75 Cobblebot 3d models found
Download or buy, then render or print from the shops or marketplaces.
3D Models below are suitable not only for printing but also for any
computer graphics like CG, VFX, Animation, or even CAD. You can print these 3d models on
your favorite 3d printer or render them with your preferred render engine.
Please note that the 3D model database is only a Search Engine. You should
visit the original websites. Most of the models can be easily imported and rendered
with Autodesk 3ds Max, Maya, Blender, C4D, and Sketchup. Check for online
3d model conversions tools for your file format.
thingiverse
free
Cobblebot rises by NucleoBLAST
...cobblebot rises by nucleoblast
thingiverse
the pieces of the new cobblebot revolution.
thingiverse
free
Cobblebot LCD Box by Linax
... i got from cobblebot didnt fit the lcd so i designed a box for it.
can be monted on the bottom 60mm or on any of the 20mm rails.
thingiverse
free
Cobblebot X-Axis by t3pnarcosis
...ted a smaller version of the cobblebot x block. still has a strong design at about half the size, no need to use shims or spacer.
thingiverse
free
COBBLEBOT Z MOUNT by Andreascha78
...h on z axis on the cobblebot, and relocates the lead screw bushing closer to the frame.
results may vary according to your setup.
thingiverse
free
Cobblebot Roller Bearing Shims or Washers by Mapembert
...d on assembly here:http://suburbnerd.blogspot.com/2015/11/cobblebot-roller-bearing-fix-with-3-d.html
https://youtu.be/_95jtjwnvda
thingiverse
free
cobblebot cable mangement m5 by cyde
... basic, but can be used anywhere a m5 bolt can be used.
scad files provided so people can tinker.
can be printed with no support.
thingiverse
free
Cobblebot Indicator holder by t3pnarcosis
...cobblebot indicator holder by t3pnarcosis
thingiverse
i used this with a harbor freight indicator to help level out my bed.
thingiverse
free
Cobblebot Proximity Sensor Mount by mbarry8859
...mple to mount my blue tip prox sensor to my cobblebot v2. there are others out there, but i wanted one that fit a little better.
thingiverse
free
Cobblebot Endstop by cyde
...bolt needed to the 20x20 frame
and 2 m3 bolt/nuts to attach the endstop board.
its quick and dirty but works (mounted both ways).
thingiverse
free
Arduino Holder for CobbleBot Vanguard by ThorMJ
...posts that go through the arduino are tapered; if you slice at 0.2 or 0.3, the arduino will lock in place when you press it down.
thingiverse
free
Cobblebot Arduino Ramps Mount by Linax
...cobblebot arduino ramps mount by linax
thingiverse
a plate to mount the electronics board to the v-slot rail.
thingiverse
free
Cobblebot Proximity Sensor holder by WhiteRatDriver
...riage.
the sensor bolts onto the underside of the x-carriage using one of the through bolts that is used for the belt attachment.
thingiverse
free
CobbleBot Z Axis Alignment by JonnyP
...o print.
cobblebot z axis alignment 0.5 is the most current & most likely the final revision.
https://youtu.be/r8_fyubojhg.
thingiverse
free
Cobblebot - Chimera Mount by dushu
...and 4x 20mm m3 lock nuts to install the plate to the mount.
you also need 3 x 16mm m3 screws to install the chimera to the mount.
thingiverse
free
Brackets for my redesign of the Cobblebot Vanguard 3d printer by Eirikur
...designed for my redesign of the cobblebot vanguard 3d printer. this work is still in progress and i have not yet tested the parts
thingiverse
free
Cobblebot Idler Spacers/Shims by nico0807
...r have wobbly idlers or fully fixed ones because of the bearings sleeves end outer rings being pressed against the mouning plate.
thingiverse
free
Droodles Cobblebot Hexagon Fan Shroud by droodles
...thing:945714 http://www.thingiverse.com/thing:796756
they are modified versions of this:http://www.thingiverse.com/thing:972473
thingiverse
free
Cobblebot GT2 Belt Coupler by furicks
... a hole and tapped with a m5 x 0.8 thread. then screwed the short m5 mounting screws through the hole directly into the carriage.
thingiverse
free
Cobblebot Y Belt mount by cyde
... vendor provided solution(ugh).
i printed my in pla, but mostlikely will change to abs and or casting in aluminium at some point.
thingiverse
free
Vertical Cobblebot GT2 Belt Coupler by furicks
...bot kickstarter kit.
i recommend using the "tall vertical coupler" as it puts the belts in a more consistent position.
thingiverse
free
CobbleBot Little Monster Dial indicator mount by KaTZWorld
... gantry and allows you to move the gantry around to check for level
the dial indicator is a fowler that has a 9.5mm diameter neck
thingiverse
free
Cobblebot Z Axis by xotonashix
...ething else if you screw the screw in it will go in i wanted it to be a very thight fit this is no issue
sorry for my bad english
thingiverse
free
Cobblebot E3D Chimera/Cyclops Mount by twhiting16
...s is a work in progress so any suggestions are welcome! within a couple days i should have the design finalized and ready to go.
thingiverse
free
Cobblebot print head wire holder by mkopack73
... motor). this model assumes you mounted the y motor on the right rear side of the y rail (while facing the front of the printer).
thingiverse
free
Cobblebot Hotend Mount by irononreverse
...takes two 40mm fans for hotend and part cooling and uses m3 nuts and bolts.
i've also included a belt clamp for the x axis.
thingiverse
free
Z-probing Mount for End Stop Switch - Cobblebot by Fzzymike9
...ave any questions i will do my best to answer this is my first part uploaded to thingiverse so please have some patience with me.
thingiverse
free
CobbleBot Heatbed Table by FoL
...orld.full.of.lifehttps://twitter.com/fulloflifeplhttps://pl.pinterest.com/worldfulloflifehttps://www.instagram.com/mindfulloflife
thingiverse
free
CobbleBot Accessory Mounting Plate by CthulhuLabs
...o make changes.
edit: added a top mount version which should line the bottom of the holes up properly for my further accessories.
thingiverse
free
Cobblebot end stop mount by eric_s100
...screws can be used for mounting, might be a little long, a thin was will help if needed. will also work on openbuild 20mm rails.
thingiverse
free
Top corner filament spool holder for cobblebot by siehputz
...ts in the grooves. note that the scad model is 'right side up'; you will want to rotate it down 180 degrees for printing.
thingiverse
free
Cobblebot dual extruder by azndud3
...s untested. support are included.
updated bltouch 2 has been added with dual fan support. it will need supports to be generated.
thingiverse
free
Timing belt mounts for Cobblebot by rafiki270
... on my old printer i found that the holes for m3 tightening (closing) holes are too small so i used a drill to clean them nicely.
thingiverse
free
Cobblebot Little Monster Spool Holder by Phelps3D
... part with the washer and then nut. you can adjust it to the tension you desire so the spool will easily turn on the clamp parts.
thingiverse
free
Cobblebot end stop holder by Mervious
...o attach end stop to the holder and 1x m5x8 to attach the holder to v-slot rail.
revised to version 2 (at last): works better now
thingiverse
free
Cobblebot Little Monster Full Graphics Mount by Phelps3D
...so they wouldn't hit the extrusion. this should work on any 8020 extrusion, not just the cobblebot little monster 3d printer.
thingiverse
free
RAMPS 1.4 Case Bracket for 20mm V-Slot Rail for Cobblebot by MaxWondercorn
...n is to mount the box on the top side rail. the original thing has the openscad files if you want to modify the bracket further.
thingiverse
free
Simple fan mount (made for Cobblebot) by nico0807
...he heat break , not the print.
it's made for 30mm ones but by scaling and using shims you should be able to use a 40mm one.
thingiverse
free
CobbleBot XL Bed Strain Relief by ThorMJ
...s don't move.
remember to print this in a high-temperature plastic (i used abs) because this is right next to the heated bed.
thingiverse
free
Cobblebot Hotend Mount BLTouch Accessory by timeshell
...obe to nozzle y offset: -front +behind
#define z_probe_offset_from_extruder -1.6 // z probe to nozzle z offset: -below (always!)
thingiverse
free
Cobblebot Vanguard Remix on Steroids
...t app--the free web version is quite limited in the tools that are available, and the precision isn't as tight as other apps.
thingiverse
free
Cobblebot Basic dual blower print fan bracket by neveroddoreven
...imum position.
for this build, i used the following fan:http://www.amazon.com/brushless-cooling-computer-3d-printer/dp/b00thzk270
thingiverse
free
CobbleBot Horizontal X Axis Mod V3 for moving bed by tomtom2770
...ts and m3 screws. to hold the belt in place you can close the gap with another m3 screw.
designed by tim ogermann and tom cinbis
thingiverse
free
Cobblebot Little Monster RAMPS Case by Phelps3D
...s cases is they don't ever seem to leave you space for the wires. that is why the top portion is totally open in this design.
thingiverse
free
V-Rail hotbed levelling mount (not just for Cobblebot) by rafiki270
...hole, it's not a bad idea to clean it with a drill after you print it so the m3 screw doesn't get jammed while adjusting.
thingiverse
free
Cobblebot Little Monster X-gantry with BLTouch by blanius
...uch-auto-bed-leveling-sensor-for-3d-printers/x/5685841#/
bed level sensor
i've included a step file if you need to edit this.
thingiverse
free
CobbleBot X axis belt block by CthulhuLabs
...hers to get the height adjusted properly.
update:
check out this remix: http://www.thingiverse.com/thing:1072943 its much better.
thingiverse
free
Cobblebot Power Supply Electrical Contact Cover by timeshell
...est to bend them upwards and minimize the amount of wire inside by pulling the remainder out and wrapping around the wire guides.
thingiverse
free
cobblebot-vanguard-x-grantry by sumeth_dev
...truders give me a dimension. (width,height,length)
sketch up file : https://drive.google.com/open?id=0b_n-the8_yr6v01wsxrmcjnwbdg
thingiverse
free
Tall X belt tensioner for Cobblebot (remix of I3_2020 design by drewprice) by reasonablebeing
... always, you may need to slightly increase or decrease the build size depending upon the filament and printer that you are using.
thingiverse
free
Fan Mount used by Droodle for Cobblebot Mod by rab1069
...viewtopic.php?f=4&t=1657
credit goes to http://www.thingiverse.com/thing:945714 and http://www.thingiverse.com/thing:796756
thingiverse
free
Cobblebot E3D Chimera/Cyclops Mount Version 2 by twhiting16
... backpressure. a redesign for that is needed. also, there is no way of adjusting the fan mount. this has been updated as well.
thingiverse
free
Idler Pulley Conversion - 525 ZZ Bearing Cobblebot by furicks
...our printer is not producing mostly round circle or over extruding you might need to clean up the parts to get everything to fit.
thingiverse
free
CobbleBot Horizontal X Axis Mod by CthulhuLabs
...s i am having issues meeting tolerances on the x. i am including the sketchup files so you can make any adjustments you may need.
thingiverse
free
E3D Hot End Plate for Cobblebot by MaxWondercorn
...(not yet published) but the accessory bosses are the same.
also uploaded the freecad files so the boss hole size can be adjusted.
thingiverse
free
Idler Pulley Conversion - 608 ZZ Bearing Cobblebot by furicks
...our printer is not producing mostly round circle or over extruding you might need to clean up the parts to get everything to fit.
thingiverse
free
Cobblebot Vanguard Replacement Parts VOS by Tinkering_On_Steroids
...ousing for controller and lcd display. filename is controller30.stl.
recommanded infill is 10% with support structures enabled.
#
thingiverse
free
Rail Corner by PMorel
.... made a version of the corner that will slide right over the rail corners. the other version will allow the use of 3mm screws.
thingiverse
free
CobbleBot Horizontal X Axis Mod V3 by CthulhuLabs
... appropriate t-slot bolts for mounting. i added a chamfer to make pressing the bearing in easier. i recommend a c clamp for that.
thingiverse
free
Snapmaker Module Storage Box by PMorel
...r modules. the size just barely fit on the snapmaker build plate so i decided to print on my cobblebot's larger build plate.
thingiverse
free
Replacement paper tray for Magicolor 1600W Printer by ThorMJ
...d a large printer for this one (barely fits on my 12x12 cobblebot vanguard xl).
pla is stiffer than abs, so i'd go with that.
thingiverse
free
2020 End Stop Mount by CthulhuLabs
...ginal design files are included.
please note that i have not personally tested this thing yet. once i do i will update with pics.
thingiverse
free
Filament Wall Rack by PMorel
... rolls of filament easily. i printed pla at 205c with no support and 15% infill. this is around a 2 hour print on my cobblebot.
thingiverse
free
Experimental Chassis For GoPiGo version 1.0 (untested) by YorCongressman
...
i hope this makes someone's life a little easier, and i apologize in advance if any holes or brackets are just a little off!
thingiverse
free
Z-axis lead screw mount by cdyrssen
... screws as well. it allows for custom gear reduction via a timing belt loop to drive the lead screw from a nema 17 stepper motor.
thingiverse
free
TS 2020 Rail Carriage for Toranado, Prusa i3 Attachments by timeshell
...so with the links below.
$2 - http://paypal.me/timeshell/2
$5 - http://paypal.me/timeshell/5
$10 - http://paypal.me/timeshell/10
thingiverse
free
2020 V Rail Hexagon Hot End Carriage Dual Fan BLTouch Mount V1 by timeshell
...obe to nozzle y offset: -front +behind
#define z_probe_offset_from_extruder -1.6 // z probe to nozzle z offset: -below (always!)
thingiverse
free
Simple PSU contact cover by gjcoram
... pins. the original v1 uses a screw on the metal case of the psu. i print it top-side down so it doesn't need any supports.
thingiverse
free
3 Wheel 2020 Gantry for 24MM wheels by TacklessWookie
...ything else i've designed printed i can help. i specialize in hips and abs printing for strong parts. just send me a message.
thingiverse
free
Cobbllebot Vertical Mounted dual extruder by azndud3
...will need generated support
fat v3d support a 18mm sensor
dual v3 c 2 have the adjustment mounting hole switch for ease of access
thingiverse
free
Mini V Wheel Magnetic Carriage with BLTouch Mount by cdyrssen
...oks to fit well on the hotend carriage. i have set my z-offset to -1.8 mm when mounting to bltouch directly underneath the plate.
thingiverse
free
TS 2020 Rail Carriage for E3D Titan, Toranado, Prusa i3 Attachments V2 by timeshell
... been made 2mm larger in v5. this is probably the one you will want to use in most cases. if it ends up being too lose, try v4.
thingiverse
free
TS 2040 2020 Rail Carriage for Prusa i3 Accessories, Toranado by timeshell
...so with the links below.
$2 - http://paypal.me/timeshell/2
$5 - http://paypal.me/timeshell/5
$10 - http://paypal.me/timeshell/10
thingiverse
free
WeldingRod Bot: Exactly Constrained 3D Printer by Weldingrod1
...he prints. it barely makes any difference. i will put the belt back on, since i already have it in place, but its optional now!
thingiverse
free
Belt Attachment with Tensioner by CthulhuLabs
...nding on the side.
get the belt as tight as you can by hand.
adjust the 25mm bolts to push the round bar in tightening the belt.
thingiverse
free
Bowden Tube Clip by MaxWondercorn
... anyone is interested.
update:
this was designed for 4mm diameter tubing and the large tie-wrap has a cross section of 2mm x 8mm.