7,130 thicker 3d models found
Download or buy, then render or print from the shops or marketplaces.
3D Models below are suitable not only for printing but also for any
computer graphics like CG, VFX, Animation, or even CAD. You can print these 3d models on
your favorite 3d printer or render them with your preferred render engine.
Please note that the 3D model database is only a Search Engine. You should
visit the original websites. Most of the models can be easily imported and rendered
with Autodesk 3ds Max, Maya, Blender, C4D, and Sketchup. Check for online
3d model conversions tools for your file format.
Shown 2 of
60 pages
thingiverse
free
Shadowflake - Thicker & Larger Hole by dantoth
...e: scaled it down to about 50mm wide, increased the thickness to 3.2mm, made the hole larger. perfect size for some fishing line.
thingiverse
free
Gamecube wall mount, thicker and with a small angle
...i decided to make some improvements it is a bit thicker now and i designed it with an small angle so the gamecube stays in place.
thingiverse
free
Oculus Quest 2 DIY (Elite) Strap Thicker by Mamsie
...pull them out a bit to make it thicker. i included the blender project, so you can easily make it thicker or thinner as you wish.
thingiverse
free
Aero part cooling shroud thicker mount by Setesh2000
...ler so it can support the weight of the fan without the holder. i use hot glue to hold the fan into the mount and it works great.
thingiverse
free
CGC Thicker Slab stands (newest cases) by orionfrg
...urrently being used.
this is a remix of the cgc clip stands found here. i just added 2mm more in length to support thicker cases
thingiverse
free
NanoLongRange with thicker camera plate by Floxflux
...lates were 15mm, this one is 14mm so it fits caddx ant without bending the plates. also added a brace at the bottom of the camera
thingiverse
free
Thicker Mold by xanicel
...om srek.
the hull of this mold is thinner (0.5mm wall thickness) than the original part. it is easyer to remove (break) the wall.
thingiverse
free
Thicker Chain conector for thing:2960184 by pinedax
...it thicker and make a conic conection between the body and the "u part" of this piece.
i amplified the chain by an 130%
thingiverse
free
Empire and Rebellion drink coaster set (thicker) by innos7735
... coaster set (thicker) by innos7735
thingiverse
originally designed by thecase
used sketchup to thicken the coasters to ~0.25 in
thingiverse
free
Top with thicker posts by specificmass
...1mm extra thickness around this area. i do not have a softrock to test with, so please let me know if there is any interference.
thingiverse
free
Thicker and reinforced duct for Shendrones Squirt V1
...forced duct for shendrones squirt v1
thingiverse
print in tpu. mine did grate with 40d tpu, 20% zig-zag infil and 2 layer walls.
thingiverse
free
ENTR Mul-T-Lock Retainer Ring - thicker version by Hauzer
...e.com/thing:4595202
this version is thicker.
the eject arrow handle looks little bit diffrent (i think its more pretty like this)
thingiverse
free
thicker i3 mega spool arm by x9x9x9x9x9
... off and went back to the stock spool holder. but thats just personal preference and figured i'd upload it for everyone else.
thingiverse
free
2u networking rack faceplate for sg1100/RPi/ether switches (thicker trays)
...king 2u faceplate for an sg1100, raspberry pi units and 2 ethernet switches
this has thicker trays for greater manufacturability.
thingiverse
free
Thicker Sd Card Holder by 16807
... walls to 3mm and the base/overhang to 1mm. the result is sturdy enough not to bend and allow cards to fall out. no cover needed.
thingiverse
free
Phone Stand - for thicker phone or tablet by TwistedStick
... twistedstick
thingiverse
i printed at .2 with no supports.
kind of laid back on thin device, 45 deg on my g4 with a thick case.
thingiverse
free
Piggy bank with thicker bottom and screw cap
...bottom.
so i made the bottom thicker, now you can get the money very easy out.
you can scale the piggy bank larger if you want.
thingiverse
free
VAS Antenna Cover (thicker) by geneticmutation
...ned the wall and increased the height slightly for additional clearance. it is less likely to break/delaminate if you take a hit.
thingiverse
free
LeFabShop Elephant with thicker trunk by ericgus
...shop elephant (smaller version). i thickened the truck as my 2 1/2 year old kept performing ad-hoc rhinoplasty on the poor beast.
thingiverse
free
AM8 Bear Corner Damper T-Slot Squash ball anti-vibration - Thicker by xcooling
...damper t-slot squash ball anti-vibration - thicker by xcooling
thingiverse
removed ball ridge to lay flat on the bed
50% thicker
thingiverse
free
Radiomaster battery cover for thicker battery by dronotron
...mixed the original battery cover to allow using a fatter battery. it doesn't interfere with the crossfire module in the back.
thingiverse
free
Polygon Mask - Voronoi Style (single walled, thicker and flat bottom) by roman_hegglin
...erse
i just made some adjustments over thing 191652.
this one is thicker and has a flat bottom. so it should be easier to print.
thingiverse
free
Fallout Decision Coin - Thicker Engraving by industriald
...decision coin with 0.6mm deep engraving instead of the 0.3mm engraving.
fixed by microsoft's wonderful cloud netfabb service.
thingiverse
free
Ender 3 Filament Guide (thicker and stronger) by wimg
...ger) by wimg
thingiverse
stronger version of https://www.thingiverse.com/thing:3059604
ideal to mount under the filament holder.
thingiverse
free
Thicker Hufflepuff Crest by khackbarth
...igns just to demonstrate the difference. i've provided two modified designs: 175% larger and 200% larger in the z dimension.
thingiverse
free
Scx10ii thicker battery spacer by Damion1
...to better hold my 3300mah 3s lipo pack in the stock battery tray. the original ones wouldn't slide far enough to hold firmly.
thingiverse
free
BMG-X2 Empiricus BLTouch shroud and thicker bridge.
...ce the ducts properly from the nozzles, and the left shroud is modified to fit a bltouch at the right height from the nozzle tip.
thingiverse
free
Thicker Floor Earbud Case Large 3.5mm Jack Slot by jandcando
...an extra 0.4mm thicker, solid downwards. i'm using tpu and two layers of floor was just too flimsy and i wanted to double it.
thingiverse
free
Thicker Google Home Mini Invisible Mount by JulianPH454
...sible mount by julianph454
thingiverse
i was having issues with the original breaking so i thickened the sides a little bit more
thingiverse
free
Runabout Model Power Boat with thicker hull by 3DMaterializer
...giverse
learn to 3d model and animate at:
3d builder users and blender beginnershttps://www.facebook.com/groups/762817337537667/
thingiverse
free
Reittec Polisher Thicker Legs/arms by Gunslinger59
...nd time). strenghten the front legs/arms by glueing these over the top of the existing ones.
hope i saved you some frustration ;)
thingiverse
free
Bucket O' Octopodes (thicker legs) by moleofproduction
...topodes," pronounced "ahk-top-oh-dees." not that it at all matters in the slightest.)
love love love the original.
thingiverse
free
Thicker Wings SR71 Blackbird by Tyrdle
...ly a layer or two thick, but now they are thick enough to have a little infill. i also upped the polygon count while i was at it.
thingiverse
free
ISOFIX Guide Long/Short Version (thicker walls) by Merg1234
...ament and 0.3 layer height, 0.2 recommended with supports and stronger filament like abs or petg. note the pla is strong as well.
thingiverse
free
Thicker clamp for Raspberry Pi 4 Touchscreen Case for Octoprint by rampardes
...med because of the heat, so i've created thicker one. i am not sure how long this is going to last, but i'll update here.
thingiverse
free
Table Cable clip with thicker arm section by TechTeacher
...r arm section by techteacher
thingiverse
i found the original clip arm too thin and springy so i redesigned it using tinkercad.
thingiverse
free
Bucket O' Magnetic Octopodes (thicker legs) by LucidOne
...
thingiverse
perhaps like me you are in need of a magnetic octopus or octocat. obviously this is strictly for research purposes.
thingiverse
free
Savage Wolf mech' thicker arm
...for madcat iv mech, otherize called savage wolf, so i didi a 3d, just to relieve myself frrom sculpting anew, anew, and anew too.
thingiverse
free
Rear lens cap for Nikon F-mount, Thicker Body by shadetherapper
...rear lens cap for nikon f-mount, thicker body by shadetherapper
thingiverse
.2mm, 50% infill
no supports.
thingiverse
free
9v Battery Dispenser with Thicker Walls by johnbintz
...t the walls were too thin for my printer to handle. i thickened the walls in blender and it printed out great with a small z hop.
thingiverse
free
Thicker Spool Lip 1.75mm Filament Clip by borgchick
...was a tiny bit too tight, i slightly enlarged it in this, so you can print this as is, and the 1.75mm filament should fit easily.
thingiverse
free
Thicker and longer Y bar end for printrbot/wallace by aliekens
...se hits bolts that retain the heatbed. these ends also assumes m4 nuts and bolts instead of m3 nuts and bolts for more stability.
thingiverse
free
Smart Effector fan duct with thicker walls by kilpelaj
...giverse
a modification of "print cooling fan mount for duet3d pcb effector" with a special emphasis on wall thickness.
thingiverse
free
BMG Side Mount - 45° - Thicker mount
...design's motor mounting plate, untested as i actually use 2020 extrusions, but should work regardless.
edit: corrected scale.
thingiverse
free
Ender Dragon thicker wings by richardtracy
...bed. decided to thicken them by 1mm. the slide mounts are the same and still work with the original arms. easier to print though.
thingiverse
free
Dog poop bag holder with thicker ring by AllThumbsUp
...her infill depending how wild your pup is.
for the version without the small loop, just drag the 3d object file into your slicer.
thingiverse
free
Thicker version of Zeycus'abstract chess set by helane
...0scale, except for the king that i make bigger (550/600) and the pawns (1000).
you need to had supports here and there ...
enjoy!
thingiverse
free
UBQ V2 200 with thicker motor mounts by aceangel
... aceangel
thingiverse
my ubq kept breaking at the same spot near the motors. just made the mounts as thick as the arms, like v4.
thingiverse
free
dual z axis plate - thicker by Poblopuablo
... (https://www.thingiverse.com/thing:4571528)
i thickened the plate for added rigidity.
4 perimeters, 40% infill. supports needed.
thingiverse
free
Cigarette + Lighter Case *thicker walls* by catohagen
...r in nylon and it felt too soft and weak, so i remodeled a new one with 1.6mm walls.
printing with 248c and 2 perimeters/100%fill
thingiverse
free
Giant Lego Genie or Ninja Hair (thicker) by ghfame
...verse
i discovered when i printed the genie hair that it was paper thin. i thickened it up so it will be a better print. enjoy
thingiverse
free
Wargaming bases remix: 25mm, thicker industrial bases by WRonX
...yer, so don't ask me, why.
i just thought that maybe someone else could make use of this remix, that's why it's here.
thingiverse
free
QUBD Twoup M3 Nut Holder (For Thicker Y-Bed) by j0ckinjz
.... it's for m3 nuts, not the larger m4 nuts. it fits the thicker y-bed frames. it should fit models from x-mas 2014 and newer.
thingiverse
free
Minimalistic Iphone 6/6s/7 Dock, Thicker for Phone Case by Charles3rd
...minimalistic iphone 6/6s/7 dock, thicker for phone case by charles3rd
thingiverse
a minimalist dock for iphone.
thingiverse
free
Dog Poop Bag Holder for thicker leashes by kitsumeow
...e.com/thing:2317291 adjusted for wider leashes.
the original was designed to fit 2mm leashes, and i adjusted it for 3mm and 4mm.
thingiverse
free
Kossel clear j style hotend mount slightly thicker then stock and room for tube connector by ledfreak3d
...eak3d
thingiverse
kossel clear j style hotend mount
slightly thicker then stock for beter stability and room for tube connector
thingiverse
free
SoftRF MarkII Top cover no letters and thicker antenna holder by bortek
...p cover no letters and thicker antenna holder by bortek
thingiverse
just a remix of top cover.
thicke antenna holder
no letters
thingiverse
free
Flashforge Dreamer - Side loader Filament Spool Holder - Thicker Hangers by BetaCygni
...s because the thicker part of the hook is only one one side.
my original prints were in abs. i printed the thicker print in petg.
thingiverse
free
kap42 Thicker Player Item Holder by Virsa
...gle layer with some settings. this version just moves the back of the insert out a little bit.
these fit into the original case.
thingiverse
free
A Thicker Mount for AM8 corner brackets by tashayarsrevenge
...rackets, they're too thin for the recommended screws to screw tightly against the rail, so i've made a 5mm thick version.
thingiverse
free
Thicker Retention for Universal Magazine Holster by AlbertP
...is on and tried my best to shake my cz shadow magazine loose and it wouldn't fall out. let me know if it works for your mags.
thingiverse
free
Reformatted Drawing of Thicker Heated Build Platform by
... block, which has company information on it). feel free to be loosey-goosey with the tolerances but that is what i am aiming for.
thingiverse
free
Thicker Kissing Clothes Peg by mettauk
...hick
if you like or use this please send me a little support, just a pound or two (or dollars etc) at paypal.me/mettauk thank you
thingiverse
free
Thicker Ciclop Back Cover by lbretth
...into solidworks and made it 2mm thick. i printed again with the same settings (with raft and supports) and it came out perfectly.
thingiverse
free
sphere60 thicker version by RaffoSan
...please see the original work of crab:https://www.thingiverse.com/thing:4609
modified first with fusion360 then with illustarator.
thingiverse
free
Hephestos Cable Chain Mount (thicker walls) by sash0k
...hestos cable chain mount by davidcopper.
update: try this version https://www.thingiverse.com/thing:2608068 it's much better.
thingiverse
free
ipad (with thicker case installed) stand thanks to galiettd by manddarran
...his is a generic ipad stand that will hold an ipad with a genuine ipad case.
i edited one that i found on tinker cad by galiettd.
thingiverse
free
Contact tuner adapter for thicker guitar headstocks/instruments by cgfan
...addario contact tuner, and another one for a chinese clone. simply replace the factory sliding tab with this 3d printed version.
thingiverse
free
Twisted Triangular Cup (Thicker Walls) - Prepped for Flexible Filament by BioInspiration
...ckstarter campaign for willowflex to show that it can hold boiling water.
a big thank you to theoldboy for the original design!
thingiverse
free
thicker ear saver by Puckhed33
...hours a day. i have tried heating it up a bit with a heat gun and laying it across a round can so it fits around the neck better.
thingiverse
free
Stackable Box (Thicker Version) by DENOVATOR
...소요되며 세팅은 하단 세팅을 사용하시면 됩니다. shell 은 0.8(1 line)을 주고 infill 을 100으로 주면, 적층결대로 부서지는것을 다소 방지할 수 있습니다.
autodesk fusion 360으로 디자인하였습니다.
thingiverse
free
Anaklusmos (Riptide) shim and thicker crossguard by drcameron
...e and multiple of layers of paint using colors, that according to her, match the books.
i made all of the changes in tinkercad.
thingiverse
free
Adjustable heaphones holder for thicker counters by evilsgood
...l. print parameters can be set different, i actually print everything on those.
i create that after watching: maker's muse :d
thingiverse
free
Kyogre - Printer Friendly + Thicker Tail by Na16Patman
...e "arms" of kyogre, meant to be painted red. will upload finished product when i am able to finish and paint the model.
thingiverse
free
Thicker MakerGear Bed Clip by LelandGreen
...or cracking a clip.
this is modified from the stl files provided by makergear in this repository: https://github.com/makergear/m2
thingiverse
free
Thicker rimmed Gear Wheel Seconds for 3D printed mechanical Clock with Anchor Escapement by tjhowse
...ing a circle of individual, unattached gear teeth even on 0.1mm layer height and automatic extrusion width calculation in slic3r.
thingiverse
free
OpenAPS Edison/Explorer 2500 mAh modified @rsilvers design for thicker single-battery by tynbendad
...here's also a hole opposite the explorer board reset button so you can poke something thru to reset without opening the case.
thingiverse
free
fanduct for thicker fan 4010 for Flying Bear Ghost 5 universal printhead (v2.0) wi by chrisdaloa
...icker like this https://amzn.to/38bpmff
print others component from the original design https://www.thingiverse.com/thing:4615328
thingiverse
free
LCR-T4 Case with PP3 battery holder + thicker sidewalls by davidmpye
...le when i printed them.
for my t4, i used the (also remixed from this thing) top lid: https://www.thingiverse.com/thing:2554369
thingiverse
free
Anti Z Wobble for Anet A8 (Thicker) by elliotboney
... screws over time, the tab where they go through started to crack/break so i thickened it up a bit so i could crank it down hard.
thingiverse
free
Hayden Effector Clamp - Stronger, Thicker for e3dv6 by clearlynotstefan
...e3d v6, as i could clamp mine all the way tight and still get wiggle, also beefed up screwholes and i tore mine off the original.
thingiverse
free
Prusa i3 lead screw upgrade + 2mm thicker motor mount by trio36
...upgrade + 2mm thicker motor mount by trio36
thingiverse
with my filament this part would flex a little. i beefed it up a little.
thingiverse
free
The office floorplan thicker floor w/ oscars desk added by Tacticalsatan
...y tacticalsatan
thingiverse
i noticed the original file was missing oscar,s desk over by accounting, so i added one in tinkercad
thingiverse
free
My Customized spool holder for M3D printer 15mm thicker walls
...ttp://www.thingiverse.com/thing:731318
created with customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=731318
thingiverse
free
Roost Laptop stand modifcation to fit thicker laptops (endorsed By Roost Industries Corp.) by gmolinario
...e replaced to the originals.
this modification has full permission from roost industries corp. for use in open source community.
thingiverse
free
Z-axis floating-nut-arrester (Thicker) by JadeKnight
...ry well without damaging the arrester.
looking at the picture, you can see the change made in the bottom of the one on the right.
thingiverse
free
New version of the head with thicker ears that print better! by I-Bioloid
... head.
robotis.com/xe/
mike-ibioloid.blogspot.com/
sourceforge.net/projects/darwinop/?sms_ss=blogger&at_xt=4cf135c87d86608b,0
thingiverse
free
larger head band forbetter control of more and thicker hair by lokilaufeysen
...as good but the more hair your have a stronger band you need this is for that sort of hair and people who want a lager wider band
thingiverse
free
TI4 Insert -- Thicker Faction Lids
... won't fit in the original faction holders, so i made a few quick and easy edits to that and they all fit together perfectly.
thingiverse
free
Hard Drive Case, thicker (2mm) by TastyWhale
...t, i didn't mod those so i'm not including :)
(yes the drive is in upside down in the pic, i assure you the pins line up)
thingiverse
free
Drawing Machine - thicker walls for rod fix screws by FiX2k
... fix the rods.
added 2mm wall thickness, so you can better fix the rods without breaking the wall (or lose it while printing...)
thingiverse
free
Cetus3D Fan Duct (Thicker Pre Production Version) by 3DWP
...895795.zip (thread: https://www.cetus3d.com/community/forum.php?mod=viewthread&tid=119&extra=page%3d1)
http://www.3dwp.nl
thingiverse
free
Samsung Galaxy S4 mini cover with thicker walls by HiJech
...e you enjoy!
tell me if it works for you!!
:-)
thanks goes out to elgrande!
video can be found here http://youtu.be/weqaihran1y
thingiverse
free
Hephestos Cable Chain Mount (thicker walls, open) by sash0k
...giverse.com/thing:943620).
if you cant connect chains without damaging, you can try this opened version. after assembly, glue it.
thingiverse
free
Wanhao i3 Thicker Bed Plate (V3) by thatch
...ews clear the frame as placed. i can't do 3-point leveling on the front/rear edges without modifying the frame.
photos soon!
thingiverse
free
Thicker Magnetic Screw Tray and Magnetic Divider by reakain
...fied that to hold a magnet to connect to the center magnet on the part tray itself, that way the divider doesn't move either.
thingiverse
free
Pegboard Socket Holders - for thicker peg board by Nihlton
...dded 2 x 1/4" part
get the fusion 3d file from the original if you want to modify.
https://www.thingiverse.com/thing:2910804
thingiverse
free
Thicker plate Platform Jack for ABS Printing by piercet
...er feet to clear the strakes. if they don't work as is, i'll make a modified version here in a minute. printing this now.
thingiverse
free
Makerbot Replicator 2 end-stop switch spring replacement (thicker spring) by jasong
...hingiverse
i modified the scad file slightly to make the spring a bit more sturdy. thanks to dexcisco for 99% of the hard work.
thingiverse
free
HyperCube Filament Fan Duct - Thicker Walls by henryarnold
... sink. i fixed it with one layer of black electrical tape. this filament fan duct is still a good upgrade because it is stronger.
thingiverse
free
The Office floor plan - thicker floor
...riginal, feel free to scale it as you need. scaling to 130mm keeps good detail and lets me print several at a time on my ender 3.
thingiverse
free
Moskito 70 thicker Prop Guard 1935 props by jacobbloy
...o crazy.
after print i strengthened the joins of the legs with a soldering iron just smoothing the layers.
recommended to use abs
thingiverse
free
Spidex Micro-Quad Side-Frame Set - TALL & THICKER by secretspy
...o longer use this quadcopter frame because it was too fragile.
see the full frame here: http://www.thingiverse.com/thing:326062
thingiverse
free
Flexible Mask Valvy - hepa body w/thicker dome shell by rheaghen
... to seal at the dome around the inlet port. i increased the thickness by approximately 1.5 mm. much better print results with pla
thingiverse
free
Remix of Optical Illusion Pinwheel with Thicker Blades by cbc
...more revs for a given wind speed. although for the cool visual effect that dalpek's original has i prefer a slower rotation.
thingiverse
free
MarkABot-Thicker BL Touch Arm V2 by redozqld
...w.aurarum.com.au/
all other equipment, is designed and referenced in the design/remix
http://creativecommons.org/licenses/by/3.0/
thingiverse
free
JJRC Q46 12mm hexagon adapters for track widening (1.5mm thicker) by TheDIYGuy999
...it tippy. so these special 12mm hexagon adapters allow to widen the track 3mm.
video: https://www.youtube.com/watch?v=mi6nwktodpc
thingiverse
free
Thicker 2 inch shower tub drain grate with easy hair removal by Paintballmagic
... lasted about a week before the retainer ring busted off.. i increased the wall thickness an added a few chamfers for strength.
thingiverse
free
Gloomhaven Character Box V2 (Thicker Base + Tinker Box)
... character boxes to replace the paper/cardboard pieces included in the game! i'll include a few pictures later this evening.
thingiverse
free
Buddha Optical Illusion w Thicker Base by RayneMan
... hole in the bottom for me because the base is so thin, so i increased the thickness of the base and now it prints without issue.
thingiverse
free
Thicker walls Coat Buttons for adafruit NeoPixels by esra
...hem.
i also printed a half ball to create a stronger diffusion.
but this design is just quick&dirty, so i did not upload it.
thingiverse
free
Thicker Dual Fan X-carriage for self-aligning bronze bushings by OoiTY
...an mounts. i also eyeballed an x-axis belt tensioner and ram on there, not sure how well it'll work, feedback would be great.
thingiverse
free
Xbox One S X controller wall mount (for thicker battery pack) by misenique
...k and snaps into place.
the mount has a hole for a 4mm countersunk screw.
if you have any questions feel free to ask me anything.
thingiverse
free
Adjustable BL-Touch sensor mount for Ender 3 and CR10 REMIX - 1mm Thicker mount
...he extra mm in thickness means the offset needs to be adjusted by 1mm as well. if you make this please provide feedback, thanks!
thingiverse
free
ANET A8 | Rear Bed Level Sensor Holder 12mm - Thicker for single piece mounting by OtterNas3
...as the sensor doesnt move that much, and it is ok in only 1 mounting point.
but always: better safe then sorry ;)
hope this helps
thingiverse
free
Thicker Dark Souls Sunlight Medal by gibleteousjack
...y resolve and 100 micron for the 2.13 inch medal.
i'll post some pictures after he gets done sanding and painting his medals.
thingiverse
free
2020 filament guide (thicker version) by DeeEyeWhy
...orque on the m4 screw when attached). then i used the rotated loop clips on the sides to guide the filament into either extruder.
thingiverse
free
Table tennis Oculus VR accessory - thicker handle, stronger clamp wall
...le. it's amazing this way..no sanding needed. i also tried 15% instead of 19...seems fine.
https://imgur.com/gallery/g9khvpb
thingiverse
free
Green Lantern Mask (Thicker) by Capnmergn
...t would print properly.
i'll be printing another one soon with better scaling.
props to buchsixghoul for such a great design!
thingiverse
free
Ender 3 V2 Rocket Side Spool Arm with Thicker Base by Blackeroni
...ther two positions.
i have created a smaller version to fit the right-front corner and the back-center.
a m3-.50 nut is required.