thingiverse

free

PIgrrl Pi2 by usafhas

...ere good. this is with the 2.4 inch screen still, as that is the only screen i have, could easily be modified for larger screen.

thingiverse

free

PiGRRL Zero Button Molds by steigen

...lds by steigen thingiverse 2-part molds for each button type for the pigrrl zero.https://learn.adafruit.com/pigrrl-zero?view=all

thingiverse

free

Buttons PIGRRL 2 Mold by zauberflo

...buttons pigrrl 2 mold by zauberflo thingiverse a mold for pigrrl 2 buttons to fill with sugru

thingiverse

free

PiGRRL Logo by smartroad

...sure it doesn't stand to proud of the surface. i stuck mine using some double sided tape to the lower left side of the pigrrl

thingiverse

free

Multicolor Button for PiGRRL Zero by 3dprintspace

...ions of the pigrrl zero. make sure you print the caps in pla and the base in ninjaflex or semiflex for best quality and function.

thingiverse

free

PiGRRL 2 Cover by MeSysel

...e display should fit. it is recommended to put a lane of foam gasket on one or both smaller sides to prevent the pigrrl fall off.

thingiverse

free

Screen protector for PIGRRL - Playstation style by spooner2011

... for pigrrl - playstation style by spooner2011 thingiverse pigrrl playstation style screen protector. please share your results.

thingiverse

free

Stand for PIGRRL - Playstation style by spooner2011

... for pigrrl - playstation style. if your printer is good at bridging, this will print without support. please share your results.

thingiverse

free

Pocket Pigrrl - Volume Knob by pcarlson

...ngiverse volume wheel for pocket pigrrl. this will fit normal 5mm trimpot. just wire a 5kohm linear trimpot to adjust the volume

thingiverse

free

Pocket PiGRRL Stand & Charger by nicsna

... easy installation of usb cable and if necessary you can write a comment and i will customise the micro usb hole to your fitting.

thingiverse

free

Pigrrl Remix by harddrv1

...iginalish (<--- new word) and split some for multicolor. i hope to resolve sound also but as stated it is a work in progress.

thingiverse

free

Adafruit PiGRRL Pack 2.0 BUTTON Upgrade by calmabalot

... button base in ninja flex or semi-flex and the caps can be printed in pla or another printable filament that doesn't shrink.

thingiverse

free

PiGRRL Zero Back For a Larger Battery by VDFreesince1983

...e created a pocket to recess the pigrrl zero's battery a bit for a larger battery or better fit with a standard size battery.

thingiverse

free

Looser buttons for PiGRRL Gameboy by shaische

...meboy console by adafruit as we found that the buttons we printed wouldn't "click" because they were a bit too big.

thingiverse

free

PiGrrl 2 - 4x Shoulder Buttons

...ded the missing two shoulder buttons to the back. i just wired those two extra buttons to two of the screen buttons. works great!

thingiverse

free

PiGRRL 2 Base by disruptityourself

...ole. more importantly you can charge it while its docked. i left the design file there too in case someone wants to play with it.

thingiverse

free

PiGRRL 2 + headphones, lens, and buttons by Blackuma

...tp://www.thingiverse.com/thing:1701470 all other parts come from adafruits pigrrl 2 v1.1:http://www.thingiverse.com/thing:1277483

thingiverse

free

Pigrrl dpad rocker by monofuel

...e buttons. only compatible with the pigrrl zero. the buttons on the pigrrl 2 has a smaller gap and the model needs to be tweaked.

thingiverse

free

PiGRRL Zero Raspberry Pi Zero Gameboy by adafruit

... keyboard or mouse, usb audio adapter or usb hub. check out our full step-by-step tutorial:https://learn.adafruit.com/pigrrl-zero

thingiverse

free

PiGrrl 2 Side Cover

...a+? this little cover will fill in the hole on the right side of the pigrrl2 v2 case due to to the smaller form factor of the a+.

thingiverse

free

PiGrrl Zero Advance by Flyon20s

...ve to reprint the back part because was not enough room. i hope you like. last update, i have given up on this use as you feel.

thingiverse

free

Split Buttons for pigrrl 2 by dustmason

...in my case, so i modified the source fusion 360 model by slicing the buttons into individual pieces. they are otherwise the same.

thingiverse

free

PiGRRL 2 Cylinder Remix by smartroad

...two halves to clip together rather than screws. the logo on the front is available here: http://www.thingiverse.com/thing:1708201

thingiverse

free

Yoshipad (PiGRRL Remix) by Nezgsy

...grrl with the exception of the battery of which i used one which i had spare already. https://www.youtube.com/watch?v=qdq0xkw3dvg

thingiverse

free

PiGRRL Zero Plus Remix Remix Remix by Hypertoken

...t i wanted it to be an inlay. there is a little dot in the logo to help with proper alignment of the logo (center on build plate)

thingiverse

free

Another PiGRRL "0.2" by n602

... sketch" is done, a lot of unnecessary sketches appear, and the operation of 123d becomes dull. that problem will disappear.

thingiverse

free

PiGRRL 2 Labeled Action Buttons by kkiplinger

...b on the housing. with this remix, the label letters will be upright when the part is inserted so that the buttons don't rub.

thingiverse

free

PiGRRL Zero - Super Sonic Remix by firestorm185

...3 http://www.thingiverse.com/thing:545582 thanks to those who made those models available, and i hope you all have fun with this!

thingiverse

free

Pigrrl Zero Bottom Case Beefier Joint by SNEAKxxATTACK

...joint by sneakxxattack thingiverse i added more material to the joint to prevent breaking issues when connecting the two halves.

thingiverse

free

PIGRRL - Playstation style by spooner2011

...mm 2x 4x32mm 8x 2.4x7mm follow this link for the technical part.https://learn.adafruit.com/pigrrl-zero please share your results.

thingiverse

free

Pocket PiGRRL by adafruit

...ike that bmo? check out the adafruit tutorial. you can get all the parts to build this project on the shop at adafruit dot com.

thingiverse

free

PiGrrl 2 - Shoulder mount fix by FinalMadness

...gn. the print breaks and the holes for the srews were to small. i made a remix with bigger holes for the srews and it is stronger

thingiverse

free

PiGRRL Zero Plus No Audio by joeyhudack

...ter. also included a front case with no cutout for the screen which will allow you to cut your own hole for your specific screen.

thingiverse

free

PiGRRL 2 HDMI Bottom by monofuel

...dmi port was a bit too tight of a fit for the adapter, 1.0.2 (for the 1.0 case) and 1.2.2 (for the 1.2 case) are slightly larger.

thingiverse

free

PiGrrl 2 bottom for Charge Status LEDs by Geonovast

... the leds kinda "snapped" in on mine, but i secured them with a small drop of superglue when i had everything wired up.

thingiverse

free

Game Boy inspired - PiGRRL 2 - Raspberry Pi Game Console by emisansev

... back cover has a hollow of 4.2 x 3.7 cm, at the top part, for placing an original style cart label (they are sold on ebay, etc).

thingiverse

free

PiGRRL Zero Plus by 3dprintspace

... my multicolor button for the pigrrl zero and zero plus if you are interested in that - https://www.thingiverse.com/thing:2368254

thingiverse

free

PiGRRL 2 Remix - Charging Status & Headphones by friedsemiconductors

...dback what would you have added/removed or what would you have made different? did the print come out fine? etc. my other designs

thingiverse

free

Another PiGRRL"0.3" by n602

... sketch" is done, a lot of unnecessary sketches appear, and the operation of 123d becomes dull. that problem will disappear.

thingiverse

free

PiGrrl Zero Case by Bodmi by Bodmi

...x on a piece of 15x23mm pcb i printed it in pla and it fits everything perfekt. infil 35% as screws i used 2.5mmx10mm woodscrews.

thingiverse

free

PiGRRL Zero Buttons with 3DS Letters by AlexDeGruven

...discerning the letters more easily. added a model with the xbox button layout for those who prefer that over the nintendo layout.

thingiverse

free

PiGRRL Zero Advance by 3dprintspace

...controller? yes sir. there are several other minor details when creating this from scratch, its hard to go through them all here.

thingiverse

free

Modified Buttons for Pigrrl Zero Plus by AjaxSliguy

...just to be fancy. i printed these in tpe with low infill to make them squishy but i am fairly confident hard plastics would work.

thingiverse

free

PiGRRL Zero Screen Bezel by mrdralixx

...ted in making the plus version that jpete24 offers as well, so i will most likely have a version for that too in the near future.

thingiverse

free

PiGRRL 2 Enhanced Buttons (ABXY/Action, D-Pad) by Jaegermeiste

...p instead of 0.5mm), just in case more deeply embossed letters prove difficult to print or catch too much crud in day-to-day use.

thingiverse

free

PiGRRL Zero Plus with Backlight Control by angryballoon

...figure out how to have sound work too that would be awesome. hit me back if you have any questions about this, and happy hacking!

thingiverse

free

PiGRRL 2 - Raspberry Pi Game Console by adafruit

...39; elbow grease, but don't be discouraged! if your dedicated to take on this project, it'll only take a weekend to make.

thingiverse

free

Buttons with letter by robeweb

...buttons with letter by robeweb thingiverse buttons for pigrrl zero

thingiverse

free

Wiring Schematic for Pigrrl Zero Plus, custom washer by AjaxSliguy

...e correct orientation as per the video jpete24 has up. please let me know if you find any errors and i hope it helps some people!

thingiverse

free

PiGRRL Zero XL by joeyhudack

...k6uk/ref=oh_aui_detailpage_o01_s00?ie=utf8&psc=1 everything else should be straight forward like in adafruit's tutorials.

thingiverse

free

PIGRRL 2 Improved buttons for TPU by AklemTech

... case and feel decent on the rubber dome buttons. glue at the end of the straight straps, look at first picture for other shapes.

thingiverse

free

Adafruit's ButtonPad Rev C 3D model by LuisDUgena

...ena thingiverse simple model for adafruit's buttonpad rev c pcb board or pigrrl zero custom gamepad used on the pigrrl zero.

thingiverse

free

PiGRRL Zero Plus Remix by Galvatrondeva

...ay=pitft22,rotate=90,speed=80000000,fps=60 --- end adafruit-pitft-helper thu 17 mar 17:11:08 utc 2016 --- dtoverlay=hifiberry-dac

thingiverse

free

PiGRRL Zero - Modified by Stadsport

...gering (this is only necessary if you're printing the buttons in pla like i did). let me know how it works out for you guys!

thingiverse

free

Retropie Portable Gaming Device (remixed Pocket PiGRRL) by paulgreg2

...grrl i’ve made some changes in top.scad and bottom.scad to fit my changes. detailled build instructions are available on hackaday

thingiverse

free

PiGRRL Zero - Modified for Speakers and Standoff Screws! by 3dprintspace

... my multicolor button for the pigrrl zero and zero plus if you are interested in that - https://www.thingiverse.com/thing:2368254

thingiverse

free

Hard pocketPiGRRL TFT buttons by ADAM_2001

... these are buttons for the pocket pigrrl by adaruit. these buttons are to replace the ones that have to be printed in ninjaflex.

thingiverse

free

Larger Screen version of PIGRRL 2 by Elavos

...l fun doing, i have already built 2 for my 2 kids. my wife is now aking for a 3rd one, maybe next will be 5 inches or 7 inches :)

thingiverse

free

PiGRRL 2 Inner Frame and Case Mod by pyrohmstr

...e usb hole is larger in the stl than it was on the version i photographed. i fixed it before uploading and it should be fine now.

thingiverse

free

Support batterie externe PiGRRL 2 by Mad78

...x supports de vis du haut (ceux permettant la fixation de la plaque des switchs arrières ). (nouveaux boutons plus ergonomiques )

thingiverse

free

PiGRRL 2 - Remix for 2200 Lithium Ion Cylinder Battery by markab

...s for clearance, i intend to hot glue the amplifier and power boost onto the new lower standoffs instead of screwing to the case.

thingiverse

free

Color Buttons for Raspberry Pi Zero Gameboy by Roxanna77

...http://www.thingiverse.com/thing:1546607). this allows each of the four buttons to be whatever color you want. super glue needed!

thingiverse

free

GamePi

...nt to change the model for it to work with your buttons. printing the case in pla with 10% infill worked for me. supports needed.

thingiverse

free

compact Pi-TFT&A+ case by Jooxoe3i

...tened - so that the pcb of the pitft sits (almost) directly on the highest components: the hdmi and usb sockets on the raspberry.

thingiverse

free

Pi-Boy Classic by Jooxoe3i

...magnetic: a sturdier variant that holds onto the screws of the controller and the display unit with 5mm diam. x 2mm high magnets.

thingiverse

free

PiGrrl2 mod: Rotated Pi - HDMI out

... etc.) please visit the original page of the pigrrl2 project on adafruit's website:https://learn.adafruit.com/pigrrl-2 enjoy!

thingiverse

free

GamePi MK1 by Scorch1262

...tml schiebeschalter:https://www.amazon.de/gp/product/b00ok9fauw/ref=oh_aui_detailpage_o03_s00?ie=utf8&psc=1 raspberry pi zero

thingiverse

free

piGrrlZero with Headphone and HDMI by penni104

...t some point i will probably remix the case to include the button faceplate and the cutout for the hdmi port so check back later.

thingiverse

free

Retro Raspberry Pi Gear by miniarcademachines

.../8 machine sccrews 1x - ribbon cable to cut up for jumper wire connections, and possibly 22 gauge for connecting the analog stick

thingiverse

free

RETRO-CM3: A POWERFUL RETROPIE HANDLED GAME CONSOL by DeanChu

...ng this console can be found on instructables:http://www.instructables.com/id/retro-cm3-a-powerful-retropie-handled-game-console/

thingiverse

free

5 inch Raspberry Pi Gear: Retro Handheld game system by miniarcademachines

.../8 machine sccrews 1x - ribbon cable to cut up for jumper wire connections, and possibly 22 gauge for connecting the analog stick

thingiverse

free

Raspberry Pi game boy case by mdsajjad

...w grease, but don't be discouraged! if you're dedicated to taking on this project, it'll only take a weekend to make.

thingiverse

free

Rodrigo Retropi Case by calazaz

...amp circuit. if i get enough requests i'll do this and update it but you should be able to make those modifications yourself.

thingiverse

free

SNES Zero by robertguy

...12/18/16): just uploaded new buttons and dpad with chamfered edges. the first versions hurt my fingers after playing for a while.

thingiverse

free

Super Game PiSP by Carasibana

...internals ) inspired by, but not directly derived from the super game pi ( used it as reference for quite a few measurements )

thingiverse

free

Pirakeet - Raspberry Pi Zero Handheld Retro Game Console by Ampersands

...es an stl for a blank rear half so you can add your name or whatever to it instead of the logo, and a basic clip on screen cover.

thingiverse

free

PiPlayer by bobblejot

...ax ew-7811un 150mbps wireless nano usb adapter additional items: powerblock by petrockblock 3pcs round 20mm 8ohm 0.5w speaker

thingiverse

free

Pi4 Super Retropiepod by morganlowe

...2 https://www.thingiverse.com/thing:1635368 all the others out there! click watch for updates!! thank you! like, share and enjoy!

cults

free

Pocket PiGRRL

...pocket pigrrl cults pocket pigrrl pocket pigrrl

cults

free

PiGRRL 2 - Raspberry Pi Game Console

...pigrrl 2 - raspberry pi game console cults pigrrl 2 - raspberry pi game console pigrrl 2 - raspberry pi game console

cults

free

PiGRRL Zero Raspberry Pi Gameboy

... step-by-step tutorial](https://learn.adafruit.com/pigrrl-zero). [video on youtube](https://www.youtube.com/watch?v=uaiillannj4)