thingiverse

free

rainbow vacum noozle by swolter1975

...igh pressure long sized noozle for the rainbow vacuum cleaner. works great for corners and hard to reach places with small space.

thingiverse

free

Gloomhaven Deck Holder - 0.8 noozle

...gloomhaven deck holder - 0.8 noozle thingiverse i needed a deck holder that is easily printed on 0.8 noozle so i designed one.

thingiverse

free

noozle, pendant or keychain for maker by alleberg64

...morrow i'll print a big noozle !!! it will be a beautiful keychain ...i believe that every maker will like to have this item!

thingiverse

free

Vacuum cleaner noozle for water suck by Majkeen

...vacuum cleaner noozle for water suck by majkeen thingiverse tube - noozle for vacuum cleaner inner diameeter is 35 mm

thingiverse

free

Gloomhaven Standee for 0.8 noozle

...ke https://www.thingiverse.com/thing:2507046 i've changed wall thickness to 2mm, so it's better printed on my 0.8 noozle.

thingiverse

free

Involute Blower Fixed Noozle by Trispectiv

...der then it should be. the complete thing and original thing can be found at http://www.thingiverse.com/thing:135718 (#135718).

thingiverse

free

shisha noozle hammer thor by jfgalo14

...oozle hammer thor by jfgalo14 thingiverse nozzle hammer the images are of a different version, currently it is wider and shorter

thingiverse

free

Little Box Pen Holder for 3D noozles by Baptista25

...hingiverse is a remix from little box pen holder, by 3d monkey. i changed the data device slots for fdm 3d printer noozles slots

thingiverse

free

shisha noozle jedi by jfgalo14

...i logo, it is not necessary, but it is recommended to add a rubber for better support. quality: 0.2 infill: 20% support speed: 60

thingiverse

free

Endless screwable container also for 3d noozles by tzpetlover

...d don't fall out. mk8 increase size to 140 percent mk10 increase size to 160 percent labels do not line up in the same place

thingiverse

free

Noozle cooling for ender 3 stock fan by ericcay

...noozle cooling for ender 3 stock fan by ericcay thingiverse ender 3 nozzle cooling

thingiverse

free

needle holder noozle cleaner

... magnet to stick to metal parts, 8mmx1mm circular magnet. can be adapted to be configured in the 20x20 slot-v frame or any other.

thingiverse

free

LED Noozle 3mm and 5mm Creatr by gvogele

...led noozle 3mm and 5mm creatr by gvogele thingiverse this is for the leapfrog creatr. led for nozzle in 3mm 7 led and 5mm 8 led

thingiverse

free

Anycubic Max4 Pro - Fan Duct with Led For Noozle

... max4 pro - fan duct with led for noozle thingiverse print with pet or abs you can customize with autodesk inventor as you want!

thingiverse

free

Noozle Viewing Fan Shroud for wider Fan by abrandl

...ide note - i learned today, that the i3 plus uses a 24v noozle fan. therefore, the delta blower i planned to use does not work...

thingiverse

free

Anet A8 Noozle Fan by mikropig

...enjoy and place it flat on hotbed if you don't like to apply supports. obviously rotate 90° from the position the file comes.

thingiverse

free

Ender 3 v2 Noozle Divider by meissama

...om. i bought this kit on amazon: https://www.amazon.com/gp/product/b07wtb47n7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=utf8&th=1

thingiverse

free

Noozle Cleaning Brush Corner by LeChaletDuMaker

...min_pos + 15)} then in your slicer, use g12 p2 r6.5 s5 (for example) in your gcode starting sequence https://youtu.be/pzpdnw_ul5w

thingiverse

free

Makita vaccum cleaner noozle plug and holder (BCL182Z) by Fresh

...eaner properly, i needed a plug for it. for this plug i printed an appropriate holder. i copy the original nozzle holder as well.

thingiverse

free

Anycubic Mega Hotend-Housing with Air Noozle (Mega-S, Mega-X, I3-Mega) by Lupfe

... the tight space you have to make the barcket, which holds the hotend, a bit thinner, so the sunon fan can fit under the housing.

thingiverse

free

Garden underground sprinkler by visto

...edit it you need to insert string for hideing noozle while...

thingiverse

free

Vacuum nozzle by mrojod

...vacuum nozzle by mrojod thingiverse this is a vacuum noozle to replace the stock one of 90% of...

thingiverse

free

Long plate pot

...for original scale, x2540 % scale. optimized for 0.6mm noozle ...

thingiverse

free

Power Supply Holder as Wall Bracket by Shadetec

...it with abs in 0.2mm layer and a 0.3mm noozle ...

thingiverse

free

A20M 3 in 1 by benn8

...di montare la ventola da 24volt sul supporto soffiatore noozle ...

thingiverse

free

Adventurer 3 dual fan

...fast and easy to print. no problem to change noozle ...

thingiverse

free

Tronxy XY-2 Pro Vent Ring by JudasPT

...pro vent ring by judaspt thingiverse plug and play noozle vent for the tronxy xy-2...

thingiverse

free

GEEETech i3_fan_duct by corradobondioli

...geometry in order to have more air to the noozle ...

thingiverse

free

E3d v6 Fan duct V2 by skorpia

...of this one https://www.thingiverse.com/thing:2719129, with closer end to the noozle that improves...

thingiverse

free

Tronxy 40mm cooling fan by JorgeGG

...hot end. the air flow point directly to the noozle to avoid layer...

thingiverse

free

20x20 Testcube rounded by phwagner

...can be tested: stringing flow overhang wall adhesion scaling noozle ...

thingiverse

free

xmas star wars logo ornament

...easy one piece printing medium speed 70 mms 0.4 noozle or higher no supports inspired in the saga...

thingiverse

free

Rancor dungeon door by JuanMa76

...dungeon door. not acurrate but it works fine. 4mm noozle sunlu pla hot end:195 bed:...

thingiverse

free

soporte de sharpie o lapicera para soporte e3d : thing 3523424 by nicolasnuno

...para soporte e3d : thing 3523424 by nicolasnuno thingiverse noozle 0.4 layer 1200 o cualquier configuracion que ya tengan...

thingiverse

free

DJI Osmo Tripod Mount by s00500

...tripodmount for 3/8 inch tripods, print with at least 4*noozle for the shellthickness to cut the thread in afterwards,...

thingiverse

free

Own J-Bowden-Hotend (E3D v6) for AnyCubic Prusa i3 (22 or 25mm) by Cybi

...to 22mm. additionally i've reduced the heigth of the noozle cooling part, so that you can better adjust the...

thingiverse

free

Tzolk'in - fits expansion and promos

...one box and it's possible to print via 0.8 noozle ...

thingiverse

free

Simple Coins by Hezekiel

...22x2mm value 1 24x2mm value 2 26x2mm value 5 noozle diameter max. 0,4mm layer height max. 0.2mm (0.1mm...

thingiverse

free

Spawn grid 145mm

...fixate with paracord or fishing line. optimized for 0.4mm noozle the gap is 8x8mm. with loose moss on it,...

thingiverse

free

5cm fan on mainboard ender 3 :) silence mood by jaroslavcecho

...to imput 24v(prevent damage board whem you print without noozle ...

thingiverse

free

しごとばこ - tool-box by piezke

...is for all the printer-assecoirs you need. all the noozle, tongs, darts and so on - orderly an pretty...

thingiverse

free

Simple Coins Double-Sided by Hezekiel

...22x2mm value 1 24x2mm value 2 26x2mm value 5 noozle diameter max. 0,4mm layer height max. 0.2mm (0.1mm...

thingiverse

free

Y Axis Bearing guide 608zz prusa i3 pro steel by EA4FSV

...install. glue if you prefer, but not is necessary noozle 0,4 pla -...

thingiverse

free

Pulsar DNV battery case lock by maserons

...the original one. printed it using abs and 0.2 noozle after printing probably the bigger screw hole needs to...

thingiverse

free

Kossel "Benny" Effector for reprap.cc Bowden Hotend by nischi

...screws. effector for bowden hotend 1,75mm filament / 0,35mm noozle / 4 ad pushfithttp://www.reprap.cc//index.php?main_page=product_info&cpath=6&products_id=95 bowden hotend 1,75mm filament /...

thingiverse

free

Iphone 12 case (SOLO TPU) by gtorosch

...gtorosch thingiverse iphone 12 case for tpu only 220 noozle 60 bed, retraction minima posible (yo use 6mm con...

thingiverse

free

Fan Duct mount LGX flexible kit Artillery by MpchBrwn

...duct, it allows some alignment in height with the noozle , check the images , its only 2-3 mm...

thingiverse

free

e3dv6 plattform Adapter for anet a8 by Starwhooper

...or addition parts that are offerd for the e3d noozle link to the part that you can fit in...

thingiverse

free

Holder 18650 Battery 2P by nguyenngoctranvu

...best to upload. i use anycubic kosel material: pla noozle 215oc bed heat: no layer height: 2mm speed:...

thingiverse

free

Ender 3 Fan Duct with standard parts

...in pla and have no issues with the hot noozle ...

thingiverse

free

Nozzle Cooling duct by Keugon

...throw the cooling rips and redirect it to the noozle not the most efficiant cooling option but you dont...

thingiverse

free

Trickerion all in one Inlay by Agyptra

...all sleeved with dogmagic (normal). i used a 0,8 noozle ...

thingiverse

free

Insert for Scaleauto slotcar wheel by jozzi8187

...thingiverse https://www.thingiverse.com/thing:4824203 inserts for scaleauto slotcar wheels. settings: 0.4mm noozle and 0,06mm layer highs. you can rezise most of...

thingiverse

free

power supply case for hrn150 by Dataclone

...is really small ) i am using pla / noozle 0.8mm/ infil 80 / not supports / not adhesion...

thingiverse

free

Anet A8 Filament Spool Holder by kingbain

...a8 filament spool holder by kingbain thingiverse shrank the noozle so it should fit smaller rolls. removed the logo...

thingiverse

free

Prusa i3, Z-axis bed levelling knob by stano312

...means higher tightness = lower distance between bed and noozle ...

thingiverse

free

PETG Cura 4.7 profile - Artillery Sidewinder X1 V4 by Minkio95

...for larger models, deactivate cooling. i'm using a .4 noozle let me know if it works or if i...

thingiverse

free

BETAFPV 75X Antenna and Beeper holder ~0gramm by m4rcde

...slow and precise! i was printing with a 0.4mm noozle at 0.1mm layer height. as smaller the noozle is,...

thingiverse

free

USB tiny ISP box enclosure

...perimeter & infill 0.65mm (for strong layers bonding). 0.4 noozle should work as...

thingiverse

free

Hive 0,4mm nozzle

...for bee and ant for insect, use following settings noozle 0,4mm layerheight: 0,2mm infill:...

thingiverse

free

Battery, USB and SD Holder by o3blig

...versions. choose the one you like. my printer settings: noozle 0,4mm extrusion width: 0,45mm layer height: 0,2mm top layers:...

thingiverse

free

Several irrigation tube clips by necromundo

...the cheap china system with 6mm tube and fitting sprayers/noozle. for more details, see photos. if you have recommendations...

thingiverse

free

4mm Glass Clips

...pre print script must be change to clean the noozle ...

thingiverse

free

Laser Air Assist 4040 by klotzi18

...my 4040 laser . please print the orginal air noozle from : https://www.thingiverse.com/thing:1688209 i hope that can help to...

thingiverse

free

Update! Fan_Duct_semicircular Hypercube Evolution by Peter1280

...note: to make this work as it should, the noozle needs to be turned backwards as seen in the...

thingiverse

free

cooler3 by Ferberto

...(thx darius121) but it's not correctly aligned with the noozle i modified the scad to add a small offset...

thingiverse

free

Document capsule by tlo

...reached a reasonable height, pause the print lift the noozle up by 100mm or so. insert the paper, manual...

thingiverse

free

E3dV6 HeavyDuty Wing by runkelruebenbauer

...blowing for cooling only the material and not the noozle wing can mirrowed to make it for left &...

thingiverse

free

5S Fixture for 3D Printing

...to our printing prozess, everything from aceton over the noozle (orderd for material and diameter) to the cleaning things...

thingiverse

free

Alpha Omega Bomb by Alexander149

...bit larger. the bomb should stay upright on the noozle this was tested with 40% infill. the bomb is...

thingiverse

free

Parametric hexagon box by leving

...170mm diameter. change the border to multiples of you noozle diameter, perfect would be...

thingiverse

free

Artillery X1 Z_axe reinforcement_No Supports by Pucel_a

...layer heigh, and 0.67 line width, with a 0.4 noozle in an ender 3 with all-metal hotend and direct...

thingiverse

free

extrusion multiplier test

...for cube !! : if you use 0,4 mm noozle print cube just wit 1 wall perimeter.this one perimeter...

thingiverse

free

Helicopter 450 Align&clone tail blade 62mm

...class helicopter there are 3 version printable with 0.2 noozle i suggest petg or abs best print position it's...

thingiverse

free

Coupler Nema 17 - 6 - 6.32 - 8 mm by o3blig

...- 6.32mm nema 17 - 8mm my printer settings: noozle 0,4mm extrusion width: 0,45mm layer height: 0,2mm top layers:...

thingiverse

free

Printing nozzle polishing adaptor for proxxon rotary tool by tifn

...issues as the material tend to stick to the noozle this was the motivation for this design. my first...

thingiverse

free

E3D V6 Fan Adapter by mikropig

...and managed to keep the fanduct far from the noozle prevent melting by giving it a 20° angle. i...

thingiverse

free

Megaman Zero Lego by skorpia

...you have a perfect calibrated printer, and really small noozle you can try make it standard lego size without...

thingiverse

free

Velcro like fixation by carlesoriol

...printed in my bq prusa i3 hephestos with pla noozle size: 0.4 layer size:...

thingiverse

free

Sony Minidisc MZ-R37 Hold Slider by Himeno

...redesign the slider and print it with a 0.2mm noozle and a 0.10mm layer and raft. it fits on...

thingiverse

free

REAL filament holder spool / ENDER 3 by truckercech

...on photo. i put infill 5%, 40mm/s speed 0,4 noozle printed 3...

thingiverse

free

razor e300 scooter handle by Dataclone

...another scooters models. my printer: ender3 my cura config: noozle size:0.8mm 0.32 draft quality infil:10 print speed:100x filament: pla...

thingiverse

free

Easter bunny earrings by Misterxp

...a blob collector. used to clean any drooling from noozle after colour change. should be first object printed. scale...

thingiverse

free

Remix - Top with 2x 50mm fan by vortex_pr

...you can find at the original project:https://www.thingiverse.com/thing:1937232 abs 0.4 noozle 0.3 resolution 20%...

thingiverse

free

Socket cover, AC line baby protection plug CEE 7/7 by RoBotniK

...use this system. i printed it with a 0.4 noozle 0.25 per layer, infill 20-25%, 4 top layers. fits...

thingiverse

free

Toolbox for Prusa i3 by toyotabus

...nowhere to store your tools like allen wrenches or noozle? i recognized that there is a lot of wasted...

thingiverse

free

Quick tool change DOUBLED! by sieclaprzemyslaw

...(i have one for 0.4 and second for 0.8 noozle. i have made some prints in petg, v3 works...

thingiverse

free

Abstract Vase by zaky20

...and half hour to print it with 0.4 mm noozle and 0.2 mm layer height. feel free to print...

thingiverse

free

MICRO PCB SUPPORT KUKA ARM - MINIMALIST by Dataclone

...easy print. not support required i'm using: cura 0.4mm noozle 0.2 quality print 50mm print speed infil 40% youtube:...

thingiverse

free

bipin Porta dicroica led Downlight led cover lamp for 3d printer for 2020 2040 rail by mpcolman

...i made this print in pla with an 1.2mm noozle very fast print! 0.2 resolution with no supports and...

thingiverse

free

Z Endstop para Clon Prusa Steel i3 Argentina // Z Endstop for Prusa i3 Steel CLON Argentina by GOrtega

...para el diseño toolson edition:https://www.thingiverse.com/thing:1054909 se puede imprimir con noozle de 0.4 y 0.8 diseñado considerando los parámetros de...

thingiverse

free

Mac Mini VESA 200 support by octavio

...supports, use wahthever you prefer. printed with a 0.8mm noozle at 0.32mm...

thingiverse

free

Rectilinear flowerpot 14x14x12 cm by Movil

...it's too low in my case with a 0.4 noozle i dunno this are the best settings for everyone....

thingiverse

free

Hotwheel real riders cragar type by jcmartens7

...14mm diameter. idealy print using a 0.2 mm diameter noozle abs for the wheels, and flexible filament for the...

thingiverse

free

Subaru Justy interior fan "filter" by Justy_guy

...and bottom layers - just infill and perimeters (0.6mm noozle in my case, but 0.4mm would work too for...

thingiverse

free

Mobile Keyboard Deck Stand by Dataclone

...the base_chinav2. my printer: ender3 infill: 80mm speed: 70mm noozle 0.4 material: pla or petg cura quality standart: 0.2mm...

thingiverse

free

Replacement for Razer keyboard slotted key link by DemuxLabs

...is so tiny i had to use a 0.2mm noozle and 0.16mm layer height. piece printed cross-down, with minimal...

thingiverse

free

Customizable FAN by fvergniaud

...at random point 2-ooze prevention . it shake the noozle when translate to other point 3-z-lift elevate 0.1mm until...

thingiverse

free

Calibration cube (for adehesion / temperature) by italocjs

...remove it from the bed, and may damage the noozle, now we will check the temperature, if it was...

thingiverse

free

Semi circular fan duct for Tech2C E3D V6 X-carriage by Peter1280

...cases, caused the filament to cool down within the noozle at times when the fan was above 60%. and...

thingiverse

free

Dual E3Dv6 40mm fanduct - Modular x carriage Taralu - TEVO Tarantula by poire

...with a dual e3dv6 head.... first issue : the noozle can't reach the bed...my x axis is on mgn12h...

thingiverse

free

Latch hook - Haken mit Oese by DM4DS

...part is at a hight of ~10,5-10,7mm. then the noozle is over the hook but the hole is still...

thingiverse

free

CO2 aquarium reactor by leving

...surprised the print (2 perimeters, 4 top/bottom with 0.4mm noozle is airtight. further updates may...

thingiverse

free

Autolevel L3k Probe by fvergniaud

...most important part is to know the distance between noozle and the activation of the calibration probe, when you...

thingiverse

free

Anet A6 x-carriage with Tronxy / BLtouch Sensor Variable by motey1

...me. everytime i had to adjust the sensor to noozle height, i had to unscrew&screw the sensor, hope that...

thingiverse

free

ANET A8 relocating the Z probe to the right... by aeropic

...z-probe has an offset of around 40mm with the noozle and around 70mm with the x-axis. a small rotation...

thingiverse

free

ANET A8 Z-saver and X leveling tool (mechanical end stop) by aeropic

...release all the axis (motors off) manualy home the noozle to x min endstop rotating the two z threaded...

thingiverse

free

Anycubic I3 Mega Y Dual Extruder conversion by 3D_Rapid_de

...programm starten 5 start skript fährt t1 in die noozle und wieder zurück. 6 start skript fährt t0 in...

thingiverse

free

Bobina NTH Grilon3 Cajonera 3/4 Divisiones y sub divisiones - Spool Drawer 3/4 Divisions & Subdivisions for Grilon3 (ARGENTINA) by GOrtega

...altura interna de rollo: 59 se puede imprimir con noozle de 0.4 y 0.8 y hasta en espiral (vase...

thingiverse

free

ToyREP 3D Printer by thorgal

...clone for 1.75 pla or abs filament with 0.4mm noozle using very cheap 28byj-48 stepper motors (with bi-polar hack)...

grabcad

free

noozle??

...noozle?? grabcad this is a noozle?

grabcad

free

Noozle

...noozle grabcad for practice in mastercam software

grabcad

free

Cap Eva Noozle

...cap eva noozle grabcad cap eva noozle for jk machine filter

grabcad

free

CONVERGENT NOOZLE

...convergent noozle grabcad model with simuations setup

grabcad

free

CNC 6040 Noozle

...h for it, but it is beter to use coolant when cutting alluminium. it is for 2,2 kw spindle and vacum cleaner with 34-35mm noozle.

grabcad

free

LPG NOOZLE ELAFLEX ZVG 2 EURO

...lpg noozle elaflex zvg 2 euro grabcad lpg noozle for car refluelling

cg_trader

$7

Nozzle

...nozzle cg trader noozle is a part of dispenser on gas...

grabcad

free

Airbrush Repair Tool Kit

...airbrush repair tool kit grabcad to repair broken noozle and change the broken rubber seal. this is my...

cg_trader

$5

3D printable Coin from Gleipnir | 3D

...2 for 1:1 scale print you need 0.2 diamter noozle or the text will...

cg_trader

$8

Poddle Low Poly | 3D

...for sale in your store or decoration your house. noozle 0.4mm infill 20% speed 35mm/s abs or pla approximately...