thingiverse

free

Makerfarm i3v Knob by thecomputerdewd

...makerfarm i3v knob by thecomputerdewd thingiverse made this for my makerfarm prusa i3v 10".

thingiverse

free

MakerFarm i3v Bed Clips by PrototypeProfessor

...makerfarm i3v bed clips by prototypeprofessor thingiverse https://youtu.be/joaz8nnzsv0 i3v maker farm

thingiverse

free

i3V X clamp by adamfilip

...sal vslot plate. hole spacing is 40.64mm using on a modified makerfarm i3v 12" made for gt2 belt freecad file also provided

thingiverse

free

Makerfarm Prusa i3v Knob by BigBadBison

...sa i3v knob by bigbadbison thingiverse i made this knob for the makerfarm i3v, although it should work on a variety of printers.

thingiverse

free

Prusa i3v bed corners by scurrg

...currg thingiverse this is for the makerfarm 8" prusa i3v with the aluminum bed upgrade. allows for one tool bed levelling.

thingiverse

free

Makerfarm i3v control knob by benlew

...y benlew thingiverse this fits on my makerfarm i3v, should also fit any other printer with the reprap discount smart controller.

thingiverse

free

i3v MakerBricks (Indian riprap of MakerFarm by tskamath

...arm by tskamath thingiverse my modification to makerbricks i3v, to ensure the use of the 3d printer is enjoyable and not a pain.

thingiverse

free

Prusa i3v y-bed belt bracket by shawnkhang

...prusa i3v y-bed belt bracket by shawnkhang thingiverse prusa i3v y-bed belt bracket.

thingiverse

free

Knob for MakerFarm Prusa i3v by acdawg

... on the lcd for the makerfarm prusa i3v. update shortened knob overall to keep the knob from interfering with button pressing.

thingiverse

free

i3v Filament Holder by PeteyPub

... work on any printer since the design is pretty standard. one bolt connection in the center... 8mm rod through the top.. enjoy...

thingiverse

free

Prusa 12" i3v 80mm fan mount by MrAlkoFighter

...prusa 12" i3v 80mm fan mount by mralkofighter thingiverse just a 80mm fan mount for my prusa i3v.

thingiverse

free

Prusa i3v Z Trap by manianac

...or the makerfarm prusa i3v. i wanted something that gripped the z nut solid without any backlash. its not pretty, but it works

thingiverse

free

Blower duct for MakerFarm i3v print cooler by Printbus

... at http://3dprintboard.com/showthread.php?3461-makerfarm-8-quot-i3v-prusa-build-by-printbus&p=26657&viewfull=1#post26657

thingiverse

free

I3V Larger Spool Holder with indented text by Davett42

...ext by davett42 thingiverse as above :) fits larger spools to your i3v :) for use with http://www.thingiverse.com/thing:920704

thingiverse

free

i3v SuperCool2000 by adamfilip

... made for 40 mm fan to be mounted left and right side versions attached this needs some adjustment to work right, be warned

thingiverse

free

MakerFarm i3v Fan Shroud by BrotherShotgun

... this is a near duplicate match to the shroud that came with my printer // with the ability to mount an led light ring i designed

thingiverse

free

i3v Caliper Holder for bed leveling by AbuMaia

... print bed. inspired by http://www.thingiverse.com/thing:115671, which i used on the makerfarm i3 before i upgraded to the i3v.

thingiverse

free

I3V Chimera Extruder Mount by Simonious

...i3v chimera extruder mount by simonious thingiverse very simple extruder mount for the soon to be released chimera extruder.

thingiverse

free

Remix of i3v Endstop for 8" Machines by Zulfe

...dification. it allows for you to configure multiple holes across a longer piece to use his design with the 8" makerfarm i3v.

thingiverse

free

E3DV6 Mounting Bracket for Makerfarm Prusa i3v 12 Inch by warpjam

...i3v 12 inch by warpjam thingiverse this is a mounting bracket i made for the makerfarm prusa i3v 12 inch with a e3d_v6 hotend.

thingiverse

free

i3v Y axis Nema 17 Fan Mount by obv_

...fit around the i3v's y axis motor mount. removed material from one side to allow the i3v aluminum bed frame to clear the top.

thingiverse

free

Simple i3v cooling duct by cperiod

... better tuned designs, but it doesn't get in the way of anything. i'm using a hexagon and it's tuned for that height.

thingiverse

free

Makerfarm i3v to modular mounting bracket by Dippyskoodlez

...t funny when i import it to simplify, scale up by 10.1 for proper dimensions and rotate for printability. 2/5/2015 - completed.

thingiverse

free

MakerFarm i3v Z axis endstop bracket. by PrototypeProfessor

...makerfarm i3v z axis endstop bracket. by prototypeprofessor thingiverse https://youtu.be/mere_19xyge

thingiverse

free

Maker Farm I3V Spool holder by evans036

...maker farm i3v spool holder by evans036 thingiverse requires a standard carriage bolt to serve as the spool axle

thingiverse

free

Makerfarm i3v 10in Top by mattanonymous

... since it's too big to fit as one. i used acetone and scrap abs to weld the parts together, but jb weld should work well too.

thingiverse

free

E3D X carriage for MakerFarm i3V Bowden by 3DMentes

...e3d x carriage for makerfarm i3v bowden by 3dmentes thingiverse i never printed it (yet).

thingiverse

free

3DPlastX spool holder upgrade for Makerfarm i3v by glukz

...re is my small modification for makerfarm i3v to support this spools. design is very simple but probably useful for someone else.

thingiverse

free

Makerfarm I3V 12" Cable chains by Repraph

... "cable chain by rotoscan" http://www.thingiverse.com/thing:11978 will post some more pictures and information soon...

thingiverse

free

Prusa i3v - X Carriage - Direct Drive - No Sensor by obv_

...ws you to mount a nema 17 motor to the carriage plate itself. this version does not have the sensor mount found on thing #1250192

thingiverse

free

Non Contact Auto Bed Level Probe mount for Maker Farm i3v by TheHotEndChannel

...d level probe mount for maker farm i3v by thehotendchannel thingiverse non contact auto bed level probe mount for maker farm i3v

thingiverse

free

Makerfarm I3v bulldog mount by soup3y

... by soup3y thingiverse i have not printed this as of yet, when the abs arrives i will print it and let you all know if it works.

thingiverse

free

Makerfarm i3v e3d v6 mount plate by mattanonymous

... my makerfarm i3v wade-style extruder, so i created this. it's a little longer than necessary, but appears to work just fine.

thingiverse

free

Makerfarm i3v X-carriage for Hexagon by Mattstrike

...rint bed to cool the hexagon hot end. -no-hardware belt mount -captured nut on lower eccentric wheel mount for easier adjustments

thingiverse

free

Dave's i3V Universal Spool Axel with dogbone ends by Davett42

...its better than the wood one included seems you can use all sizes of roll - but if you can - build a version that has bearings :)

thingiverse

free

Prusa i3v Ext.Top with Radius by L7TECH

...erse http://www.thingiverse.com/thing:478776 thanks bison!! same thing happened to me today. just a little mod for the top.

thingiverse

free

Greg's Accessible Extruder for MakerFarm i3v by jdsantiagojr

...#39;s accessible extruder for makerfarm i3v by jdsantiagojr thingiverse extruder packaged with makerfarm prusa 8" i3 kits.

thingiverse

free

Prusa i3v z-axis adjuster by ANTALIFE

...you bought the kit from makerfarm then you can use the extra m3x25mm bolt along with some wood screws to put this thing together.

thingiverse

free

MakerFarm i3v X Belt Mount by AbuMaia

... used to mount the x belt to the x carriage. made using the real belt scad module from http://www.thingiverse.com/thing:620755.

thingiverse

free

Typhon's Airtripper BSP for MakerFarm i3v / M3 Mount by typhon3d

...makerfarm i3v more pictures will be added soon of it mounted let me know what you think and any improvements i could make! thanks

thingiverse

free

MakerFarm i3v BLTouch Nut Trap by fragmen52

...rm i3v bltouch nut trap by fragmen52 thingiverse i have a bltouch coming in a few days and didn't want to deal with a wrench

thingiverse

free

Makerfarm Prusa i3v 12" Knob by adamfilip

... by adamfilip thingiverse inspired by this knobhttp://www.thingiverse.com/thing:391464/#files made to fit the 12" version

thingiverse

free

Prusa i3v LCD Display Knob by Evolution3D

...igned a simple knob for it with a little "3d" art on it. i love it! hope all you prusa users enjoy it also cheers

thingiverse

free

i3V Dual Flexy/bowden by ImmersedN3D

...on with a rear mounted servo. this allows more room for print fans. i also added a fan mount that hold two 50mm radial blowers.

thingiverse

free

Makerfarm Prusa i3v Vibration damper by BigBadBison

... install, and do a good job of reducing noise. my printer is on a hollow chest so it is still a little noisier than i would like.

thingiverse

free

Dual I3V extruder carriage by Simonious

...w.thingiverse.com/thing:147705 to a bot with a rail setup for a carriage like this:http://www.thingiverse.com/thing:481769/#files

thingiverse

free

Adjustable Z Endstop for MakerFarm Prusa i3v by clough42

...e.com/thing:321810 update: i now also have a micrometer-adjustable z endstop available: http://www.thingiverse.com/thing:356819

thingiverse

free

Remix of the belt Y belt holder For Makerfarm i3V by Pitaven

...de a new y bed out of aluminum for my makerfarm 12" i3v. it was easier to drill round holes than try to machine square ones.

thingiverse

free

i3V Z Axis Support with Filament dispense by Forsaken541

...with filament dispense by forsaken541 thingiverse just added a nozzle off the front of the spool holder side for filament guide.

thingiverse

free

Ultimate i3v Cooling Solution (MakerFarm) by Montiey

...arm) by montiey thingiverse made for a 50mm fan, e3d lite6 / v6 (just edit the sketchup files to make other fans/hotends fit) :)

thingiverse

free

MakerFarm i3V ATX PSU mount by cperiod

...clean up my long neglected wiring. note that if you want to play with the openscad, you'll need the source for thing 1257152.

thingiverse

free

Makerfarm Prusa i3v one tool bed adjustment bracket by MAGA_GodBlessTrump2020

... edges, as in the makerfarm prusa i3v kit. my first design, go easy... printed, tested, in use. works great, and much easier.

thingiverse

free

MakerFarm 12" (10",8") i3v / e3D TITAN AERO Upgrade by L7TECH

...tech thingiverse hope you enjoy!! it may also work with 8" & 10" i3v makerfarm. any question just let me know. b3d

thingiverse

free

Prusa i3V Y axis end-stop bracket by prospectorland

...ollers to go the maximum possible range. with this bracket, i am able to print up to 10 mm to the edge of my heat plate. enjoy.

thingiverse

free

Prusa i3v - X Carriage - Direct Drive by obv_

.../////////////////////////////////////////////////// update - 2016/03/03 started working v2 of this carriage. it can be found here

thingiverse

free

MakerFarm i3v Inductive Sensor Mount by acdawg

...igned for approximately 18cm diameter inductive sensor (http://a.co/9wmezol). uses the existing 15mm m3 screw on the x carriage.

thingiverse

free

Adjustable Camera Mount for Prusa i3V by eae01751

...ct/b001m53fx6/ref=oh_aui_detailpage_o02_s01?ie=utf8&psc=1 i disassembled the base so that i could use it on a custom mount.

thingiverse

free

i3V Z end stop replacement for micro adjustment, MakerFarm by KentDixson

...s that the 8" i3v doesn't have extra length extrusion to attach the upper mount to. may only work with 10" version.

thingiverse

free

Universal filament spool holder for Prusa i3v by fragmen52

...sa i3v by fragmen52 thingiverse i wanted a more compact design than geodave's design http://www.thingiverse.com/thing:587840

thingiverse

free

Longer Spool Mount Smoother for MakerFarm Prusa i3v by acdawg

...arm prusa i3v by acdawg thingiverse http://www.thingiverse.com/thing:326641 modified to be 98mm long for spool holder extension.

thingiverse

free

Parametric Y-Axis Back Brace for 8", 10" or 12" Prusa i3v by GeoDave

... to be 4mm longer. that is you will have to replace the current two m3x16 bolts with m3x20 & the two m5x12 bolts with m5x16.

thingiverse

free

i3v Lead Screw Nut Plate by cperiod

...place. besides the original hardware, you'll need another m3 bolt and nut each. probably. you might get by with just the two.

thingiverse

free

Underslung X Endstop for extreme X travel (MakerFarm i3v) by clough42

...nt installs under the lower x extrusion with an m5 screw and t-nut and provides an opening to route the wires behind the z screw.

thingiverse

free

SD Card holder for i3v 8" by themiz2008

...e original one i downloaded didn't fit because of the bottom corner, and wasn't tight enough to hold an sd card in place.

thingiverse

free

Maker Farm Prusa I3V Z-Axis End Stop Adjustment by gmelenka

...w and nut trap for fine tuning extruder height. the current model is designed to use a #6-32 screw and nut for height adjustment.

thingiverse

free

Makerfarm Prusa i3v Cooling Fan by BigBadBison

... full list. --update-- 06/01/15 - added an option for an m5x30 bolt 14/02/15 - added a shroud to amplify airflow near the print

thingiverse

free

Makerfarm 12" Prusa i3v endstop by Breezor

...extended bracket of 26 mm to align properly. also i adjusted for the channel lock collar which needed some space on both pieces

thingiverse

free

Wire Management for V-Slot Printers (MakerFarm i3v) by clough42

...t to provide a place to tie off wires. the groove plate slides into the end of the extrusion to capture and hide smaller wires.

thingiverse

free

MakerFarm i3v LED Angel Eye Light Ring by BrotherShotgun

...rings // a 60mm will fit well around a hotend to see a piece in progress better // i'm sure there are all kinds of other uses

thingiverse

free

Makerfarm Prusa i3v VORON X Carriage by Jsut210

...rge of my x carriage design with russiancatfood's voron extruder. includes servo for bed leveling probe and blower fan mount.

thingiverse

free

E3D Titan i3v mount (fan and servo mounts) by andrewlstewart

...-limits. i mounted the nozzle bracket to the i3v mount using pan head #6 screws. i also added a few spots for zip-tieing cables.

thingiverse

free

Makerfarm I3v Y Belt Holder by M8ker

...s. also not backlash. for installation you will need : 1) stock m3 long screw and lock nut. 2) 4- m3x10 or 12 mm 3) 4 m3 nuts

thingiverse

free

MakerFarm i3v Servo Holder (auto bed leveling) by d3fc0n0wltraps

... i3. this is meant to be a press-fit for my servo, measurements forthcoming, but it is a very standard small analog servo size.

thingiverse

free

MakerFarm i3v Fan Cover by TechMasterJoe

...on with warping on makerfarm printers so i made this if you like it give it a shot fits 40mm fans simply slides over sides of fan

thingiverse

free

Knob for Makerfarm Prusa i3v with graphical display by stevelucky

...place as it fit well, but was just a little to loose. now, just insert a small grub screw and tighten it down and it holds tight.

thingiverse

free

i3v anti z wobble and backlash mount by scratchhax

... original mounts are a little over sized. you'll need a 50mm spring to hold the nut in place but can reuse the original nuts.

thingiverse

free

Makerfarm I3v (10") Bed Leveling Clips For Rounded Corner Beds by Techson

... help secure the clip to the table. parts were created in viacad pro 9 & converted to dxf & stl formats (also included)

thingiverse

free

Simple z end stop for Prusa i3v from MakerFarm by KentDixson

...eed: simplez_z_axis_arm.stl simplez_x_axis_arm.stl (2)m5 t nut (2)m5x12mm m4x35mm (this bolt could be much shorter) small zip tie

thingiverse

free

Z Endstop mount for Makerfarm Prusa i3v by subthermal

...his thing gets the switch closer to the frame so it's easier for the x carriage to hit it. also provides excellent stability.

thingiverse

free

exhaust shroud for Makerfarm i3V by ImmersedN3D

...tape to help seal the seams. this model is longer than the one i'm using in the picture. it should extend beyond the wheel!

thingiverse

free

i3v 10" Prusa Makerfarm X-Carriage Bulldog Lite Extruder Style by Saf

...lldog lite mounting plate in the orientation shown. the test fit uses the hexagon extruder, i have not tested other extruders.

thingiverse

free

Makerfarm i3v hexagon fan shroud with material fan by Mattstrike

...away from the print bed. i use the material fan to blow at the bed for pla and away from the bed when printing with abs or petg.

thingiverse

free

E3DV6 blower fan front mount for Makerfarm i3v greg wade by Westworldwalker

...t mount for makerfarm i3v greg wade by westworldwalker thingiverse i just wanted a simpler version with less "circle."

thingiverse

free

Makerfarm I3v ACME Lead Screw Upgrade by M8ker

...olgertech.com/products/500mm-lead-screw-8mm-screw-pitch (or ebay) 5mm to 8mm flexible couplings 4x m5x 12 to 15mm bolts 4x t nuts

thingiverse

free

Makerfarm Prusa i3v Auto-bed leveling Servo Mount by VoltaicLoki

... as cut-out to hold m2.5 nuts if you wish to screw in your servo motor. these can both be disabled in the .scad file if desired.

thingiverse

free

Makerfarm Prusa i3V Long Hot Bed Clip by Forsaken541

....thingiverse.com/thing:240181. it is 100mm long but only 16mm deep. we had trouble with the print head contacting the original.

thingiverse

free

MakerFarm i3v Spool Holder Replacement by gmelenka

...between the spool and the bottom of the spool holder. the sides of the spool holder are fastened to the base using m3x25 screws.

thingiverse

free

Makerfarm Prusa I3v ZAxis Protectors by kkessler

...pening for bearing, since it doesn't really need the bearings, and most people won't have bearing this size laying around

thingiverse

free

MakerFarm i3v Chimera Carriage by Buket0chicken

...ack of the chimera so that both nozzles are resting on the bed 6.) tighten the set screws for both nozzles 7.) zero the bed again

thingiverse

free

LED light for makerfarm prusa i3v by DangerOpps

... not super bright but way better than no light at all. one section of led tape. i used rgb because that is what i had on hand.

thingiverse

free

Prusa i3v bed auto-level by shawnkhang

...bracket requires the nut to be loose. the lower bracket requires the nut to be snug. update upper bracket, fixed some dimensions.

thingiverse

free

MakerFarm i3v Inductive Sensor Mount - Volcano by acdawg

...igned for approximately 18cm diameter inductive sensor (http://a.co/9wmezol). uses the existing 15mm m3 screw on the x carriage.

thingiverse

free

Makerfarm i3v 8" Y idler by bloom1

... with my kit ie the nuts did not get trapped and the screws were too short. i modified it and now it is perfect (for me at least)

thingiverse

free

Makerfarm i3v EZ load extruder by Mattstrike

...ad filament. just bring the hot end up to temp, and disengage the idler with one hand and pull/push the filament with the other.

thingiverse

free

Makerfarm I3v Bowden X Carriage by dancushing87

...looking at funny angles. apologies for the mess at the minute but this is very early in development. cable tidy to come later.

thingiverse

free

MakerFarm 8" Prusa i3v Logitech C270 Camera Bed Mount by BrencelJ

...c270 camera bed mount by brencelj thingiverse logitech c270 camera bed mount to accommodate my own requirements for the printer.

thingiverse

free

MakerFarm i3v MeanWell type power supply cover by Printbus

...enscad script includes dimensional tailoring suggestions for use with a meanwell power supply in the original makerfarm location.

thingiverse

free

Makerfarm Prusa I3V Z Nut Clip by zapta

...ing the two clips at once has the advantage that the pla of each layer has more time to cool down before printing the next layer.

thingiverse

free

i3v X Carriage and Fan shroud by scratchhax

...the material being printed and the hotend without requiring a second fan. if you use the material fan you must use a 10+ cfm fan.

thingiverse

free

MakerFarm i3v X-axis Belt Mount by Printbus

...used in the i3v. this is intended as a complement to my y-axis belt mount available at http://www.thingiverse.com/thing:796250.

thingiverse

free

Adjustable-Tilt X Carriage for Double Extruders on MakerFarm Prusa i3v by clough42

...ble extruder and the itty bitty double flex extruder. this removes the need to tilt the entire x carriage to level the nozzles.

thingiverse

free

Cable Guide for Makerfarm 12" i3v by Pitaven

...ith the arch up and support material under the bridge shape. it worked out pretty good but it may be better printing on its side.

thingiverse

free

MakerFarm i3v RAMPS cooling fan by cperiod

...s is a simple clip-on fan mount which snaps onto the plywood with just barely enough clearance for the z axis wheel to move past.

thingiverse

free

Parametric Makerfarm Prusa i3v micto adjustable Z stop. by zapta

...witch, search digikey for snap action limit switches with low differential travel but the stock switch of i3v works great for me.

thingiverse

free

very simple adjustable Z Endstop (MakerFarm Prusa i3v) by Labrication

...hingiverse it's a simple adjustable z endstop. deutsch: ein sehr einfache möglichkeit die höhe des z endstop einzustellen.

thingiverse

free

Bowden adapter Makerfarm i3V with e3D nozzle by Thunter124

...ruder, e3d hot end, and some models i created around them. should have anything you could need to edit my models or make your own

thingiverse

free

Makerfarm Prusa i3v Spool Holder Extension by BigBadBison

...ol holder. additionally, i have uploaded a top piece with a cut for those rolls that have the filament coming through the center.

thingiverse

free

Spool Mount Smoother for MakerFarm Prusa i3v by neonpolaris

...ol to turn more smoothly. it's not a wheel bearing, but it's super easy to make and has made a marked improvement for me.

thingiverse

free

Makerfarm i3 i3V Prusa i3 Filament Holders by 3Dg3o

...makerfarms and figured i'd share. went with an industrial look. i mirrored the second one so both had the detail facing in

thingiverse

free

Prusa i3v Y-Axis Belt Tensioner by KwikFiVo

...erratic behavior from the printer discontinue use and post a comment. if you have any suggestions let me know! thanks, -bob

thingiverse

free

Vibration Isolator Foot for MakerFarm Prusa i3v by acdawg

... instead of purchasing the sorbothane bumpers. version 2 added with clough42's original design for slot that wood snaps into.

thingiverse

free

Makerfarm i3v Spool Holder by medoix

...u can use anything 8mm to hold the spools, i just bought some 8mm x 30mm wood from trhe hardware store ($3) and it works a treat.

thingiverse

free

Makerfarm Prusa i3v one tool leveling bracket by zapta

...old size, the opening angle of the two side walls or the radius of the hotbed ears. this little part makes bed leveling a breeze.

thingiverse

free

Smoothieboard X5 v1.0a frame for MakerFarm i3v by Printbus

...n the design reflects dimensioning for the arduino mega2560 board, not the incorrect hole placements observed on the i3v printer.

thingiverse

free

Lowered BLTouch Fixed Position Mount for Makerfarm i3v by charlieray

...pin 3mm for better nozzle clearance while probing. modified to try and prevent nozzle goo sticking to the bed during g28 and g29.

thingiverse

free

RRD 128x64 GLCD mount & frame for MakerFarm i3v with Smoothieboard by Printbus

... to the rear instead of downwards, mount modifications for use with makerfarm i3v printers, added provisions for the rear cover.

thingiverse

free

Improved Makerfarm i3v Bed Leveling Clips by theP13RC3

...ttached is for the 12" makerfarm i3v, so it may not fit your buildplate! sliced in simplify3d, so it's nice and clean :)

thingiverse

free

Makerfarm Prusa I3V Extruder Tool by zapta

...fault thickness of the tool is 5mm. if you want to tweak any of the dimensions click on the open in customizer link in this page.

thingiverse

free

Itty Bitty Double Extruder (with mount for MakerFarm Prusa i3v) by clough42

...ead: http://3dprintboard.com/showthread.php?6165-marlin-firmware-fork-for-makerfarm-i3v-w-auto-bed-level-amp-roxy-s-enhancements

thingiverse

free

Makerfarm Prusa i3V spool holder by zapta

...d regenerate the stl files in openscad. my printer has 8" x 8" hotbed but i think it should work with all i3v versions.