0.0159 inch
safety of factor :1.7
mass : 0.09251 lb
volume : 1.92734 cubic inches
grabcad
free
ULA M-ezing Bracket
....55 / 20.07 * 100%) = 92.277%
fea analisys:
max design stress (von mises): 1,984 psi
this bracket is inspired by the letter m.
grabcad
free
ULA Part
...sign if u find any problem and if u wan suggest something or u have any doubt pls do let me know by commenting below.
thank u all
grabcad
free
ULA Bracket Honeycomb V1
...or the envelope.
take a look also here:
http://www.3dsasucatalin.16mb.com/engineering/cad/25-structural/56-ula-bracket-honeycomb
grabcad
free
ULA Bracket Design 002CP
...alysis and predicted max. von misses stress = 3581 psi under ultimate load 600 lbf which applied uniformly as shown in the image.
grabcad
free
ULA Bracket Design 001CP
...alysis and predicted max. von misses stress = 4343 psi under ultimate load 600 lbf which applied uniformly as shown in the image.
grabcad
free
ULA Bracket New Design
...r the creation was subjected to a static study.the part was subjected to a pressure of 600 lbs.
this piece weight is 0.44 pounds.
grabcad
free
Bracket v2 - ULA Atlas V Rocket
...ity with minimal post-processing.
mass: 0,039kg/0.09lb
volume: 28.41cm^3/1,73in^3
manufacturing method: fdm
material: ultem 9085
grabcad
free
ULA BRACKET V_01
...design stress (von mises): 1,547 psi
factor of safety: 3.144
applied force: 600 lbf total (2 face)
applied fixture: 4x bolt holes
grabcad
free
v1 - 0.036 lb bracket - ULA challenge
...036 lb bracket - ula challenge
grabcad
mass - 0.036 lb / 16.317 grams
volume - 0.7431 in^3 / 12.177 cm^3
inspired by bridges :)
grabcad
free
ULA JHU TOPOPT
...t consist of two halves that are mirror image of one another. the bracket's mass is 0.086 lbm and total volume is 2.358 in^3.
grabcad
free
Bracket for ULA Rocket Hardware Challenge
...sw files (with calculations) and images included.
mass: 0,08 lbf
max.displacement: 0,02869 inch
max. von mises stress: 10,2 ksi
grabcad
free
ULA Rocket Hardware Challenge
...few properties of the required/wanted material since i am still learning and only a student. and i just participated to learn. :)
grabcad
free
ULA Bracket LTG
...ded as well.
the same part has been uploaded in two different formatted files just in case any of them didn't work properly.
grabcad
free
ULA Bracket Shell/Lattice Structure Model
...tice structure model
grabcad
full 3d solid topology optimized of shell and lattice structure. final mass 0,0575 lb
(26.1 grams).
grabcad
free
Bracket v5 - ULA Atlas V Rocket
... overall geometry was simplified.
mass: 0,033kg/0.07lb
volume: 24,18cm^3/1,48in^3
manufacturing method: fdm
material: ultem 9085
grabcad
free
ULA BRACKET HENDAR V 2
...ad
mass product 0.0848 lbf
volume 2.3 cubic inches
surface area 21.137 square inches
max stress 1.7891 psi
best regard
hendar
grabcad
free
Kurniawan ULA Rocket Bracket V 1.0
....
load distributed to the bolt hole through 3 ribs to get maximum strength and minimum weight.
best regards,
m arie kurniawan
grabcad
free
ULA Bracket Honeycomb V2
...h many colonies.
take a look also here:
http://www.3dsasucatalin.16mb.com/engineering/cad/25-structural/56-ula-bracket-honeycomb
cg_trader
$18
Ula Dining Table Crate and Barrel
...al the black scandinavian japanese loft japan furniture contemporary wooden table wood table dining table wood table wooden table
grabcad
free
ULA Challenge, Boattail Bracket
...ient. the bracket is lightweight without compromising it's strength which is one of the main tenets of aerospace engineering.
grabcad
free
Bracket v1 - ULA Atlas V Rocket
...erall shape of the original part.
mass: 0,047kg/0.10lb
volume: 34.02cm^3/2.08in^3
manufacturing method: fdm
material: ultem 9085
grabcad
free
Kurniawan ULA Rocket Bracket V 1.1
....
load distributed to the bolt hole through 3 ribs to get maximum strength and minimum weight.
best regards,
m arie kurniawan
grabcad
free
ULA _ ATLAS 03
...
radii of gyration :
rx= 1,299509 in
ry= 1,249790 in
rz= 0,582733 in
have fun & good luck !!!
grabcad
free
ULA Bracket DT-4
...is and predicted max. von mises stress = 4378 psi under ultimate load 600 lbf which applied uniformly in the negative z direction
cg_trader
$150
SAUDI ARABIA ULA Gate WITH an ARABIAN HORSE ATTACHED IN THE BACK
... it does have dates (frut) designed spacully in dimond-cut way to reflect the light all the way around to the palace and a horse.
grabcad
free
ULA bracket I-beam
...ntact surface requirements are met.
depending on the 3printer the model can be printed with minimum support in the z direction.
grabcad
free
ULA _ ATLAS 05
...
radii of gyration :
rx= 1,283748 in
ry= 1,238824 in
rz= 0,564915 in
have fun & good luck !!!
grabcad
free
Optimized Bracket for ULA Challenge
...hment points. pin constraint does not allow displacement in the x, y, z directions, but allows rotation in around the axial axis.
grabcad
free
ULA BRACKET V.01
...on mises): 1,996 psi
factor of safety: 4,500 / 1,996 = 2.254
applied force: 600 lbf total (2 face)
applied fixture: 4x bolt holes
grabcad
free
ula rocket part challange
...culations:
1-tension stress does not exceed 2500 psi
2-bending stress does no exceed 2800 psi
3-mass =.08 lb
volume=17 inch^3
grabcad
free
Bracket for ULA Rocket Hardware Challenge v2
...ions (fea simulation), step and sw files included.
mass: 0,05 lb
max. von misses stress: 20,83 ksi
max. displacement: 0,036 inch
grabcad
free
ULA envelope AD11-by Adriano Barissa
...this project.
i chose a cleaner design with thicker walls in order to facilitate printing and have a more satisfactory outcome.
grabcad
free
ULA Support Bracket.01
...upport bracket is optimized for 3d-printing in z direction with a minimum support material.
the model has been revised 10/19/16.
grabcad
free
ULA Support Bracket.02
...ort bracket is optimized for 3d-printing in z direction with a minimum support material.
the 3d model has been revised 10/19/16.
grabcad
free
ULA Geometry Optimization
...: 0.972lbm
optimum geometry: 0.416lbm
reduction of 43%
results (stress)
original geometry: 2894.4psi
optimum geometry: 2948.7psi