thingiverse

free

RacerStar ESC cratle by DaveThing2016

...racerstar esc cratle by davething2016 thingiverse this is a ziptie housing for a 20a racerstar esc

thingiverse

free

XT60H - Racerstar TaiChi AIO

...xt60h - racerstar taichi aio thingiverse racerstar taichi aio - create case for xt60h with condo uf .

thingiverse

free

Realacc X210 racerstar wrenches by jgbbob8

...realacc x210 racerstar wrenches by jgbbob8 thingiverse set of wrenches for the racerstar racing edition brushless motors

thingiverse

free

Racerstar MS25 BLHeli_S Protector by Petsku

...y petsku thingiverse protector for racerstar ms25. wide version is for emax legs and narrow is for zmr. no cover for the narrow.

thingiverse

free

Racerstar RS35A V2 cover by KostyaIgnatov

... v2 cover by kostyaignatov thingiverse cover for ecs racerstar. placing on the table https://www.youtube.com/watch?v=_gkcb1-rywk

thingiverse

free

RacerStar RS20A lite esc protection by Alex18881

...racerstar rs20a lite esc protection by alex18881 thingiverse racerstar escs protection for realac 215 purple frame.

thingiverse

free

Racerstar 2306 Motor Wrench by Simongotnews

...racerstar 2306 motor wrench by simongotnews thingiverse .

thingiverse

free

RACERSTAR 4IN1 30A BUMPER FOR QUADCOPTER by giek2000

...er by giek2000 thingiverse this is a little bumper for a diy quad made with a racerstar 30a 4in1 esc. has 30.5mm mounting holes.

thingiverse

free

Racerstar 28A esc cover by smokingbryan

...on and works fine, just made the walls thicker in this version to allow for greater infill. printed flat, but print how you like!

thingiverse

free

Rc-tank gear for racerstar 2212 motor by nilsson618

...618 thingiverse the gears are for https://www.thingiverse.com/thing:2414983 to use with racerstar 2212 motors and m6 nylock nut.

thingiverse

free

Racerstar Tattoo F4S by sperberframes

...tion based on counting pixels, but it should be good enough to know if the board fits in your build.shameless plug for my website

thingiverse

free

RC car Racerstar 120A brushless ESC Holder by Shoyun

...cerstar 120a brushless esc holder by shoyun thingiverse an esc holder for rc cars. perfect fit for racerstar 120a brushless esc.

thingiverse

free

Dork Fish racerstar 1103 frame by btnewman

...ere is a 100mm version for 65mm props, and 91mm version for 56mm props. has mounts for 20x20 flight controllers and 4 in 1 escs.

thingiverse

free

Racerstar 2300KV nose motor Mount for Aircraft by fureter

...ics, and transitions to 5cm width, 6 cm height where it connects to the fuselage. the screw holes are m3 to connect to the motor.

thingiverse

free

AK 185-214 Protector Racerstar tattoo-s 35A (Esc cover) by skydge

...ak 185-214 protector racerstar tattoo-s 35a (esc cover) by skydge thingiverse protector para esc racerstar tattoo-s 35a

thingiverse

free

RacerStar Star F4S AIO Wire Guide by f4ichuck

...s on the solder joints. racerstar star f4s review: https://youtu.be/pwk0b-jfap4 build details: https://rotorbuilds.com/build/8743

thingiverse

free

racerstar 1103 softmount pads by btnewman

...t;soft mount" the racerstar 1103 motors. these are meant for the original rs1103 motors with an 8.5mm x 1.6mm mount pattern.

thingiverse

free

ESC PROTECTOR (racerstar 30a v2) by Oscarem296

...t protect in my opinion), and the best one that is the one designed with hexagons. let me a like if you like this design, thanks.

thingiverse

free

Remo SMAX mount for 35A RACERSTAR brushless ESC by TheDIYGuy999

...de a remo hobby smax. the capacitors and the main switch can also be attached. video: https://www.youtube.com/watch?v=le_zhxloqb4

thingiverse

free

Racerstar BR1103 8000kV Brushless Motor (for design purposes) by maxdefeijter

.... i created it for myself to help design frames and make nice-looking renders, but many asked if i could post it, so here it is.

thingiverse

free

Patin+protection Esc Made pour Racerstar tattou 30A blheli 32 by AtomX

... d’atterrissage. pour "verouiller" le support un tour de scotch d'électricien fera parfaitement l'affaire :) :b

thingiverse

free

Mavic Pro Prop Adapter for 2212 RacerStar Motor w/ 6mm shaft by LKCreates_LayerOne

...- i'll be returning w/ a newer version or an update to indicate if this one works in flight or needs another design revision.

thingiverse

free

Racerstar F405 wing nano 20x20 to 30.5x30.5 mount adapter with damping balls by hyperion1

...nt for stock adapter which was too bad used with m3 damping ballshttp://ali.pub/5gfk1ehttps://www.youtube.com/watch?v=u71hto91ukq

thingiverse

free

Cover/shield for Racerstar RS30AL Blheli_S ESC with RGB LED by DiAleksi

... designed for 17,5mm wide esc and the hole for on board rgb led. a bit ugly for obsession and need redesigning. still functional.

thingiverse

free

qx90 brushed to brushless by karnaugh

...10000kv motor racerstar 6a racerstar 2035 4 blades prop ac800 receiver qx90 aio vtx 300mah 2s auw = 72.3grams flight time = 3mins

thingiverse

free

2306S by roman54

...2306s by roman54 thingiverse защита для моторов racerstar br2306s

thingiverse

free

Anti-lost circlip cap realacc x210 BANGGOOD racerstar motor by julian_fender

... cap i scale it to 98% to fit the frame correctly in pla but it will depend on the settings of your printer luck and good flights

thingiverse

free

ESC Protector by ntthhtl

...esc protector by ntthhtl thingiverse fits xm20 size esc, racerstar ms25a etc..

thingiverse

free

PepperFish frame by CoenenDaan

...coenendaan thingiverse this is a redisign of the pepperfish frame. 2mm thick. uses the standerd screws for the racerstar motors.

thingiverse

free

HeQuad94 Micro Brushless FPV HomeRacer by FPV_AirRacer

...camera/vtx: eachine turbine https://is.gd/qiftog rx: frsky xm+ https://is.gd/nfatlq material: bottom-plate: pla camera-mount: tpu

thingiverse

free

BR3508 Motor Caps

...br3508 motor caps thingiverse i designed these caps to fit my racerstar br3508 motors to protect them for transport.

thingiverse

free

Drone VTX-FC Stack spacer by siderits

...drone vtx-fc stack spacer by siderits thingiverse stack spacer for vtx-racerstar f4 aio flight controller.

thingiverse

free

HTD 5M 15T 18w 10mm Bore by Ikcognito

...htd 5m 15t 18w 10mm bore by ikcognito thingiverse htd 5m pulley for a racerstar 6368 brh6368 brushless motor from banggood.

thingiverse

free

Homie X95 by LHardy

...homie x95 by lhardy thingiverse homie x95 setup: piko blx fc, racerstar 12a, 1103 8000kv motor , eachine tx03 rotorx2535 props

thingiverse

free

RC Receiver mount for racing quad by evnngsky

...acing quad by evnngsky thingiverse c to c 30mm * 30mm for regular size racing flight controller, especially, a racerstar starf4s

thingiverse

free

ESC Protector for RealAcc X210 by Romout

... x210 by romout thingiverse simple protector for my escs. fits quite well on the racerstars 30a lite escs. pictures will follow.

thingiverse

free

Foxeer Arrow Pro micro to frogracing adapter by CoenenDaan

...f4s racerstar rb2306s 2700kv foxeer arrow pro micro tbs unify hv frsky xsr 3d printed top plate fatshark attitude v4 taranis q x7

thingiverse

free

Micro quad with 16x16mm flight controller by ptgraham

..., and props are 2435 60mm 4 blade racerstar props. not a ton of power, but i get about 3 minutes fpv flight and is super quiet.

thingiverse

free

TinyFix 0703 quadcopter by crysis_ps

...tar star4 4a 1s blheli_s esc racerstar 0703 br0703 15000kv motors hubsan 3-leaf propellers turnigy nanotech 300mah 45-90c battery

thingiverse

free

Soft mount motor by Zupo

...hingiverse soft mount motor designed for airb 2514 kv1498 motor from racerstar. must be printed in ptu or any flexible filament.

thingiverse

free

1106 motor by lustig1374

...el based off the racerstar br1106. good enough for mounting on your frame to check for prop compatibility, but lacking in thrust.

thingiverse

free

TransTec frog top plate by CoenenDaan

...rsky x4r-sb recever -immersionrc tramp hv -piggy osd -foxer hs1177 v2 cam -infinity 1300mah 4s -taranis qx7 -fatshark attitude v4

thingiverse

free

BLR - OVNI - 90mm X frame by blistovmhz

...s-i6x, racerstar 1103b 8000kv and a micro beeper. all stuffed into the blr tx04 mount 20x20 stack for m3 screws. fits 20xx props.

thingiverse

free

Mini Soft mount TPU 1mm Brushless 1103 by Microdure

...r-racing-edition-1103-br1103-10000kv-1-2s-brushless-motor-for-100-120-150-rc- multirotor-p-1110306.html? p = ld020411878172015024

thingiverse

free

Mini montage souple TPU 1mm sans balais 0703 by Microdure

...erstar-racing-edition-0703-br0703-10000kv-1-2s-brushless-motor-for-6080100mm-fpv-racer-1_9g-p-1129234.html?p=ld020411878172015024

thingiverse

free

Brushless MicroQuadie by MiguelDK

...erstar br1103 motors. for durability; print the frame in polymaker polymax pla. features: -motor protectors -hidden motor wiring

thingiverse

free

LBJ110 by LeBraddockJames

...to 66mm, uses the racerstar 1103 10000kv, tx01 and designed to use the emax f3 fetmo fc. use nylon m3 hardware to secure the top.

thingiverse

free

Prop Box for 2030 4 Blade Propellers by BadaBoom

...hey are just perfect! where to buy the props:10 pairs racerstar 2035 (affiliate link)10 pairs racerstar 2035 (non-affiliate link)

thingiverse

free

Addons for E-90X frame, TX01 camera and Piko BLX FC by slibbinas

...x01 esc racerstar 6a, 1,2s here is full set of addons to adopt the blx, tx01, led strip etc. copter without battery weights 46gr.

thingiverse

free

Quadcopter motor dampener by mfazio_science

...brations of the motor (hopefully, this is a test) used with racerstar 2205 2300kv motor (16mm and 19mm diameter mounting bracket)

thingiverse

free

RIAC105 for 16x16 TinyKwad by jakewells

....banggood.com/10-pairs-kingkong-55mm-blade-propeller-prop-for-eachine-qx90-qx95-diy-micro-quadcopter-p-1126498.html?rmmds=myorder

thingiverse

free

Brushless 95mm Martian Micro FPV Quadcopter by arkngelus

... with screw holes for the racerstar 1103 motors added a second mod for piko blx 20x20 holes update 02/18/2017 fixed 20x20 spacing

thingiverse

free

Prop guard for nano BL frame and 47mm DYS 2030 props by 22vlalesflics

...f the propguard for 87mm armattan pershing 87mm frame fits with 47mm dys (2030) props fits with br1103 racerstar brushless motors

thingiverse

free

Aurora motor guard by Funfly

...5g engine protection for the original aurora 100 used racerstar 1103b 8000kv engines material pla infil 20% perimeters 3 brim 5mm

thingiverse

free

PocketQuad by CJA3D

... minute soldering and includes a lot of moving components which are tiny so you will have to muster up the courage and patience !

thingiverse

free

ESC housing by MrPurple

...out 1-2g. needs no support if you want a nice and clean finish of the top, you can also flip it around and print it with support.

thingiverse

free

Brushless whoop! 0703&1103 motors by Yannicflight

...ve fun! update tracklog: v1.0 initial release v1.1 changed the 0703 frames mounts to fit both racerstar and sunnysky 0703 motors.

thingiverse

free

Mito210 esc cover by smokingbryan

...s i chose for this build were a little bit wider than the arms. so these will protect them while still fitting the arms tightly.

thingiverse

free

Tattoo 210 quadcopter frame by kolovitz

...0. electronic that fit in this frame : runcam micro vtx03 eachine racerstarf3 aio or racerstar tattoo f4. using 1806 emax motors.

thingiverse

free

Boinker 104 by Ebolompedo

... 7000kv furiousfpv pikoblx eachine tx02 frsky xm+ rotorx 2535 propellers camera holder: https://www.thingiverse.com/thing:2154537

thingiverse

free

Tiny Beast - 110mm Brushless Quadcopter by LeBraddockJames

...om/thing:1806046). uses racerstar 1103 motors, up to 66mm props, and has 20x20 mounting holes. use m3 hardware to secure the top.

thingiverse

free

Brushless Micro FPV Quadcopter by eCCoMaNiA

...cam with transmitter, racerstar 1103 brushless motor. you will need 4 of 10mm x 3mm spacer for cam mount and 8 screws for spacer.

thingiverse

free

Mini Drone Frame - GRacer One v5 PRO ^^ Update by GParts

...-20pcs-for-720-8520-coreless-motor-diy-micro-quadcopter-p-1092166.html battery: 1s 600mah (best for flips), 1000-1200mah (max) (:

thingiverse

free

FPV Nano 85 by Bongo_1st

...tenna: https://www.banggood.com/eachine-5_8g-3dbi-brass-antenna-omnidirectional-ipex-port-for-vtx01vtx02vtx03atx03-p-1147689.html

thingiverse

free

FT Power Pod by Maarten035

... holes are 3,1 mm to fit m3 bolts. i use a racerstar br2205 and my wires fit trought the spacing on top. it friction fits nicely.

thingiverse

free

Self clamping ESC Protector fitting GepRC KX5 Elegant by SchizoDuckie

...is is version 2 of this design. highly recommended to print this in abs instead of pla due to the level of detail you'll get.

thingiverse

free

Angry Oskie Micro Quad Frame for 0703 0705 Brushless Motors by osliang

...ut because of the inefficiency of 31mm propellers, i cannot recommend it. please use the 59mm version frame with 40mm propellers.

thingiverse

free

ourobeliskXlite - An X Frame Racing Multirotor by jstnb

...ery straps amazon link if you're looking at this design from rotorriot i wouldn't mind designing more frames pls hire me

thingiverse

free

AR Stealth Wing / RMRC Recruit motor spacer 10mm by nfluester

...m motor spacer for the back of the stealth wing. i am currently running a racerstar 2507 1290kv motor and 8" propeller on 4s

thingiverse

free

Exorcist Racing Quadcopter Frame (Mini x549)

...cerstar brushless motors crazybee f3 flight controller (f4 would be better now) hc48d fpv camera 2mm nylon standoffs 1s batteries

thingiverse

free

Tiny brushless fpv pack (Prop protector, fc support, cam support) for q85 or other by ici_robin

... br1103 and propeller furious 2035 4 blades fc support for flight controler type furious pico blx cam support eachine x73 for q85

thingiverse

free

Drive for Paddleboat by Vanny

...3 perimeter, all other with 2. infill not less than 50%. i used pla. still wip, so didn´t finish building. ....to be continued...

thingiverse

free

pod 210 racer by kolovitz

...most 30.5x30.5 flight controllers, and aio controllers like racerstar tattoof4 or starf3s it's very strong and lightweight. t

thingiverse

free

qav 210 esc cover and landing gear by MimarFPV

...39;s. i guess it can covers other brands esc's. esc cover dimensions : 26x35x8 mm printed with pla plus filament, %15 infill.

thingiverse

free

Mini Racer Dquad 120mm 3S Polycarbonate With Micro Swift RunCam by Microdure

...//eu.fpvmodel.com/gemfan-2035bn-4-blade-propellers-purple-ccw-cw_g144.html?u=746e3c0c6edcf25e https://www.facebook.com/microdure/

thingiverse

free

DJI Mavic Pro Clone 151%

...com/thing:4152711 gopro mount:https://www.thingiverse.com/thing:4152679 dropping system:https://www.thingiverse.com/thing:1821541

thingiverse

free

TBS Unify antenna holder for Martian 220 by Welbior

...- https://goo.gl/wkuz5i camera runcam eagle 2 800tvl - https://goo.gl/um16d6 lipo infinity 4s 1300mah 90c : https://goo.gl/3demm7

thingiverse

free

Genius 215 Cam Mount 30 by Welbior

...- https://goo.gl/wkuz5i camera runcam eagle 2 800tvl - https://goo.gl/um16d6 lipo infinity 4s 1300mah 90c : https://goo.gl/3demm7

thingiverse

free

Martian Gopro session holder by Welbior

...- https://goo.gl/wkuz5i camera runcam eagle 2 800tvl - https://goo.gl/um16d6 lipo infinity 4s 1300mah 90c : https://goo.gl/3demm7

thingiverse

free

Vice Versa V2 quadcopter (250mm) by shawdreamer

...ring with captive nuts on the base. req. 12x m3x25mm bolts 12x m3 nuts 15/04/2017 added simple action cam mount (go-pro or clone)

thingiverse

free

ZMR lapiece3D low racer UNI-SPACER FPV by lapiece3d

...v fpv : eachine 1000tvl antenna : pagoda lipo : tatu, infinity esc : racerstar 30a 2v dshot 300 - 600 gopro session hero 5 hero 6

thingiverse

free

DroneRacer220 by nonsaya

... 5.8g 600mw 32ch a/v for fpv w/antennahttp://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=80363 battery 3s 2200mah

thingiverse

free

Prop guard for microquad with 070X brushless motors and 40mm propellers by nppc

...e propeller. all 4 weights less than 1 gram. update: added v2 with higher guards. all 4 weights 1 gram. photos will come later...

thingiverse

free

Bwhoop B03 BR1103 brushless frame by mrvanes

...ld a modified eachine 600mah qx... lipo. i had to move the programming plug up to make it all fit with the racerstar 6a 4in1 esc.

thingiverse

free

Bwhoop B03 BR0703 brushless frame by mrvanes

...s designed to hold a 260/300mah 1s lipo. i had to move the programming plug up to make it all fit with the racerstar 6a 4in1 esc.

thingiverse

free

Connex iFlight iX5 V2 mod by TTest

...g screws ex. hs1177. quadcopter specs: racerstar tattoof4s 30a blheli_32 4in1 brotherhobby returner r5 2306 r-xsr connex prosight

thingiverse

free

VTX Holder Martian 2 by Welbior

...- https://goo.gl/wkuz5i camera runcam eagle 2 800tvl - https://goo.gl/um16d6 lipo infinity 4s 1300mah 90c : https://goo.gl/3demm7

thingiverse

free

TinyWhoop 68mm brushless (BR0703 revision) by _MFer_

... thing )) try if you want plz and comment... rev1 - 10/apr/2017 frame_rev2 - additional supports for ducts in the central part...

thingiverse

free

M2 spacers: 2.0mm, 2.25mm, 2.5mm, 3.0mm height by deks_

... i'm using the racerstar star6, which has larger components compared to the tinypepper 2s), and 2.5mm between the esc and fc.

thingiverse

free

1106 Brushless Motor Guard by Imozeb

...ar brushless motor high quality 1106 brushless motor check out my youtube channel for great quadcopter tricks, tips, and how-tos!

thingiverse

free

100mm micro brushless frame by deno6031

...upports if your slicer has issues with it(cura is known to have this issue) print it with full infill, it is still gonna be light

thingiverse

free

Eachine Aurora 90 Prop Guard Bracket by dudmahn

...uard brackets, so i designed this bracket as a replacement. i gives a bit more clearance for the props than the standard bracket.

thingiverse

free

Jet Engine (working) by AWELTIG

...com/channel/uctpsf6jwy7ep2tm9jbxuyeq?view_as=subscriber if you have any other questions feel free to email me- ahweltig@gmail.com

thingiverse

free

Firefly 150 lower plate and canopy mod by _hori

...l?rmmds=myorder https://www.banggood.com/700tvl-2_8mm-lens-100-degree-wide-angle-fpv-camera-ntsc-pal-p-1044895.html?rmmds=myorder

thingiverse

free

Martian 220 camera mount 20° by Welbior

...- https://goo.gl/wkuz5i camera runcam eagle 2 800tvl - https://goo.gl/um16d6 lipo infinity 4s 1300mah 90c : https://goo.gl/3demm7

thingiverse

free

Martian 220 camera mount 25° by Welbior

...- https://goo.gl/wkuz5i camera runcam eagle 2 800tvl - https://goo.gl/um16d6 lipo infinity 4s 1300mah 90c : https://goo.gl/3demm7

thingiverse

free

X-Frame Race edition by MIW89

... • 4 x buttonhead m3 x 22mm. • 8 x sockethead m3 x 8mm. (for motors) • 2 x m3 hex nuts. • 12 x m3 nylon hex nuts. enjoy!

thingiverse

free

Genius 215 Fatshark 600 700 tvl camera FPV mount by Welbior

... rhcp - https://goo.gl/wkuz5i camera fatshark 600tvl - https://goo.gl/xtfqej lipo infinity 4s 1300mah 90c : https://goo.gl/3demm7

thingiverse

free

ImpulseRC alien style mirco indoor brushed quadcopter by Flying_Ginger

...r-8520-8-5x20mm-53500rpm-coreless-motor-upgrade-for-eachine-qx90-qx95-diy-micro-fpv/32782425809.html?spm=a2g0s.9042311.0.0.xymdws

thingiverse

free

Bumpy 3 by Andora16

...runner-brushless-motor-p-9434.html?oscsid=f4tlcc6gc1m4phvibi0i035366 prop: 3 inch 3 blade (dys 3030) weight: 165g without battery

thingiverse

free

FPV RACER X-QUAD 250 for F3 / F4 Omnibus similar to TBS Oblivion by MeisterM2001

...r props up to 6" 4x m5x16 - pa bolt 4x m5 - pa nut and some m3 pa screws for fc / esc more detailed version 2 coming soon...

thingiverse

free

2021 Lidl Glider parts by Papsi

... motorkreuz, was hier auch gedruckt wird. emax rs2205-2300 2205 2300kv racing edition racerstar racing edition 2205 br2205 2300kv

thingiverse

free

Electric Skateboard Motor Mount by InputUnreal

...06-9f3c-4563-b568-d9873821d057-1&algo_pvid=7660fa06-9f3c-4563-b568-d9873821d057&transabtest=ae803_2&pricebeautifyab=0

thingiverse

free

Micro Drone 100mm Brushless supporting both 0703 and 1103/4/5 by Brax

... frsky taranis x9d plus : http://bit.do/frsky-taranis-x9d diversity receiver with dvr : http://bit.do/diversity-receiver-with-dvr

thingiverse

free

MINIBOT HYBRID by Kheine556

...p-1413572.html?cur_warehouse=cn&id=44070&rmmds=search https://www.youtube.com/watch?v=icjr89krogi&ab_channel=kheine89

thingiverse

free

Valus A6 210 racing drone by Dovanzeijl

...3x10mm (x8) 5mm stand-offs (x8) (for pdb and fc mount) plastic m3 screws 10mm (x4) (for pdb and fc mount) battery strap 10mm (x1)

thingiverse

free

8520 Drone Frame and camera guard by Squashy2828

...oks for rubber bands to secure the battery, put a piece of foam between battery and frame. the frame will be printed upside down.

thingiverse

free

Fire Truck 1/14 Scale KME Class A Pumper by Haxsaw1967

...ase, using 3/8" x 5/8" aluminum u cannel for the frame. the added motor cover is for a racerstar f540 brushless motor.

thingiverse

free

Bare Bones 120mm frame for 1103's.

...r a 0.4mm nozzle/ line width and an 8.5mm pcd (racerstar 1103). i used abs, 3 walls and 28% grid infill. giving 8.3g bare weight.

thingiverse

free

Fubar 130mm LED bracket by bluem6

...new-build-fubar-130mm-build-%28brotherhobby-1407-3600kv-racerstar-blheli_s-revo-f4%29 https://www.youtube.com/watch?v=iu35ofikiwi

thingiverse

free

Peon230 - Quadcopter by Tech2C

...er rear arm support. added 22 size motor arm enjoy this design? consider supporting me on patreon: https://www.patreon.com/tech2c

thingiverse

free

OpenRC F1 Four Wheel Drive Racecar (M4 screw based)

... 243, "km/h" echo: "1500kv,4s", 324, "km/h" echo: "-------------------------------------"

thingiverse

free

TwentyFour-7 2" Quad by jimbo_wa

...db racerstar 6a 1-2s esc's (x4) runcam nano fpv camera eachine vtx01 super mini 5.8g 40ch 25mw fpv transmitter frsky r-xsr rx

thingiverse

free

Whoop Drone Cross 4S Night Flight Acro by Microdure

...less on the support motors. 12xm1.6 + 12xm16 nut to fix the brushless supports to the chassis https://www.facebook.com/microdure/

thingiverse

free

FPV Micro 125 by Bongo_1st

...tps://www.banggood.com/eachine-flyingfrog-q90-micro-fpv-racing-quadcopter-spare-parts-micro-1000tvl-hd-coms-camera-p-1129846.html

thingiverse

free

Universal Motor Clamp 2212-type by alligator77

...y: m4*16 screw - 1 pcs, like this https://goo.gl/qhbokd m4*4x5 nuts (to fuse in plastic) - 1 pcs, like this https://goo.gl/94cgfj

thingiverse

free

64mm Brushless Tiny Whoop by THATDONFC

...on triblade esc: pepperfish esc 16x16 fc: pepperfish fc 16x16 with frsky battery: newbeedrone nitro nectar 250mah with jst ph 2.0

thingiverse

free

Dol_110_RC_Q by Makenlar

...5mw 48ch vtx 600tvl cmos 1/4 inch batteries: 2 * gens ace 800mah 3s1p 11.1v 40c 4ps 8 ¤ 3m countersunk 1ps 20 * 3m 3ps m3 hexnuts

thingiverse

free

Boldclash B06 flight controller (Inductrix size) adapter to 16x16 mm stack by _MFer_

...projects/tinyfish/ = or search for clones weight - around 0.4-0,6 gm depending on filament... i will try it in couple of weeks...

thingiverse

free

Mini Quad Acro 120mm Micro Pico F3 Brushless 1103 2S 10.000kv by Microdure

...er-prop-20pcs-for-720-8520-coreless-motor-diy-micro-quadcopter-p-1092166.html?p=ld020411878172015024 connection screws: m1.6x12mm