thingiverse

free

3inch Star by robosavvy

...3inch star by robosavvy thingiverse a 3inch star to hang on your christmas tree

thingiverse

free

The ButterFly 3inch Frame by Tarkux

...the butterfly 3inch frame by tarkux thingiverse just a new tougher version of my 3inch 3d printable frame .

thingiverse

free

Plant support 3inch pot by InsaneFish

...plant support 3inch pot by insanefish thingiverse this is a plant support made to fit 3inch net pots. h: 145mm w: 68mm

thingiverse

free

3inch hex frame with canopy by Jandre_fpv

...e with canopy by jandre_fpv thingiverse 3inch hex frame 3 inch props 1206 to 1507 motors made for nano fpv cam 20x20 fc and esc.

thingiverse

free

3inch fpv drone frame

...3inch fpv drone frame thingiverse simple lightweight fpv drone frame

thingiverse

free

NACA Duct to 3inch Hose for duct & brakes

... & brakes thingiverse naca duct to 3inch hose for duct & brakes as seen here:https://www.youtube.com/watch?v=nrv6kayzwkw

thingiverse

free

3inch hex frame with canopy by Jandre_fpv

... frame 1206 to 1507 motors 20x20 fc and esc 3 inch props i do suggest you cut the frame out of carbon fiber made for nano fpv cam

thingiverse

free

X-whoop 3inch by Xfoot

... 650-1050mah lipo 15mm lipo strap top plate screws: hex m3 20-30mm screws recommended: xt60 connector. xt30 is a bit to small.

thingiverse

free

3inch hose attachment by meetar

...y meetar thingiverse this connects a standard 80mm computer fan to a 3" hose, and fits makerbot m3 hex-head machine screws.

thingiverse

free

Donut 3inch ducts - new profile

...donut 3inch ducts - new profile thingiverse new duct profile. fast print. print as the last picture, no supports are needed.

thingiverse

free

Xwhoop 3inch by Xfoot

...zle 40-45°bed/ flow 112-114/ bed adhesion woodglue diluted with water 50/50 (pva glue) brushed on glass plate and let dry out.

thingiverse

free

3inch CineCat

...r camera mount 14 screws for standoffs print everything at 100% infill apart from gopro mount which i suggest being 25-50% infill

thingiverse

free

AMAX INNO Racer 3inch Antenna mount

...amax inno racer 3inch antenna mount thingiverse antenna mount for amaxinno racer frame 3 inch, with xm+ for best conection.

thingiverse

free

Ball Grip Pen Adapter 3inch by Flavoredcorn

...ip pen adapter 3inch by flavoredcorn thingiverse created to insert a broken off pencil or stylist. has a groove to place thumb.

thingiverse

free

GEPRC CineQueen 3inch Prop and Motor Guard (also fit other 3inch quad)

...d tighten the four bolts alternately to the same depth. below is a video of a flight with tpu guards.https://youtu.be/lc6pcz6pzro

thingiverse

free

3inch quadcopter propeller by Miles_JD

...es!!! infill: 100% layer: 0.1mm prop 3" for quadcopter 130mm with 5mm motor axis https://www.youtube.com/watch?v=_dymtpdxn1k

thingiverse

free

GPS mount for Aurorarc Mamfu 3inch Cinewhoop by szxegg

...lace the stock dji air unit upper mount with this one. still have easy access to sd card. designed for 18186mm gps (e.g. bn-180).

thingiverse

free

Donut 3inch ducts

.... rotate and print it flat. enjoy :) donut" 3 inch 140mm h-type frame kit from banggood:https://banggood.app.link/ixjy6sfh73

thingiverse

free

Motor clamp for FPV Motor 2-3inch by My_Room

...her grab >tpu,like other can be used for 5inch motors by resizing with slicing software. i think it's about plus 30-35%

thingiverse

free

GENERIC BELT CLIP v 2 (78mm - 3inch) by PARADOXICLES

...(78mm - 3inch) by paradoxicles thingiverse a generic belt clip, 78mm or 3 inches long, intended to fit 2 rows of molle webbing.

thingiverse

free

MicroLongRange 3inch unibody printable by GTR4N

...t can be printed in pla/pla+. 3mm thick top plate so it can be printed in pla/pla+. have also added 20x20 holes for middle stack.

thingiverse

free

12M lens adapter for Sony 1/3inch CCD Video Camera (FPV) by spu

... adapter for sony 1/3inch ccd video camera (fpv) by spu thingiverse it is designd to fit in the standard mount, glue it on there

thingiverse

free

PC-FI 3inch fullrange 으으 speaker encloser by Custormizer

...s for the magnets and work with 3 aux jack and contains hanger for it have a great time to make and pleasure to tune sound thanks

thingiverse

free

Armattan Gecko Propeler Guard 3inch by DeathShoot

...n fabriqué en tpu mais conviens aussi pour du pla. version 2 : sans fixation sur la frame version 3 : avec fixations sur la frame

thingiverse

free

Generative Design Cinewhoop (3inch) by kowloonfpv

...2 : https://fb.watch/4qhfo5y81v/ the improved design available herehttps://cults3d.com/en/3d-model/gadget/tpu-fpv-drone-cinewhoop

thingiverse

free

3inch racewhoop high profile duct by daoust301

...e for the xing 2203.5. with the hq props, you will get 0,6 mm clearance from the wall. you will need support to print the duct.

thingiverse

free

GEPRC CineQueen 3inch Quarter Guard & Landing Skid by JJangFPV

...ze is 9mm. caution : when tightening the bolts, do not tighten too hard and tighten the four bolts alternately to the same depth.

thingiverse

free

Batman handle 3inch screw separation by misskincaidxo

...cing of 3 3/4 space and my existing handles were only 3 inch so i shortened the distance to avoid any alteration to my cupboards

thingiverse

free

Double motor adapters for 3inch drones (12x12) by DroneDome

...ther two positions. i have created a smaller version to fit the right-front corner and the back-center. a m3-.50 nut is required.

thingiverse

free

GEPRC CX 3inch drone canopy by pavan123

...cam. for best results print it with 3 perimeters and 30% infill at 0.15 resolution with proper support provision during printing.

thingiverse

free

Monster Canopy for Toothpick Drones (3inch or above)

...int it on tpu with a very low speed for best results. update on 08/03/2020: a new look, with a more realistic monster appearence.

thingiverse

free

micro CT stand with c-legs (diameter 76.2mm or 3inches) by janpfe

... that is 3 inches(76.2mm) in diameter. the c-shaped legs allow for better support, minimizing shaking of the tube while scanning.

thingiverse

free

Gammawhoop - 3inch cinewhoop by MrDeepPurple

...they seems to be rigid enough to not to bend while flying. i used 3 perimeters and 20% infill to keep them stiff but lightweight.

thingiverse

free

OddityRC 3inch monolith nano toothpick frame accessories by OddityRC_Support

... stl files. now there's only an arm protector and a batpad in this project. later there will be tbs 915 nano t antenna mount.

thingiverse

free

Snapy - brushless Tiny Whoop 3inch top and bottom plate by tjkim93

...less tiny whoop. 4 bolts and 2 nuts are used for bottom plate fix. 2 bolts and 2 plastic hex supports are used for top plate fix.

thingiverse

free

Better Ducts for Reptile CLOUD 149mm 3inch Frame

...nside the printed ducts, i found a solution where you just use a plastic nut to hold the m2 screw in place... hope you like it...

thingiverse

free

mini drone 3inch props

... setup: motors fly tower 20x20 camera lipo 3s 450mah video test flying noob pilot :)2s lipo first testing video3s lipo test video

thingiverse

free

MF160 Quadcopter 160mm-3inch drone by mainframecn

...rops, lighter props than the ones in the picturesnylon standoffs 35mmnylon m3 screws 3s is more fun to fly, 2s is a bit sluggish.

thingiverse

free

1S Optimized Canopy 3inch Toothpick/Babytooth by 24kJames

...tures, and nice aesthetics, for mounting a caddx ant to your babytooth, whoop, or other 25.5mm mount spacing multirotor/aircraft.

thingiverse

free

GEPRC CineQueen 3inch Prop and Motor Guard V2 - no propwash by JJangFPV

... v1 users can refer to pictures and cut 5mm from the top of a portion of the side close to the fc(one-third of the total circle).

thingiverse

free

1S Optimized Canopy 3inch Toothpick/Babytooth by 24kJames

...tures, and nice aesthetics, for mounting a caddx ant to your babytooth, whoop, or other 25.5mm mount spacing multirotor/aircraft.

thingiverse

free

Durable FPV Mini Quad 150 3inch to 4.5inch prop by Jazz0u

... /!\ final edit ! the quad is finished and fly well ! really powerfull with 4s batterie. picture of the finished quad uploaded =)

thingiverse

free

Captain Marvel Sash by Searoc

...captain marvel sash by searoc thingiverse this id a 3inch round not so high sash

thingiverse

free

3" Prop Guard Light by sharpwest

...3" prop guard light by sharpwest thingiverse prop guard for 3inch quad

thingiverse

free

3inch frame for 1103 (3 holes) CRF4 PRO V3 crsf by Getenforce

...ни не влияют). рама довольно жесткая и упругая, весит немного. я использовал эту канопу https://www.thingiverse.com/thing:3944156

thingiverse

free

Lollipop Mount Diatone taycan by Oscarem296

...lollipop mount diatone taycan by oscarem296 thingiverse simple but effective clean lollipop mount for the diatone taycan 3inch.

thingiverse

free

Diatone Taycan - caddx Vista mount by moonberry

...diatone taycan - caddx vista mount by moonberry thingiverse simple mount for caddx vista to diatone taycan 3inch drone.

thingiverse

free

Misc Parts (motor guard, VTX Mount, Buzzer Mount) for Realacc Martian IV 140mm 3inch frame by pathfinderzero

...x - r-xsr runcam micro eagle dal cyclone 3056 props battery gnb 3s 850mah (i get 3min - 6min depending on how aggressively i fly)

thingiverse

free

Mold for 3inch compliant wheels

...ing and pulling until you can get hold of one of the spokes and pull the wheel free. there you have it! your own compliant wheel!

thingiverse

free

Flight One big deal dual cap holder by azdarknet

...ght one big deal dual cap holder by azdarknet thingiverse dual 8mm cap holder for the raceflight / flightone bigdeal 3inch kwad.

thingiverse

free

LCD Hood by BNW

...lcd hood by bnw thingiverse lcd hood for sony hdr- pj 260 video camera and will fit a large range of 3inch lcd screens.

thingiverse

free

Phil and Teds Improved cupholder - 3inches for large water bottles by deckernico

...eps the pin from falling out. i use a long m3 screw, that way the ridges catch on the hole and won't slide out (just incase).

thingiverse

free

Zodiac_Quad by mistikkilic

...erse zodiac quad 1306 brushless motor, 18a esc, 1300mah lipo, naze32, 6ch transmitter, 1pcs 3inch and 4pcs 4inch prop recommend.

thingiverse

free

Lord Helmchen by Netfusion

...uot;lord helmchen" is a 120mm size fpv quadcopter with 3inch props and a weight of about 235g with 4s 850mah and 1306 motors

thingiverse

free

12M lens adapter for Sony 1/3inch CCD Video Camera (FPV) by IdefixRC

... 26/6/2014: added a slim version of the mount to support additional cameras. please feedback in case it does not print properly

thingiverse

free

Pokeball, with magnetic clasp by 3DCentralVA

...you can catch them all! provided they all fit inside a 3inch diameter ball :) available for purchase via http://etsy.me/1smvomb

thingiverse

free

FPV Drone Wall Hanger by s3nf

...mple wall-hanger for your kwad. should fit the most 5inch frames down to 3inch mayby 2inch print with pla, no support, 25% infill

thingiverse

free

iphone stand/ amplifier by WonderfulWaffle

...re length-9.5 inches depth-3inches there is a hole for the charging cable, and one to amplify the sound you may sell the idea

thingiverse

free

IFLIGHT TITAN H3 GPS 280 by Rhizamax

...cial command for iflight titan h3 3inch. it's a soft mount for the gps is a beitian gps module bn-880 (28mm x 28 mm x 10 mm).

thingiverse

free

3 inch (r349) frame and "winter" canopy by lexusspbru

.... basicaly on r349 hole dimensions. canopy for 12mm lens. vtx akk race 200mw. iflight/diatone 20x20mm stack +alternativ race cage

thingiverse

free

Blow Dryer Wall Hanger by GWynand

...d for 1/4 inch screws and the hoop is ~3inches. let me know if you have any questions or run into issues or have any suggestions.

thingiverse

free

DJI FPV AirUnit mount for GEPRC Cygnet 3

...prepare m2 6mm studs. you need to mount fc and esc separately. (you might need to rotate fc direction by betaflight configurator)

thingiverse

free

Undersink Compost Ziploc bag holder by mroberte

...e to accommodate up to a 3inch box. can hold ziploc bag boxes too. predrill screw hole when mounting so it doesn't separate.

thingiverse

free

3 Inch Canopy (Square of 31mm) by Wizzl

...lacing of a led stripe on top. ps: if you´re donwloaded this one, please leave a comment and tell me your opinion. thanks dude =)

thingiverse

free

Double-Bass Transport Wheel v1 by Kelvin226

...10cm wheel ( 100mm /24mm/8mm/608zz) x2 : 8mm x 3inch screw x2 : small screw x16 : 30cm x 12cm board x1 for every double-bassist ~

thingiverse

free

Japalura 3" Wall Mount by SkyTroll

...ave a template for screw placement. fully parametric model, so if you want any particular size or text just drop a comment below.

thingiverse

free

Contraptor - NEMA 17 Stepper Motor Mount by ril3y

...ore photos at my flickr:http://www.flickr.com/photos/31697990@n00/sets/72157622475596037/ or at my blog.http://blog.synthetos.com

thingiverse

free

155 hex frame (hexacopter) by thumbs_fpv

... a full size cam+ flight controller. you need a m3 screw+ 30mm spacer. it does have 3 mounting holes for different kinds off vtx.

thingiverse

free

DIYBIO Microscope Slide Holder by sztech

...75mm x 25mm x 1mm overall size: 3inch x 3.18inch x 0.33inch if you have any issues or requests, please feel free to contact me.

thingiverse

free

iFlight ix3 softmount + motor protector by Whitegollum

...ress.com/item/iflight-racer-ix3-130mm-fpv-racing-quadcopter-frame-compatible-3inch-prop-and-1306-motor-f4-flight/32781053916.html

thingiverse

free

120mm to 76mm exhaust adapter with Screw by brohrich

...a screw to fit into a air intake pipe, 76mm 3inch universal car cold air intake inlet pipe. primarily used for sim racing setups.

thingiverse

free

TOOL BOX

... a 2mm diameter pin. use tight-fitting roll pins at each end of the pin to retain it. post a build picture if you make it please!

thingiverse

free

Ducts for AlfaRC Cineboy by TheCoracle

...props, they fit snug and reduce the noise. i don't have an accurate way of testing the thrust so will make no claims on that.

thingiverse

free

Razor Stand by APdesigncollective

...s, though next one will probably try standing correctly with supports for the top v. printed with abs on monoprice maker select.

thingiverse

free

Micro Alien 3" lollipop stick by kevC9

...ngiverse.com/thing:575902 frame: https://www.amazon.com/gp/product/b07dwqdjnq/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1

thingiverse

free

Naked Gopro mount for whoop boards (26x26mm) by osliang

...ra in the front. print in tpu, 20%-50% infill. it needs a 20mm m2 bolt, and a m2 locknut to install the camera mount in the base.

thingiverse

free

Micro Martian IV 3" lollipop stick by kevC9

...ngiverse.com/thing:575902 frame: https://www.amazon.com/gp/product/b07mkg5fx5/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1

thingiverse

free

LEX 35mm film digitizer/scanner v2 by bostwickenator

...ews for fine tuning 2x 3mm screws and nuts to springload the film carrier\ 2x springs, size not critical pen springs should work.

thingiverse

free

Table Saw - T-Track for jigs by binary_0

...as long as your printer will support. 1inch takes approx 24 minutes at 100% infill. 3inch takes approx 54 minutes at 100% infill.

thingiverse

free

Blow Dryer Hanger V2 by GWynand

.... should be more sturdy. both work just fine but this one should hold up to more weight. i recommend 100% infill on both designs.

thingiverse

free

adjustable camera mount for ZMR 250 and 38mm SONY CCD camera by fehertamas

...tand is adjustable between 0° and 20°, and it locks with friction. it's very rigid, and doesn't come loose during flight.

thingiverse

free

cinewhoop by shakzool

.... updated design 3inch whoop frame and lid. added cutouts for motor wires. added vent holes for lid. https://youtu.be/1avpcynjpw4

thingiverse

free

BristerMeast - 3 inch racing drone frame

...ent; i used xt-cf20. 4 perimeters, 5-7 top and bottom layers, and about 50% 3d infill. my build weighs about 130g without a lipo.

thingiverse

free

CNC T-Slot Hold Down

...ich seems to fit the slots perfectly. i used a 3inch bolt but it is a bit long. you also need a hex nut and washer or wing nut.

thingiverse

free

Foam Anvil by Flibblebot

...ve, so i decided to make my own instead.i've built in a support for a standard 1" (~25mm) round dowel to hold the anvil.

thingiverse

free

Floater cover

...4 washers to screw down the cover. i was not able to test if its waterproof until yet, but i will update this thingi if necessary

thingiverse

free

Stamp Holder with Vee by woodturn1918

...won't allow rolling. happy with the quality of the print although a bit too tight on the stamps. i used fusion 360 to remix.

thingiverse

free

Micro drone starting block foldable by Prangu

... složitelný do roviny. materiál k sestavení: 2x m3x8 šroub (připevnění podpěr k ramenům) 2x m3x10 šroub (připevnění ramen k bázi)

thingiverse

free

Mooselander Picture Ledge Shelves by FarrisGoldstein

...hem together to get the desired width. i haven't actually printed these yet, but they should print just fine without support.

thingiverse

free

Audi A4 B8 Replacement dash speaker grill for 3 inch mid by LV-426

... you prep after test fit ... use heat to put a slight bend on the back edge of the print so it slips down parallel to the screen.

thingiverse

free

3S Lipo Battery Holder and Guard by Imozeb

...201707"here check out my micro fpv youtube videos for cool tricks/proximity flying with stick overlay, how tos, and reviews!

thingiverse

free

Fly4image - FPV Race Course Marker (Multi-Size) by francisLM

...design and want more great projects? donate a dollar or two to help order future supplies and creations :-) http://bit.ly/2qquoq0

thingiverse

free

Canopy for Brickracing SB3 Ultra

...ou see fit. print in tpu. supports on, 2 perimeters, 25% gyroid infill on 0.4mm nozzle. my print weighs 8g and feels super rigid.

thingiverse

free

The Pushy Hawk (Emax Babyhawk r Evolution)

...ink/dkm3aiffgt m2 screws https://www.banggood.com/custlink/gdmdsi71he foxeer falkor https://www.banggood.com/custlink/3kkvsjk6mj

thingiverse

free

3 inch bi-blade propellers for FPV drones with Ø5mm mounting hole - Proto D8b

...get more and newer propellers you can subscribe to my newsletter:http://zx-rc.blog/ i will share most of my designs. cheers zx-rc

thingiverse

free

French Cleat Bin by jeffreyk

...g with the glue up. super glueing the whole cleat on should give plenty of strength for holding anything you can put in the bins.

thingiverse

free

3" Cutting Wheel Disc Case for Angle Grinder and Sanding Paper by Perinski

... photo video accessories gadgets • accessories knobs • other

thingiverse

free

Flying Peach - 1407 by Babouch

...ir precious help and printing of the prototype https://www.thingiverse.com/microdure/about https://www.thingiverse.com/brax/about

thingiverse

free

Hamster Wheel (Silent Spinner) Mount by Bogdan87

... of your happy hamster if you make one of those :) for more interesting projects, please visit my blog:http://www.bogdanberg.com/

thingiverse

free

Smartspeaker by Lines11

...crews and nuts, m3 screws and nuts, 3mmx5 diameter wood screws here is a small video: https://www.youtube.com/watch?v=iet2sp4hxtq

thingiverse

free

Minibot Ultra 3D Printer (ERRF2019)

...r showing my work to everybody. new 3dp designs are always coming. i will probably attend mrrf 2021. cheers, pauloblank@gmail.com

thingiverse

free

Tough_Enough 3" HD by Custom_FPV

... hope i covered everything. let me know if you need any small changes (e.g. hole pattern motors) or cut / printed parts (europe).

thingiverse

free

Portable MP3 Player-Power Supply-USB Charger-Bluetooth Speaker by s3rkan

...ring-connector-3-pin-conductor-terminal/32845923996.html charger socket and banana sockets are directly connected to the battery.

thingiverse

free

Flying Peach - Microswift Evolution by Babouch

...ir precious help and printing of the prototype https://www.thingiverse.com/microdure/about https://www.thingiverse.com/brax/about

thingiverse

free

Bluetooth Speaker - Quarter Wave Transmission Line by GaminGit

...-for-cctv-p-952843.html?p=49240852445016202009&custlinkid=1296652 i would love to see someone print this in a wood filament!!