3d_export

$50

monitor audio bronze

...ignature c-cam gold dome tweeter to give even sound dispersion, improved time alignment and wider directivity for lifelike sound.

thingiverse

free

Twitter Waveguide by stemura65

...twitter waveguide by stemura65 thingiverse waveguide for twitter

thingiverse

free

Waveguide Scanspeak R2604 by axlson

...tandard m4-screws. (m4x0.7 with tapered head of 32mm lenght) this is a remix from somasonus waveguides https://www.somasonus.net/

thingiverse

free

Waveguide LaVoce TN131.00 by axlson

.../www.somasonus.net/ added a version with 10mm thick faceplate to enable routing of adjacent driver and to make it a bit sturdier.

thingiverse

free

Monolith M570 Waveguide Mk. II by PockyG

.... 5mm total height vs 4mm. waveguide now covers mostly just the driver section to use less material and less earpad interference.

thingiverse

free

SB19ST Quadratic Throat Waveguide by bjaurelio

...as a little too tight. this will be a tad loose, but since its rectangular, you can twist the waveguide tight into the faceplate.

thingiverse

free

Waveguide Coax Adpater Customizer by rdklein

...giverse this is a customizable waveguide adapter. you can select from wr112 to wr28 standard flanges, its for sma type adapters.

thingiverse

free

Waveguide - Vifa XT25 by Shankenstein

... or home theater. i am in no way affiliated with sausalito audio or bang & olufsen. this design is not for commercial use.

thingiverse

free

BMS 4526HE Image Control Waveguide by Patrick_Bateman

...giverse this is a waveguide designed for the bms 4526he compression driver. it was designed with the ath software from diyaudio.

thingiverse

free

Tonsil tweeter waveguide modification by hopek1986

...custom modification for sb acoustics sb26stcn-c000-4. nozzle dia: 0,4mm, layer 0,2, support on. inner diameter 44mm, outer 143mm.

thingiverse

free

Tweeter Waveguide (Seas 27TDC)

.... this is to help diy speaker builder/ designers. the thickness is 25mm to help align the acoustic centers to a 5-7" woofer.

thingiverse

free

Monolith M570 Waveguide by PockyG

...adphones. i assume it'll work on any of the other variations of the sendy aiva. please give feedback if you do give it a try!

thingiverse

free

Waveguide Hornantenna Customziable by rdklein

...(or metal casted). attention: the customizer shows reversed face, the resulting stl works. openscad does not show this problem.

thingiverse

free

Woodpile photonic crystal with waveguide hole by scimax

...reat the structure as a crystal many lattice periods are required. the .itp files are parametrized to change the number of cells.

thingiverse

free

Slotted waveguide for TP-link WR703N by JelleBoomstra

...are limited by the lasercutter i used, an antenna with more slots would give a better gain. i have not tested this antenna yet...

thingiverse

free

8 to 12 GHz Horn antenna with Coax-Waveguide transducer by kodera2t

...connector attachment. (centre dielectric of sma must be elongated with covered by metal, and it should be inserted in the hole..)

thingiverse

free

Microwave oven mica waveguide cover plate for GE JE1860G, part # WB06X10162 by wseltzer2

... not in the pls software's material database. i tried using "mat board" and it cut perfectly. it was a lucky guess.

thingiverse

free

Linear Waveguide Based on 2D photonic band gap guidance by scimax

...essary and the present structure does not trap a propagating mode properly. the new design is not realized as a cad model so far.

thingiverse

free

X Band Waveguide Mount by IVIUPPET

...y results!! check out the 3d graph of a 1d scan of a simulated defect, showing what it looks like over a varying frequency range!

thingiverse

free

Deep Space Network Beam-Waveguide Station by ddThingz

...ping and waiting after it's been printed. as designed, it will unfortunately not print on a platform smaller than 8x8 inches.

thingiverse

free

Waveguide WG 188R für Visaton G 50 FFL by CptJackSparrow

...ther two positions. i have created a smaller version to fit the right-front corner and the back-center. a m3-.50 nut is required.

thingiverse

free

SAMH5 Long throw Speaker with Waveguide Phase Plug by Jazz0u

...ompression monacor ht30 faital 5fe100 (80w rms) 125-5000hz à -3db (avec absorbant) 1u : 88,7db à 1w/1m, 107,7db spl (113,7db max)

thingiverse

free

"Waveguide" Bedside Reading Lamp cnc by ZenziWerken

...d that the stl is for viewing purpose only. it will not print! visit https://www.zenziwerken.de/en/ for more interesting designs.

thingiverse

free

Customizable Cassegrain Dish by drxenocide

...veguide, and use it in photo-communications projects. bonus points if you mod one of your home entertainment systems to use this!

thingiverse

free

Peleton Passive Phonics by tsmarsh

...e for some reason, the speakers on the mk1 peloton point away from the rider. this waveguide guides the sound towards the rider.

thingiverse

free

STAX SR5 faceplate/grill by Rubinator9000

...a bit and made to fit 60mm id pads. v3 is up. it has been redesigned to fit the waveguide into 55mm id pads, eg. brainwavz large.

thingiverse

free

Wave Guide for Tweeter by DasBasti

...p://www.diyaudio.com/forums/group-buys/264286-waveguide-suit-peerless-hds-scan-speak-d2608-91300-a.html print it, fit it, buy it.

thingiverse

free

DC5GY-Feed POTY Adapter by 4ta

.... the used lnb holder is for kathrein dish and bought here:https://www.amazon.de/dp/b0052auu6w/ref=cm_sw_em_r_mt_dp_j4-pfb763p460

thingiverse

free

ScanSpeak R2604 adapter for Visaton WG148R by axlson

...by original front plate screws, and to the waveguide by m4x10 tapered head screws. recommend to print frontside towards printbed.

thingiverse

free

Mini MAS DNP NMR Spectrometer by fperras

...not require supports. i printed it on an 80% scale. the probe is held up in the bore of the magnet by the end of the waveguide.

thingiverse

free

Hexibox - MOD - 205x205mm by HDRI

...scuffing i noticed during testing. thanks to hexibase - i appreciate your design work, the excellent videos and thorough wording.

thingiverse

free

8 GHz dual mode feed by SV1CAL

...n 3db and measured isolation better than 25db. if you build one, please let me know how it goes ! 73 de sv1cal michael sv1cal.com

thingiverse

free

Night-Light for the Sony PRS-505 eBook Reader by syvwlch

... part and the reader's faceplate) to illuminate the beveled corners of the transparent part, which should become a waveguide.

thingiverse

free

HomeWheatley ( HomePod mini Wheatley Portal 2 Theme / Cover ) by ViperGtr

...can "float" in the air or so. because the whole model doesn`t fit on my photon, i splittetd everything in four pieces.

thingiverse

free

Smaller Speaker Cabinet by swirlingbrain

...he front bezel should be the same fit. it basically shaves off a couple of inches, that's all. i haven't printed it yet.

thingiverse

free

HomeWheatley ( HomePod mini Wheatley Portal 2 Theme / Cover ) by ViperGtr

...can "float" in the air or so. because the whole model doesn`t fit on my photon, i splittetd everything in four pieces.

thingiverse

free

Smaller Speaker Cabinet 3 inch by swirlingbrain

... 12v may fix that). anyway, the first cabinet sounds good so i'll probably enjoy it for a while before trying to go further.

thingiverse

free

Speaker Adaptor Plate for a 2007 Ford F150 by Robot143

...ock-nuts on the back side of the mount for the speakers. (if the screws loosen too much over time, then i will make the changes.)

thingiverse

free

Laser Engraver Picatinny Mount by IVIUPPET

...hine. also included intermediate version without the nut retainers in case they change what nuts are used. mine were m5 hardware.

thingiverse

free

EXPERIMENTAL MetaMaterial EM / Radio / Microwave Lens by Davros66

... for a microwave oven, this way.... heck, it's a lens for em radiation... i'm pretty sure you can think of a use for it!

thingiverse

free

Dielectric Test Cavity for 3D Printing Filament by lesagegp

...s too low for our purpose. we ordered specially formulated filament from premix which has a published dielectric constant of 4.4.

grabcad

free

waveguide

...waveguide grabcad instalation waveguide and hand clift

grabcad

free

Dehidrator for fresh machine to waveguide

...dehidrator for fresh machine to waveguide grabcad dehidrator for fresh machine to waveguide

grabcad

free

Waveguide to Coaxial Adapter

...waveguide to coaxial adapter grabcad waveguide to coaxial adapter part no: hd-100wcaskpa freq: 8.2-12.4ghz s/n: 212169010004

grabcad

free

Waveguide Choke Flanges

...waveguide choke flanges grabcad per mil-f-3922, provides waveguide flanges for multiple wr types. numbers are from the mil spec

grabcad

free

Waveguide WR-75 twist 3"

...waveguide wr-75 twist 3" grabcad waveguide flange wr-75 twist 3 inch

grabcad

free

Waveguide switch WR-75 Ku-band

...waveguide switch wr-75 ku-band grabcad waveguide switch wr-75

grabcad

free

WR-10 Magic Tee Waveguide

...wr-10 magic tee waveguide grabcad size wr-10 microwave radio waveguide magic tee radar component

grabcad

free

Waveguide Flange Types / Фланцы СВЧ техники

...lange types / фланцы свч техники grabcad rectangular waveguide flanges пополняемый перечень фланцев с/без канавки для уплотнения

grabcad

free

Test of a deep ultraviolet LED with aluminum water waveguide.

...t of a deep ultraviolet led with aluminum water waveguide. grabcad test of a deep ultraviolet led with aluminum water waveguide.

grabcad

free

Neo3 Tweeter Waveguide - 02

...om a 2004 neo3 pdr tweeter. motivated by this thread: https://www.diyaudio.com/community/threads/bg-neo-3-fr-optimization.310422/

grabcad

free

Neo3 Tweeter Waveguide - 01

...red width of a 2004 neo3 pdr tweeter. the height of the windows in the image is quite a bit larger than the 2004 tweeter however.

grabcad

free

Fairview Microwave 58 to 62 GHz Omni-Directional Waveguide Antenna with WR-15 waveguide (+3.5 dbi gain)

...ink to the antenna is here : https://www.fairviewmicrowave.com/wr-15-waveguide-standard-gain-horn-3.5-dbi-ug-385-fmwan1087-p.aspx

grabcad

free

Tweeter Waveguide - 5in / 12cm

...l life and is simply a tangent surface going from a circle to a square. model units are inch. newer version uploaded 03/31/2018

grabcad

free

UG387/U Waveguide iPart Generator

...rovided for personal use without additional permission. as always ♡'s and comments are appreciated, hope you enjoy my models!

grabcad

free

Fairview Microwave 55 to 65 GHz Wide Angle Scalar Feed Horn Waveguide Antenna with WR-15 waveguide (+10 dbi gain)

...and). here's the link : https://www.fairviewmicrowave.com/wr-15-waveguide-standard-gain-horn-10-dbi-ug-385-fmwan1069-p.aspx

grabcad

free

Eighteensound XG-14 Waveguide

... with the internal fins accuracy but the physical outer dimensions are correct if you plan on placing it in a loudspeaker design.

grabcad

free

Fairview Microwave 58 to 63 GHz Horn Antenna with WR-15 waveguide (+0 db gain) but 360 degrees beamwidth

...ns. the link to the antenna is here : https://www.fairviewmicrowave.com/wr-15-waveguide-horn-58-63-ghz-0-ug-387-sant-2010-p.aspx

grabcad

free

Fairview Microwave 50 to 75 GHz Horn Antenna with WR-15 waveguide (+25 db gain)

...h the datasheet is here : https://www.fairviewmicrowave.com/wr-15-waveguide-standard-gain-horn-25-dbi-ug-385-mod-fmwan1012-p.aspx

grabcad

free

Fairview Microwave 33 to 50 GHz Horn Antenna with WR-22 waveguide (+23 db gain)

...egrees at 3 db. here's the link : https://www.fairviewmicrowave.com/wr-22-waveguide-horn-33-50-ghz-23-ug-383-sh122-23-p.aspx

grabcad

free

Wurth / Rosenberger SMA 4-hole Flange Waveguide 18 GHz connector

...g of this connector at 18 ghz (-3 db) with a length of 1.67 cm (full wavelength). note this does not include material thickness !

grabcad

free

Fairview Microwave 58 to 68 GHz Conical Horn Antenna with WR-15 waveguide (+25 dbi gain)

...and). here's the link : https://www.fairviewmicrowave.com/wr-15-waveguide-standard-gain-horn-25-dbi-ug-385-fmwan1040-p.aspx

grabcad

free

Wurth / Rosenberger SMA 2-hole Flange Waveguide 18 GHz connector

...g of this connector at 18 ghz (-3 db) with a length of 1.67 cm (full wavelength). note this does not include material thickness !

grabcad

free

WR75 Quick Disconnect-Connect

...wr75 quick disconnect-connect grabcad быстроразъемный волновод schnellwechsler waveguide quick coupler waveguide

grabcad

free

Band WR 340

...band wr 340 grabcad for use waveguide in elt

grabcad

free

WG148

...wg148 grabcad visaton waveguide wg148. just for designing purposes, sizes are acurate but not detailed.

grabcad

free

Parabolic antenna

...parabolic antenna with horn emitter. with waveguide communication line. wavelength: 5 cm +-5%; beamwidth: 6 degree; gain: 30.3 db

grabcad

free

Flexible coupling

...angular movement between the axes of two waveguides. a coupling used to connect two shafts and to accommodate their misalignment.

grabcad

free

Pasternack 1 GHz to 18 GHz Broadband Horn Antenna

...e from fairview microwave : https://www.fairviewmicrowave.com/waveguide-horn-broadband-band-antenna-11-db-n-female-sh0118n-p.aspx

grabcad

free

Pasternack 1 GHz to 18 GHz (L, S, C, X, and Ka bands) Broadband Horn Antenna

...e from fairview microwave : https://www.fairviewmicrowave.com/waveguide-horn-broadband-band-antenna-11-db-n-female-sh0118n-p.aspx

grabcad

free

Sage Millimeter Cassegrain Parabolic Dish Antenna for 94 GHz (W Band) = mmWave

...erence (https://www.sagemillimeter.com/45-dbi-gain-92-to-96-ghz-12-reflector-diameter-wr-10-waveguide-w-band-cassegrain-antenna/)

grabcad

free

Sage Millimeter Cassegrain Parabolic mmWave 94 GHz (W Band) Antenna

...erence (https://www.sagemillimeter.com/45-dbi-gain-92-to-96-ghz-12-reflector-diameter-wr-10-waveguide-w-band-cassegrain-antenna/)

grabcad

free

WLAN Band Rejection UWB Microstrip PCB Antenna

...aper titled "coplanar waveguide-fed ultra-wideband planar antenna with wlan-band rejection" by a. subbarao, s. raghavan

grabcad

free

Pasternack 1 GHz to 18 GHz (L, S, C, X, and Ku bands) Broadband Horn Antenna

...e from fairview microwave : https://www.fairviewmicrowave.com/waveguide-horn-broadband-band-antenna-11-db-n-female-sh0118n-p.aspx

grabcad

free

Hexagonal Slot with WLAN Band Rejection UWB Monopole PCB Antenna

...quot;a coplanar waveguide-fed ultra wideband hexagonal slot antenna with wlan band rejection" by tapan mandal , santanu das

grabcad

free

Rosenberger 2.92 mm 2-hole Bulkhead 40 GHz connector

... bandwidth. the link is here ; https://products.rosenberger.com/radio-frequency/connectors/319423/02k721-40ms3-straight-jack-pcb

grabcad

free

Rosenberger 2.92 mm 2-hole Flange 40 GHz connector

... bandwidth. the link is here ; https://products.rosenberger.com/radio-frequency/connectors/319423/02k721-40ms3-straight-jack-pcb

grabcad

free

Rosenberger 2.92 mm 4-hole Bulkhead 40 GHz connector

...er bandwidth. the link is here ; https://products.rosenberger.com/radio-frequency/connectors/148884/02k421-800s3-panel-jack?c=11

grabcad

free

Rosenberger SMA 4-hole Bulkhead 18 GHz connector

...cy bandwidth. the link is here ; https://products.rosenberger.com/radio-frequency/connectors/105829/32k421-200e3-panel-jack?c=21

grabcad

free

Rosenberger SMA 4-hole Flange 18 GHz connector

...cy bandwidth. the link is here ; https://products.rosenberger.com/radio-frequency/connectors/105829/32k421-200e3-panel-jack?c=21

grabcad

free

Rosenberger 2.92 mm 4-hole Flange 40 GHz connector

...ge connector. the link is here ; https://products.rosenberger.com/radio-frequency/connectors/148884/02k421-800s3-panel-jack?c=11

grabcad

free

NSI-MI Technologies 2 ~ 18 Ghz Broadband Horn Antenna (BHA) with 15 dBi gain

... upon the familiar vivaldi waveguide. this is the link : https://www.nsi-mi.com/products/antenna-products/broadband-horn-antenna

grabcad

free

2 to 8 GHz (S-band thru C-band) Dual Ridged Horn 3D-Printed Broadband Antenna

...as a broadband antenna, it may be better off as a very high gain directional bluetooth antenna, especially for ble applications !

grabcad

free

STAX SR5 faceplate/grill replacement

...interchangeable. if you have any thoughts on updates to the design let me know in the comments. this will be a work in progress.

grabcad

free

'Megalodon' Bluetooth Horizontally-Corrugated Horn Antenna

...idge horn antenna with elliptically shaped sidewalls for use as a reflector feed for radio astronomy" by ockert botha jacobs

grabcad

free

Rosenberger N-Type 11 GHz Coaxial 17.5mm 4-Hole Flange Connector

...or is useful for waveguides and horn antennas where the center conductor is cut to a 1/4 wavelength of the frequency of interest.

grabcad

free

Amphenol 4 GHz BNC Coaxial 17.5mm 4-Hole Flange Connector

... antennas where the center conductor is used to solder on a 1/4 wavelength radiator active element for the frequency of interest.

grabcad

free

6 ~ 18 GHz Ultra Wideband (UWB) Phased Array Antenna

...re recesses to match the connectors, and i have used transparent plastic wherein the model shows an opaque material for the lens.

grabcad

free

EMC Shielding room - Zetros

...ons. entirely depending on the application and the needed attenuation at a certain frequency, we can recommend the right product.

grabcad

free

Rosenberger N-Type 11 GHz Coaxial 17.5mm 4-Hole Flange Connector

...g of this connector at 11 ghz (-3 db) with a length of 1.67 cm (full wavelength). note this does not include material thickness !

grabcad

free

6 ~ 18 GHz Ultra WideBand (UWB) Phased Array Antenna (C, X, and Ka-Bands)

...re recesses to match the connectors, and i have used transparent plastic wherein the model shows an opaque material for the lens.

grabcad

free

Amp / TE Connectivity N-Type 11 GHz Coaxial 1" 4-Hole Flange Connector

...heet metal patch of the frequency of interest. it can also be used to bridge into a pcb where the angle is not directly across.

grabcad

free

Amp / TE Connectivity N-Type 11 GHz Coaxial 1" (25.4 mm) 4-Hole Flange Connector

...heet metal patch of the frequency of interest. it can also be used to bridge into a pcb where the angle is not directly across.

grabcad

free

Amphenol 11 GHz TNC Coaxial 12.7mm 4-Hole Flange Connector

...g of this connector at 11 ghz (-3 db) with a length of 1.67 cm (full wavelength). note this does not include material thickness !

grabcad

free

Ku-Band 3D Printed Corrugated Horn Antenna

...vestigated with different conductive paints and thicknesses as well. note : the sma male to n-type female adapter is not shown !

grabcad

free

Amp / TE Connectivity N-Type 11 GHz Coaxial 1" 4-Hole Flange Connector

...g of this connector at 11 ghz (-3 db) with a length of 1.67 cm (full wavelength). note this does not include material thickness !

grabcad

free

Amphenol 11 GHz TNC Coaxial 17.5mm 4-Hole Flange Connector

... antennas where the center conductor is used to solder on a 1/4 wavelength radiator active element for the frequency of interest.

grabcad

free

Amphenol 11 GHz TNC Coaxial 17.5mm 4-Hole Flange Connector

...g of this connector at 11 ghz (-3 db) with a length of 1.67 cm (full wavelength). note this does not include material thickness !

grabcad

free

Vertically Polarized Moxon Switched Array 'Tunstile' Antenna

...s minimal, however the need for bulk capacitance on the switch boards is recommended to provide signal stability for the mosfets.

grabcad

free

Vertically Polarized Moxon Switched Array 'Turnstile' Antenna

...little current required to set the switches into various modes. sustaining current is minimal, however the need for bulk capac...

3dwarehouse

free

waveguide

...waveguide 3dwarehouse waveguide for driver

3dwarehouse

free

waveguide

...waveguide 3dwarehouse model of waveguide for microwave #high_frequency #microwave #wave #waveguide #波导

3dwarehouse

free

Si waveguide

...si waveguide 3dwarehouse si waveguide for optical transmission #waveguide

3dwarehouse

free

waveguides

...waveguides 3dwarehouse

3dwarehouse

free

Multimode Interference (MMI) waveguide

...multimode interference (mmi) waveguide 3dwarehouse polymer multimode interference waveguide on wafer #polymer #waveguide

3dwarehouse

free

silicon photonic waveguide with fiber

...silicon photonic waveguide with fiber 3dwarehouse silicon photonic waveguide with fiber

3dwarehouse

free

Tonsil ZG30C114 waveguide, tuba

...tonsil zg30c114 waveguide, tuba 3dwarehouse tuba, waveguide do kolumn unitra tonsil zg30c114

3dwarehouse

free

4x10 waveguide

...4x10 waveguide 3dwarehouse made specifically for bass rockers brch8 with a single ds18 pro-dr1p driver

3dwarehouse

free

Tweeter Waveguide based on Tonsil

...tweeter waveguide based on tonsil 3dwarehouse

3dwarehouse

free

4-Wege-Horn-PA

...rehouse 1,4'-komperssionstreiber an waveguide, 10' an waveguide, 15'-bandpasshorn-kickfill, 15'-bandpasshorn-lfe

3dwarehouse

free

Dynacord F12CWH

...dynacord f12cwh 3dwarehouse conical waveguide horn

3dwarehouse

free

Dynacord F17PWH

...dynacord f17pwh 3dwarehouse 18' planar waveguide horn

3dwarehouse

free

Tower Speakers

...tower speakers 3dwarehouse dual 7inch and dome tweeter in waveguide

3dwarehouse

free

Stereo two way speaker

...omponent list , crossover design, and comments available @ http://www.diyaudio.com/forums/multi-way/158512-waveguide-za-sr71.html

3dwarehouse

free

Two way speakers on stands

...omponent list , crossover design, and comments available @ http://www.diyaudio.com/forums/multi-way/158512-waveguide-za-sr71.html

3dwarehouse

free

Falowód mikrofalowy prostokątny.

...y prostokątny. 3dwarehouse falowód mikrofalowy prostokątny. #falowód #microwave #mikrofale #mikrofalowy #waveguide #wellenleiter

3dwarehouse

free

Seos 12 Vifa TC9

...seos 12 vifa tc9 3dwarehouse seos 12 with 8 x tc9 mids #cardoid #controlled_directivity #horn #seos #vifa #waveguide

3dwarehouse

free

JBL Line Array

... array 3dwarehouse jbl vrx-928la constant curvature waveguide 8' two way line array loudspeaker system #jbl #line_array #vrx

3dwarehouse

free

Procella P6 Loudspeaker

.... #65 #compression_driver #home_cinema #home_theater #loudspeaker #p6 #procella #procella_audio #professional #speaker #waveguide

3dwarehouse

free

Jefferies tube USS Enterprise D

... access to utilities trunks and circuitry. #enterprise #jefferies #jefferies_tubes #star #star_trek #trek #tube #uss_enterprise_d