168 drak 3d models found
Download or buy, then render or print from the shops or marketplaces.
3D Models below are suitable not only for printing but also for any
computer graphics like CG, VFX, Animation, or even CAD. You can print these 3d models on
your favorite 3d printer or render them with your preferred render engine.
Please note that the 3D model database is only a Search Engine. You should
visit the original websites. Most of the models can be easily imported and rendered
with Autodesk 3ds Max, Maya, Blender, C4D, and Sketchup. Check for online
3d model conversions tools for your file format.
Shown 1 of
2 pages
turbosquid
free
drak
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Ritewing Drak Parts
...ritewing drak parts
thingiverse
various parts i used on my big drak build
thingiverse
free
Drak esc scoop
...ingiverse
just adjusted the size of the original design in order to make it applicable to the component bay of the ritewing drak
thingiverse
free
Drak the Barbarian by NinjaMMA1
...n by ninjamma1
thingiverse
drak the barbarian is a gladiator in the arena. if you want to see more gladiators, please follow me.
thingiverse
free
mini drak esc clamp by clevis41
...mini drak esc clamp by clevis41
thingiverse
clamps for mini drak esc
thingiverse
free
Mini Drak wing tips by scottyh72
...mini drak wing tips by scottyh72
thingiverse
wing tip protectors for the ritewing mini drak.
thingiverse
free
Drak Saddle scoop
...drak saddle scoop
thingiverse
part one of a compartment scoop
thingiverse
free
Nano Drak wingtips
...nano drak wingtips
thingiverse
scaled version of the winglets by norcot.
thingiverse
free
Drak scoop cover latch
...drak scoop cover latch
thingiverse
thingiverse
free
FC mount for Mini Drak by curlypaul
...size flight controllers for mini drak
just a simple mount that tilts fc up 3.5°, which is what i measured the mini-drak bay to be
thingiverse
free
Ritewing mini Drak camera nose
...ritewing mini drak camera nose
thingiverse
camera nose for mini drak from ritewing. for foxeer legend2 and any fpv camera
thingiverse
free
Nano Drak nose for Runcam Hybrid
...o drak nose for runcam hybrid
thingiverse
nose/camera pod for the ritewing nano drak and a runcam hybrid camera. print with tpu.
thingiverse
free
Ritewing Mini Drak Screw Replacement by Skybandit
...ment screw for the ritewing mini drak and drak.
recommend printing in thin layers to make good threads. i use 0.1mm layer height.
thingiverse
free
Big Drak Crossfire diversity Receiver mount
...big drak crossfire diversity receiver mount
thingiverse
diversity crossfire antenna mount to fit in the bay of the ritewing drak
thingiverse
free
Ritewing Nano Drak Servo Locating Jig
...ritewing nano drak servo locating jig
thingiverse
easy and fast servo locating jig for ritewing nano drak
thingiverse
free
Mini Drak Aero Gopro Hero7 nose
...mini drak aero gopro hero7 nose
thingiverse
tpu nose for mini drak
for use with foxeer mini camera
thingiverse
free
Mini Drak Battery Cover by dwwnz
...wnz
thingiverse
this is my first cut for my mini drak battery cover. this includes the facility to mount a fpv/blue transmitter.
thingiverse
free
nano drak dji air unit nose
...nano drak dji air unit nose
thingiverse
dji fpv air unit and cam nose for ritewing nano drak .
thingiverse
free
Nano Drak Wing tips - Short wings
...nano drak wing tips - short wings
thingiverse
i made these wings tips for my nano drak short wings.
thingiverse
free
Drak-like prototype by chrl
... count cog and just to see it before making it from foam.
caution! vertical parts are really thin, and may break as on my photos.
thingiverse
free
Video transmitter bay cover for the Mini Drak by Kurbit
...video transmitter bay cover for the mini drak by kurbit
thingiverse
video transmitter bay cover for the mini drak
thingiverse
free
Mini Drak Snorkel Motor Mount by sstage
...rak snorkel motor mount by sstage
thingiverse
mini drak motor mount for 28 size motors. tested with tmotor at2820 and badass2820
thingiverse
free
Mini Drak uVector holder by robinbw
...
a better way of mounting a micro vector on a mini drak. you will need to print the two inserts which get hot melted into the epo
thingiverse
free
Ritewing Drak camera nose by Havardsa
...s a version for runcam2 and foxeer 1177, and a version for runcam2 and swift/eagle.
its not been printed and tested yet.
enjoy:-)
thingiverse
free
Mini Drak R/C receiver cover by Kurbit
...mini drak r/c receiver cover by kurbit
thingiverse
r/c receiver bay cover for the mini drak.
thingiverse
free
Skid for Mini Drak by Marthr
...t harpoon the ground on landing.
edit 19th jan 2018 : added a slightly longer skid. the angled upright is extended by about 10mm.
thingiverse
free
Mini Drak Hero6 mount by halfvg
... for the mini drak. i have not tested this idea. the design is still rough. based on the hc44 mount and the md session mount.
thingiverse
free
Nano Drak hatch cover
...thing:3824496
slightly beefier with a lower profile air scoop.
update 11/1/2019
added version to flush mount a brainfpv gps unit.
thingiverse
free
Nano Drak Tarsier Mount
... just cutting into with the template, installing with glue the base portion, then attaching the camera part with 20mm 3mm screws.
thingiverse
free
mini drak vector mount by ryan7700
...mini drak vector mount by ryan7700
thingiverse
test for vector and minidrak
thingiverse
free
Nano Drak Mix Mount
...nano drak mix mount
thingiverse
side by side fpv/foxeer mix mount i am working on.
thingiverse
free
Drak Mounting Plate for Gimball by jasonhyland
.... its a 2 part mount, the lower mount is glued in place with the upper blank plate screwed in (careful not to glue in top plate).
thingiverse
free
Ritewing Mini Drak Parts by IcarusFPV
...y build. a "dog bone" style wing joiner, the vertical stabilizer inserts, and skids for the coro, which need to update.
thingiverse
free
Nano Drak Aero motor mount by Oliin
...ysky 2212-2450
still testing for heat build up
inspired by this mount for the mini drakhttps://www.thingiverse.com/thing:4092957
thingiverse
free
Ritewing Mini Drak Vented Motor Mount -REMIX-NO SUPPORTS- by ECO9FPV
...g mini drak vented motor mount -remix-no supports- by eco9fpv
thingiverse
ritewing mini drak vented motor mount without supports
thingiverse
free
Mini Drak Motor Mount by curlypaul
...ed pet-g, at top end of recommended temp, to get it really strong
kept the stock aluminium mount motor side to help with any heat
thingiverse
free
Mini Drak Skid by zanthor
...es more organic, added glue swales in the bottom of it... ok, so there's not a lot to compare with such a simple part.
enjoy!
thingiverse
free
Mini Drak ESC Cover by MPoindexter
...mini drak esc cover by mpoindexter
thingiverse
work in progress. will model some front screw downs soon
thingiverse
free
Mini drak ESC holder by robinbw
...mini drak esc holder by robinbw
thingiverse
if you have bought the esc from ritewing then this will hold it in place
thingiverse
free
Mini Drak twin motor mod by appelm
...h as those that come with standard servos.
cross remix of defiant 28 twin motor mount https://www.thingiverse.com/thing:2844521
thingiverse
free
Daddy Drak Camera Nose by jasonhyland
...used 6 5x2mm magnets to stick from to back, but i also have a place to stick a band around it for some extra mechanical security!
thingiverse
free
the sexy Mini Drak Motor mount for BA28XX motors by npmullins
...8xx motors by npmullins
thingiverse
new 'sexy' motor mount for a mini drak which works with the badass 2814 sized motor.
thingiverse
free
Mini Drak Boom insert by wewin1
...mini drak boom insert by wewin1
thingiverse
lost one of the inserts in a crash so i decided to make a replacement.
thingiverse
free
Ritewing Mini Drak Ailerons by Kikerumbo
...e to glue, hollow with reinforcements and a 2mm "skin" and a 20mm solid square where the horns are going to be screwed.
thingiverse
free
Mini Drak Nose Cone by MPoindexter
...p into place. i plan to model some holes into a future revision to make it removable/replaceable and alternate nose cone options.
thingiverse
free
Nano Drak Micro Swift Cam holder
...nano drak micro swift cam holder
thingiverse
camera holder for the runcam micro swift.
thingiverse
free
Ritewing Mini Drak Hero 7 Gopro mount
...he ritewing mini drak
fpv cam is fitted internally! keeps it clean and protected
printed in tpu
camera is a foxeer mini size cam
thingiverse
free
Unify Pro32 HV Holder for Nano Drak
...tle. i removed the wall at the front to allow more airflow, and i sized up the posts on the back side (mine broke pretty easily).
thingiverse
free
Ritewing Drak Gopro nose by Havardsa
...ritewing drak gopro nose by havardsa
thingiverse
this one is for gopro 3/4 and foxeer 1177.
its never been printed or tested.
thingiverse
free
Ritewing Mini Drak LED Clamshell by zanthor
... so... in the end i settled on putting these pulsing led's under a clamshell that serves as a diffuser in front of the motor.
thingiverse
free
Mini Drak motor mount by mbamba
...mini drak motor mount by mbamba
thingiverse
md motor mount
printed mine in abs 100% infill. 80% probably good too.
thingiverse
free
Mini Drak L9R Lock Door Cover by loraerial
...mini drak l9r lock door cover by loraerial
thingiverse
this is a remix of https://www.thingiverse.com/thing:3275229
thingiverse
free
Mini Drak aero motormount for Brotherhobby T5 3115
...mini drak aero motormount for brotherhobby t5 3115
thingiverse
petg or abs 30-100% infill
thingiverse
free
Ritewing Nano Drak side bay covers
...at is cut into the foam and gooped, also there is a cutout for a magnet that can also be glued in to ensure closure of the cover.
thingiverse
free
Mini Drak ESC Shelf by Rosco18
...s to my servo connectors.
printed with 100% infill. this part is thin and flexible on purpose.
feel free to remix to your needs.
thingiverse
free
Ritewing Mini Drak Horns by EddiMaevski
... to m2x20 screws needed for fixation to elevons.
will be happy to modify or adjust if someone needs something else.
happy flying.
thingiverse
free
Ritewing Drak Hero 8 Runcam Eagle nose by banditfpv
...ritewing drak hero 8 runcam eagle nose by banditfpv
thingiverse
15% infill
tpu
supports on
thingiverse
free
Nano Drak DJI FPV nose mount
...hem more robust. also, its easier to place the antennas now without them popping out. must secure antennas though with zip tie.
thingiverse
free
Mini Drak ESC hatch cover by Oliin
...ni drak esc hatch cover by oliin
thingiverse
remixed to fit my skywalker 60a esc and added a naca duct shaped scoop for cooling
thingiverse
free
Mini Drak VTX/RX Bay Door by MPoindexter
...mini drak vtx/rx bay door by mpoindexter
thingiverse
screw it into place and use a heat gun to mold to the contour of the wing.
thingiverse
free
RiteWing mini Drak (parts collection) some are remixes by MeerkatFPV
...ritewing mini drak (parts collection) some are remixes by meerkatfpv
thingiverse
some are remixes ... some are done by myself
thingiverse
free
Ritewing Mini Drak Wing Tip Winglet by NorcoT
... do fit and look good :)
i printed in pla 3x perimeter and a 15% infill, printed unsupported with the root of the tip on the bed.
thingiverse
free
Nano Drak BN-220 GPS holder
...lder
thingiverse
this was designer to both hold the bn-220 gps puck and tidy up all the wiring going into the flight controller.
thingiverse
free
Mini Drak MPX Wing joiner by _SYCO_
...ome more pictures of them fitted shortly. if anyone wants a different gap size let me know and i'll upload some more options.
thingiverse
free
Ritewing Drak Badass / Cobra motor mount by JoshGFPVPrints
...ritewing drak badass / cobra motor mount by joshgfpvprints
thingiverse
4 shell layers
40-60% infill
abs - pla - petg etc
thingiverse
free
KO Method SWR Nano Drak & Ritewing Spec Mount by banditfpv
...ko method swr nano drak & ritewing spec mount by banditfpv
thingiverse
swr mount as above
thingiverse
free
Mini Drak aero motormount for 28XX series
...xx series
thingiverse
25-70mm (specified in the file name) lenght from edge to motor
hole for wires
petg or abs
30 - 100% infill
thingiverse
free
Nano Drak DJI 4mm extra back panel
...nano drak dji 4mm extra back panel
thingiverse
just extended the back panel area by 4mm in height so it would fit my cut of.
thingiverse
free
Mini Drak nose for DJI FPV air unit
...rak nose mount for dji hd fpv air unit. remixed from a mount for a runcam. secure with a little double stick tape and a zip tie.
thingiverse
free
nano drak dji fpv or vc400 nose mount
...ween the nose and mount. i use tape and hot glue to secure the dji transmitter. you can also use rubber bands between the skewers
thingiverse
free
RITEWING MINI DRAK BAY COVERS (HINGED IN PLACE) by EddiMaevski
...revisions tracking
26.08.2020 - initial release.
will be happy to modify or adjust if someone needs something else.
happy flying.
thingiverse
free
Ritewing Drak Caddx Vista GoPro Hero 5, 6, 7, 8, 9 Mount by ChristianMoe
...e
thingiverse
caddx vista mount for the big drak. you will need a ufl to sma connector. the cable length should be at least 10cm
thingiverse
free
Ritewing Drak GoPro Hero 7 nose aero mount
...ni cam mount & nano predator mount
--- choose corresponding filler pieces
--- template for cutting added, not tried it myself
thingiverse
free
Nano Drak o-ring wing joiners
...ners. for use with 33mm o-rings: https://www.amazon.com/gp/product/b07f352n27/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
Mini Drak - GoPro Hero 5 Black & Runcam Micro Swift Nose Cone by AIRBOZ
...
gopro hero 5 black & runcam micro swift nose cone for the mini drak. the cut is around 27mm from the end of the battery bay.
thingiverse
free
Mini / nano Drak wing joiner o ring (TPU)
...mini / nano drak wing joiner o ring (tpu)
thingiverse
print in tpu, saves needing an actual oring.
very snug fit and secure
thingiverse
free
Extended FPV nose for mini drak using spec wing mount by Habendanio
...ss to print after accident.
file to print is drak-ext-noset.stl
split print.
print nose using tpu.
sprint spec wing mount in pla.
thingiverse
free
mini drak ram air esc hood scoop by clevis41
...ni drak ram air esc hood scoop by clevis41
thingiverse
glue on hood scoop to push air into the esc bay. use acetone or shoe goop
thingiverse
free
Ritewing Mini Drak Servo Reducers
...dealer in your region.
for installation of the bms-390dmh into md small reducer was needed to account for different size, enjoy.
thingiverse
free
Ritewing Nano Drak XT60 Holder by steven0555
...om the flight controller. requires a passage to be cut out and this glued in place with uhu-por or goop/e6000. print standing up.
thingiverse
free
Ritewing Drak Aero nose blank & Nano cam by banditfpv
...lank & nano cam by banditfpv
thingiverse
caddx baby ratel mount is a tester, give me feedback!
tpu or filaments will be fine
thingiverse
free
Ritewing Drak DJI Osmo Action Nose mount by banditfpv
...nose mount by banditfpv
thingiverse
15% infill tpu
note this has been updated!!!!
online cad model for the osmo was not correct!
thingiverse
free
Ritewing Drak Gopro 9 nose by npmullins
... black, and a runcam swift
4 degrees of down angle on the gopro
printed in tpu,
2 outer layers
infill 25%
4 layers top and bottom
thingiverse
free
Drak nose cone - Gopro Hero 8 by appelm
...o hero 8 by appelm
thingiverse
remix to fit the gopro 8
i don't have a gopro 8 so that's just a printed blank in blue ;)
thingiverse
free
RiteWing Mini Drak Parts (cover and winglet insert) by Painless360
... hinge. print that one in abs or petg as pet will not be flexible enough for it.
sharing them in case someone else can use them!
thingiverse
free
Mini Drak DJI Nose
...eight: 0.15
in fill:25%
the plug is printed in tpu, just make it a little squishy, i use 5% infill with 2 shell using priline tpu
thingiverse
free
Mini Drak Battery Cover by Mattyra
...y print on painters tape (yeh shoot me)
bed at 70
head at 235
i have a infill of 10% too and have 3 layers on the top and bottom
thingiverse
free
Ritewing Mini Drak wing joiners by Havardsa
... to the fuselage. they are essentially hooks for o-rings.
zanthor reports that r-18 212 7/8id 1-1/8od, 1/8 section is a good fit.
thingiverse
free
Mini Drak FPV vTx Replacement Lid by Moggiex
...rd small 5.8ghz video transmitters, such as the eachine tx526.
note: i bevelled the rear edge so closing it the lid is easier :)
thingiverse
free
Mini Drak Cover with & without FrSky Antenna Mounts (X8R, L9R, S6R etc..) by Moggiex
...used is this one https://www.thingiverse.com/thing:757641 and it may work out easier to print separately, hence the two versions.
thingiverse
free
nano drak motor mount
...
there are two versions one with 4 holes to mount and another with just two holes take your pick on what will work for u better.
thingiverse
free
Mini Drak Vertical Stab Holder Front Spar by alex168
...c of the vertical stabilizers that later on slides on the carbon fiber rod.
created this because i lost a peace in a crash.
enjoy
thingiverse
free
Ritewing Drak wing joiners by Havardsa
...thick (section). diameter depends on how tight you want it. 1 7/8 outer diameter feels good to me. 1 3/4 is tighter. 2 is looser.
thingiverse
free
Tarsier Mount for Nano Drak by Guytranspo
...se and the cutting template from atron's design.
this is a solid mount that has worked great for me and given me no problems.
thingiverse
free
Ritewing Mini Drak GoPro Session and HS1177 Nose by NorcoT
...the gopro will stick out a few mm.
print with the nose pointing up and supports for the overhang at the gopro pocket (see photos)
thingiverse
free
Ritewing Drak - Camera Mount for FPV Camera and GoPro Session by loraerial
...aerial
thingiverse
this is a remix of https://www.thingiverse.com/thing:2214196
i added 2 holes so you can fix you gopro session
thingiverse
free
Ritewing Drak Aero HD Cam Nose GoPro DJI by JoshGFPVPrints
...opro dji by joshgfpvprints
thingiverse
2 shell layers
10-15% infill
tpu
all mounts use a foxeer mini cam unless stated otherwise
thingiverse
free
Mini Drak Air Ducts by claytonbakerjr
... the narrower 8mm tall one goes in the middle.
also pictured are the smaller ducts for the side bays, i will upload them shortly.
thingiverse
free
Nano Drak nose cut template by piterson
...ther two positions.
i have created a smaller version to fit the right-front corner and the back-center.
a m3-.50 nut is required.
thingiverse
free
KO Method XS 3220 Ritewing Mini Drak & others by JoshGFPVPrints
...fpvprints
thingiverse
4 shell layers
40-60% infill
abs - petg etc
strength is critical, please carefully qc your print quality!!
thingiverse
free
Nano Drak twin motor mount remix by appelm
...in motor https://www.thingiverse.com/thing:2844521 use cross mounts from that thing for brother hobby avenger or similar motors.
thingiverse
free
Ritewing Mini Drak camera nose by Havardsa
...www.thingiverse.com/billyd/about
thanks bill:-) awesome! also check out his design with cameras built completely in to the nose.
thingiverse
free
KO Method X / XS Ritewing Drak Motor Mount by JoshGFPVPrints
...4 shell layers
40-60% infill
abs - petg
strength is critical, please carefully qc your print.
usable at power levels over 10kw!
thingiverse
free
Nano Drak vented side bay hatches
...k. they can simply be taped/glued on, was just trying to keep the components easily accessible/find a use for these extra hinges.
thingiverse
free
mini drak ESC LID BRACE by clevis41
...it . https://www.thingiverse.com/thing:2637448https://www.thingiverse.com/thing:2642751https://www.thingiverse.com/thing:2650151
thingiverse
free
Ratewing Nano Drak Caddx Vista, Nebula pro by Antigravity41
.../everlastkam/
subscribe to instagram https://www.instagram.com/oleg_valkov_fpv/
facebook https://www.facebook.com/oleg.valkov.94/
thingiverse
free
Mini Drak Bolt-on Wing Joiner by billyd
...little force to wiggle them around with any wing joining method (this one, velcro or the o rings) which could result in more wag.
thingiverse
free
Mini Drak Extended Nose for FPV Camera and Runcam 2 - BETA VERSION by NorcoT
...rint bed. chamfers added to most of the design to avoid horizontal overhangs.
please feel free to test and feedback any findings.
thingiverse
free
Ritewing Mini Drak Vented Motor Mount
...d fantastic, so i am no happy to share
update
redesign vent supports, should print easy now
added m3 and m4 bolt hole sizes
enjoy
thingiverse
free
Drak DJI Air Unit by tonkajeep34
...ry nice and well thought out.
v2 changed the slot for the sd card and increased the area of the camera cable to fit under the au.
thingiverse
free
Nano Drak motor mount for BA23XX by npmullins
...otor closer to the cg so have a look at the 10mm in set version
3 outer layers
8 top layers
4 bottom layers
19% infill
used petg
thingiverse
free
2020 Christmas Ornament by Drak
...rnament
blank boy and girl ornament
make your own options:
blank base 2020 ornament
base 2020 ornament
boy head
girl head
dog
cat
thingiverse
free
Ritewing Drak GoPro 3/4 Nose by appelm
...g.
this is the charge cable that i’m using:https://hobbyking.com/en_us/super-slim-gopro-3-a-v-cable-and-power-lead-for-fpv.html
thingiverse
free
Nano Drak Gopro Hero 8 / Nano Predator Mount by robsloco
... as i did making it. please feel free to comment on what you think of any ideas for future advancements.
thank you happy printing
thingiverse
free
Ritewing Nano Drak Print Bundle by robsloco
...good amount.
once the glue has set up overnight you should be good to go with installing the new covers provided in this download
thingiverse
free
Mini Drak Motor Mount by Marthr
...the entire length of the mounting plate would be a compromise in the strength. i would consider making other versions if needed.
thingiverse
free
Mini Drak FPV - GOPRO Nose Cone by zanthor
... these prints would work with any tpu.
don't have a printer and still want one? i sell these at http://www.twistedquads.com
thingiverse
free
Ritewing Drak FPV - Session Nose Cone by zanthor
... these prints would work with any tpu.
don't have a printer and still want one? i sell these at http://www.twistedquads.com
thingiverse
free
Drak Nano Hero 7 - Micro Cam Nose v2
...icro cam housing.
flow 115%
speed 25-30
careful with your speeds.
*****this is a remix from ritewingnation
credit to that creator
thingiverse
free
Mini Drak Launch Hook by claytonbakerjr
...will conform to the shape of the surface it is being mounted to.
i scuff up the bottom of hook with sand paper prior to mounting.