thingiverse

free

TURNIGY NANOTECH 2S 300MAH LIPO CASE by giek2000

...turnigy nanotech 2s 300mah lipo case by giek2000 thingiverse case to store 5x turnigy nanotech 2s 300mah 45-90c lipos.

thingiverse

free

Furious FPV Moskito 70 Battery Mount 300mAh by Grandthinker

...battery mount 300mah by grandthinker thingiverse remixed to accommodate larger battery (300mah). tub is 10mm deep by 16mm wide.

thingiverse

free

Newbeedrone Hummingbird Brushless F4 Pro Case w/ 300mah Gold Batteries by Footr

...teries by footr thingiverse case for newbeedrone hummingbird f4 pro brushless and storage for 10 300mah nitro nectar gold packs.

thingiverse

free

Emax Babyhawk Turnigy 2s 300mah Battery Support by ta5jda

...emax babyhawk turnigy 2s 300mah battery support by ta5jda thingiverse a support to better locate the battery, printed in tpu

thingiverse

free

US65 PRO DE65 PRO 65mm 2s 300mah no-cuts battery holder by Xan86

... modify the frame. just snap in place. consider replacing et2.0 connectors with an xt30 for practical reasons or make an adapter.

thingiverse

free

Mobula7 1S 300mah Clip In Holder V3 Frame

...frame thingiverse couldn't find one, so i made my own and want to share it. as always feel free to ask in german or english.

thingiverse

free

Moskito Battery Holder (Turnigy 300mAh Remix) by VilosCohaagen

...ortened the connectors a bit and made a slight angle so they snap in easier. also they are made for turnigy 2s 300 mah batteries.

thingiverse

free

Mobula7 Mobula Battery Holder RaceDayQuad 300mAh 1S

... more stable without the shifting weight. print in tpu. have to squish it a bit to install but once installed, it is not moving.

thingiverse

free

EMAX Babyhawk - Small (300mah) battery holder mount sleeve adapter thing by Katostrofik

...t fit using a flexible filament. i used sainsmart tpu. and the battery could still come out (or partially slide out) in a crash.

thingiverse

free

BT2.0 conversion cap for GNB 300mah 1s LiHV Battery

...em off. this is a replacement cap if you're so inclined to replace the jst ph connector with the new betafpv bt2.0 connector

thingiverse

free

83mm frame 16mm stack by the_mighty_tibo

...frame. designed for the turnigy nano tech 300mah 2s batterieshttps://hobbyking.com/nl_nl/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html ...

thingiverse

free

The Dropstick airsoft m4 hpa stock by kewldude007

...thingiverse enough room for a polarstar fcu and a 250-300mah lipo, nothing...

thingiverse

free

BetaFPV Meteor65 450MAH adapter by CleverOcotpi

...thingiverse a sleeve that will clip on to the 300mah meteor65 battery sleeve, will allow you to use 450mah....

thingiverse

free

Drone Battery Tray by steelbunny500

...slots for 1s 450mah and 3 slots for 2s 300mah lipo...

thingiverse

free

Diatone GTB 339 battery holder

...versions a flat one and one for the gnb 300mah 3s .fits nice and secure with the original lipo...

thingiverse

free

16MM MICRO QUAD NANOTECH LIPO MOUNT by giek2000

...battery mount for micro quads. made for nanotech 2s 300mah lipos. print in tpu so it will fit 15/16mm...

thingiverse

free

1S LIPO Battery Holder by Sherlock_Ohms

...350mah, but i believe it may also work with 300mah 1s...

thingiverse

free

ARFun 90 Container by Colorado_CJ

...90 micro brushless fpv quadcopter. it holds 5 2s 300mah nanotech batteries and 3 spare props for each...

thingiverse

free

IxI by touchthebitum

...innova (furiousfpv) cam : banggood micro cam lipo : 300mah 2s props : furiousfpv 2435 weight : 50gr without...

thingiverse

free

All In One FPV mount (Portable)(AKK A5) by mdpautzke

...chose. akk a5: https://www.amazon.com/akk-transmitter-switchable-quadcopter-inductrix/dp/b073wv3hls/ref=sr_1_7?dchild=1&keywords=micro+fpv&qid=1605128911&sr=8-7 ta sc28: https://www.amainhobbies.com/team-associated-sc28-lucas-oil-edition-1-28-scale-asc20150/p577738 1s 300mah: https://www.amazon.com/gaoneng-300mahbattery-powerwhoop-connector/dp/b07l9rqnc3/ref=sr_1_6?dchild=1&keywords=1s+300mah&qid=1605132924&sr=8-6 vid:...

thingiverse

free

All In One FPV mount (Portable)(AKK A5) by mdpautzke

...chose. akk a5: https://www.amazon.com/akk-transmitter-switchable-quadcopter-inductrix/dp/b073wv3hls/ref=sr_1_7?dchild=1&keywords=micro+fpv&qid=1605128911&sr=8-7 ta sc28: https://www.amainhobbies.com/team-associated-sc28-lucas-oil-edition-1-28-scale-asc20150/p577738 1s 300mah: https://www.amazon.com/gaoneng-300mahbattery-powerwhoop-connector/dp/b07l9rqnc3/ref=sr_1_6?dchild=1&keywords=1s+300mah&qid=1605132924&sr=8-6 vid:...

thingiverse

free

Tiny Racer FPV drone by thral666

...all parts from banggood.com i use more battery, 220mah, 300mah and...

thingiverse

free

1S Lipo battery case by oldhui

...around: tunigy nano-tech 300mah and 500mah. their dimensions are: 300mah 30x20x7.5mm 500mah: 41.5x25.5x8.7mm i have made the spaces bigger...

thingiverse

free

Beta65 Pro Battery Hanger Extension

...the 550mah battery, indoors, versus about 2-3min on the 300mah it has endured some hard landings so far, and...

thingiverse

free

Battery mount for us65 pro by qubicllj

...this is 2s stacked battery ( 2 x 1s 300mah ) mount for 65mm whoop like us65 pro. note:...

thingiverse

free

Brushless Foldable Nano Quad 120mm by yopzolo

...quad based on arduinopromicro and multiwii runs on 1s 300mah for 5-6 min handled successfully a few dozen of...

thingiverse

free

Mobula 6 1S 350mah Transversal Lipo clip by GuiliFPV

...mobula. the lipo weights only 0,5gramm more than average 300mah lipos. challenge was, to mount it properly, because of...

thingiverse

free

qx90 brushed to brushless by karnaugh

...2035 4 blades prop ac800 receiver qx90 aio vtx 300mah 2s auw = 72.3grams flight time =...

thingiverse

free

case for 2inch quad by Witty420

...to motor with 2.5inch props has 8 holders for 300mah 2cell..4in bottom and 4 in the lid this is...

thingiverse

free

Ballist-X 115 Micro Kwad by kerst

...amp escs boldclash 25mw micro cam/vtx (split version) 2s 300mah 35c nano tech...

thingiverse

free

Electronics Bay for 6 inch rockets by ttabbal

...out features as desired for different electronics. links: https://www.mcmaster.com/catalog/94180a331 https://hobbyking.com/en_us/turnigy-nano-tech-300mah2s-35-70c-lipo-pack.html ...

thingiverse

free

Bigger Housing for Nitecore Tube by ballauf

...use standard lipos from little drones. i´m using a 300mah lipo now. you have to use the spacer for...

thingiverse

free

FPV Backpack by mrobbins

...from hobbyking i used: ts5832 tx fc109 camera nanotech 300mah 2s battery mine was 2.02 oz. as pictured tested...

thingiverse

free

URUAV UR85 Battery Holder by Kingmiwok

...right size anyhow for the 2s 450mah and 3s 300mah batteries i use with it. this design is conceptually...

thingiverse

free

SavageBee battery mount 2S by Masambi

...with the inlay you can use two nitro nectar 300mah the inlay is just placed in the cut out...

thingiverse

free

Mobula 6 HD - tinywhoop case with extra compertments by zima3d

...fit a small 6x 1s usb charger and 10x 300mah batteries or something else... hope you like the extra...

thingiverse

free

Bwhoop B03 BR0703 brushless frame by mrvanes

...1103 version. the batteryclip is designed to hold a 260/300mah 1s lipo. i had to move the programming plug...

thingiverse

free

16x16mm Twist-Lock Battery Mount For Toothpick Drone by WhaleFPV

...ive made expandable twist lock holders for... gnb 2s 300mah zop power 2s 450mah the base should be printed...

thingiverse

free

SENDHIT 100mm by Tarkux

...lite fc nano 3 1102 13500k / 18000kv 1s 300mah to 520mah gemfan t65mm / hq 65mm footageshttps://youtu.be/ja7qhxntnt8 print...

thingiverse

free

Baby bed lamp by ogaillard

...mini usb lipo battery charger module lipo battery 3.7v 300mah slide switches on-off ultra-bright white...

thingiverse

free

90 mm brushless quad, 20mm stack by the_mighty_tibo

...fits 11 sized motors with 8.5 mm mounting holes. https://hobbyking.com/en_us/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html assembly: -the receiver goes in the bottom. there is...

thingiverse

free

E011 case by dutchmonkey

...not work . also this will hold 16 b03 300mah 3.7 batteries. i managed to print the middle section...

thingiverse

free

Furious FPV Moskito 70 ESC Cover & Battery Holder by moebrowne

...stock model. the battery compartment is sized to fit 300mah turnigy nano tech batteries plus a little space for...

thingiverse

free

Mobula 7 Battery transverse clip => v3 by GuiliFPV

...hi, this is my clip to mount a 3s 300mah lipo from side to side. some lipos are just...

thingiverse

free

Brushless Micro Ducted Quadcopter Frame for 1103 Motors by mailmanfever

...flight controllerhttp://s.aliexpress.com/a6v7bm3e all in one camerahttps://banggood.app.link/yd8jazstbh br1103 motors 10000kvhttps://rover.ebay.com/rover/0/0/0?mpre=https%3a%2f%2fwww.ebay.com%2fulk%2fitm%2f263155988771 300mah 2s liposhttps://rover.ebay.com/rover/0/0/0?mpre=https%3a%2f%2fwww.ebay.com%2fulk%2fitm%2f262747275892 38mm propshttps://banggood.app.link/qnvzuuiwbh then just a micro dsmx...

thingiverse

free

HummingBee by Tarkux

...beeye camera gemfan tri-blades 31mm up to 40mm 1s 300mah hv nbd theres a 80mm version too but require...

thingiverse

free

Emax Micro Power System 1104 - FPV Quadcopter by ta5jda

...mounting in the same part. battery is the turnigy 300mah 2s. flies absolutely fantastic on stock pids for me...

thingiverse

free

TinyFix 0703 quadcopter by crysis_ps

...0703 br0703 15000kv motors hubsan 3-leaf propellers turnigy nanotech 300mah 45-90c...

thingiverse

free

Hobbyzone Champ UMX EDF bracket by Johnkit

...i didn't and have to keep the battery (3s 300mah pretty far forward. test before you glue in place,...

thingiverse

free

CF Stick Quad by Leesamn

...esc, vm275t camera and i'm now using an airblade 300mah 2s battery. update sept 14th 2017: uploaded final versions...

thingiverse

free

75mm ultralight Whoop Canopy V2 + Lipo Tray V2 by Tarboor-Engineering

...canopy here. the battery tray is for fitting 1s 300mah stick lipos. best weight to power ratio with a...

thingiverse

free

Squeezy by SiegelRacing

...up) , some old xmod wheels and tires, and 300mah batteries. we saved significant weight gluing the claws to...

thingiverse

free

Indy4 FPV by Pilotgeek

...have included two versions. one uses mcpx batteries at 300mah capacity, and another should fit standard...

thingiverse

free

Pink Stiffy by Davross

...mm motors, a recycled nano qx flight board and 300mah 1s lipos. it will take most of the 25...

thingiverse

free

Flipper battlebot/bluetooth controlled bot by teundedonder

...l298 mini h bridge female jst-xh connector turnigy nano-tech 300mah 2s 35-70c 7,4v lipo 2 ebowan n20 6v 500rpm...

thingiverse

free

Cruiser Whoop by njd13

...receiver integrated) auline 500mah 1s or 2 happymodel 1s 300mah (for 2s with jhemcu play f4 1-2s aio) ~43g...

thingiverse

free

[CC-00] tiny indoor fpv drone with 0603 brushless motor and 40mm prop by sys_er26

...camera&vtx: vm275t(with osd mod) receiver: fs-rx2a battery: turnigy nano-tech 300mah 1s 45c lipo known issues: for prop protection, prop...

thingiverse

free

RC Crobe micro-glider (wings and motor mount)

...joiner: 3mm rod, sanded a little elettric setup: 2s 300mah 6a esc motor, 10gr~, 2000kv~, (mount hole distance 16mm)...

thingiverse

free

Furious FPV Moskito 70 Battery Mount by AdamHelbing

...battery (13mm width, 16mm height. its this one from hobbyking:https://hobbyking.com/de_de/turnigy-nano-tech-300mah2s-35-70c-lipo-pack-e-flite-eflb2002s25-micro-series-compatible.html i added a more versatile simple mount, maybe its...

thingiverse

free

150g Horizontal Spinner Battlebot

...spektrum dx6 (https://amzn.to/2qk8rqa) battery: nano-tech 300mah 2s lipo pack (https://hobbyking.com/en_us/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html) ...

thingiverse

free

Light Gopro Hero 7 Mount for AIO boards by Unboxingexperience7

...here it is at 229 gram with a 3s 300mah lipo. the drone comes in at 82 gram, the...

thingiverse

free

TKS 80 by Tarkux

...easily get 5min flight time !!! lipo : 1s 300mah to 1s 520mah material of choice nylonx / carbonx...

thingiverse

free

PocketQuad by CJA3D

...0703 10000kv brushless motor. and i am using a 300mah 1s battery. here is a quick video demo of...

thingiverse

free

Single Guitar Pedal Board Battery Powered by n24re

...and be powered from batteries. as this pedal needs 300mah of power a regular 9 volt battery will not...

thingiverse

free

Burning Lightsaber Valve Parts by SufficientlyAdvanced

...was a fqp30n06l and the lipo battery was this: http://www.ebay.com/itm/2-turnigy-nano-tech-lipo-battery-1s-35c-70c-300mah3-7v-lithium-polymer-pack-a8-/142330421529?hash=item21238de119 ...

thingiverse

free

Micro Quad 1S Lipos Holder by RCConcepts

...packs such as the um series 1s packs, mcpx 300mah packs and etc. also, it could be resized easily...

thingiverse

free

150g Front Flipper Battlebot by emancarrillo

...spektrum dx6 (https://amzn.to/2qk8rqa) battery: nano-tech 300mah 2s lipo pack (https://hobbyking.com/en_us/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html) you can buy these wheels to save weight if...

thingiverse

free

Drosophila 80mm nano toothpick frame by Mard0

...the battery a little bit better. i've flown using 300mah batteries and 550mah batteries. 300mah is a lot lighter...

thingiverse

free

Toothpick frame 2.5" multiple mounting options sub 80gram

...v3.0 (with capacitor on xt30) fc r-xsr receiver gnb 300mah 3s batts eachine tx05 vtx+cam avan rush props all...

thingiverse

free

Squid Project

...find lol) (xm+, rxsr) propshttps://www.banggood.com/custlink/ggkk0mnwzt battery (for now only 300mah long 3s batteries fit, we will try to...

thingiverse

free

TKO90 for 20x20 by jakewells

...1102 7800kv motors and 2030 2in props on 2s 300mah hope you enjoy and please share your builds with...

thingiverse

free

Mike Drozowski by ataylor60

...tinyfish fc tinypepper 4in1 esc 4x br0703 15000kv motors 300mah 1s battery a set of 60mm qx90 propellers (green...

thingiverse

free

150g Grab and Lift Battlebot by emancarrillo

...spektrum dx6 (https://amzn.to/2qk8rqa) battery: nano-tech 300mah 2s lipo pack (https://hobbyking.com/en_us/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html) you can use other servos like the corona ds929hv...

thingiverse

free

1S Lipo Box by darren_bergen

...box lid to fit larger sized batteries like gnb 300mah larger lid can accommodate batteries of ~66mm of length....

thingiverse

free

Mini-z buggy mb-010 Brushless and electronics conversion by synco

...in series to achieve 7v (2s). lipo batteries: turnigy 300mah for losi. for assembly you need to trim a...

thingiverse

free

Tenth Doctor Sonic Screwdriver by 3D_Peeters

...led choice). material: blue led: https://www.banggood.com/fr/100pcs-20ma-f5-5mm-ultra-bright-blue-led-diode-p-1016053.html?rmmds=search&cur_warehouse=cn battery + charger: https://www.banggood.com/fr/5-x-3_7v-300mah45c-battery-with-1-to-5-charger-eachine-e55-fq777-fq17w-p-1149088.html?rmmds=search&cur_warehouse=cn button: https://www.banggood.com/fr/100pcs-tactile-push-button-switch-tact-switch-6x6x13mm-4-pin-dip-p-1018603.html?rmmds=search&cur_warehouse=cn resistance 220: https://www.amazon.ca/through-hole-carbon-film-resistors/dp/b008lt4wx8/ref=sr_1_2?ie=utf8&qid=1522536213&sr=8-2&keywords=resistor+220 super glue:...

thingiverse

free

honeybee by sean13

...205mah 25-50c 1s newbeedrone 210mah 30-60c 1s turnigy nano-tech 300mah 45-90c 1s i used these "white rubber 5mm open...

thingiverse

free

Swirlie - 64mm pico-sized Brushless Quad by TheShortCrayon

...-camera/vtx vm275t or your favorite micro aio vtx -battery 300mah450mah 2s-3s 65drones65drones amazon store https://youtu.be/isax-dcm-l0 3/4/2017 fixed the orientation...

thingiverse

free

150g Suplex Battlebots by emancarrillo

...dx6 (https://amzn.to/2qk8rqa ) battery: nano-tech 300mah 2s lipo pack (https://hobbyking.com/en_us/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html ) note: any micro servo will work, but you'll...

thingiverse

free

70mm Brushless Quad by cnr1089

...motor and rotorx (4 blades) get 72g. turnigy nano-tech 300mah 2s battery so far, everything but camera/vtx, and rx...

thingiverse

free

FT Boar Gremlin Frame by SP0NZ

...hyperion g5 2s 550mah 50chttps://store.flitetest.com/hyperion-g5-50cmax-2s-550mah-4-2v-max-lipo-battery/ hyperion g7 2s 300mah 50chttps://store.flitetest.com/hyperion-g7-2s-300mahsi-graphene-50cmax-battery-4-2v/ hyperion g7 2s 550mah 50chttps://store.flitetest.com/hyperion-g7-2s-550mah-si-graphene-50cmax-4-2v-battery-jst-connector/ props: emax t2345 3...

thingiverse

free

FT Gremlin Frame by Andres Lu by SP0NZ

...hyperion g5 2s 550mah 50chttps://store.flitetest.com/hyperion-g5-50cmax-2s-550mah-4-2v-max-lipo-battery/ hyperion g7 2s 300mah 50chttps://store.flitetest.com/hyperion-g7-2s-300mahsi-graphene-50cmax-battery-4-2v/ hyperion g7 2s 550mah 50chttps://store.flitetest.com/hyperion-g7-2s-550mah-si-graphene-50cmax-4-2v-battery-jst-connector/ props: emax t2345 3...

thingiverse

free

Angry Oskie Micro Quad Frame for 0703 0705 Brushless Motors by osliang

...amazon) "blue" 25c 500mah (banggood | amazon) nanotech 45c 300mah (hobbyking | amazon) losi battery connector (banggood | amazon)...

thingiverse

free

FT Gremlin Frame by Josh Bixler by SP0NZ

...hyperion g5 2s 550mah 50chttps://store.flitetest.com/hyperion-g5-50cmax-2s-550mah-4-2v-max-lipo-battery/ hyperion g7 2s 300mah 50chttps://store.flitetest.com/hyperion-g7-2s-300mahsi-graphene-50cmax-battery-4-2v/ hyperion g7 2s 550mah 50chttps://store.flitetest.com/hyperion-g7-2s-550mah-si-graphene-50cmax-4-2v-battery-jst-connector/ props: emax t2345 3...

thingiverse

free

FT Gremlin Frame by TJ Williams by SP0NZ

...hyperion g5 2s 550mah 50chttps://store.flitetest.com/hyperion-g5-50cmax-2s-550mah-4-2v-max-lipo-battery/ hyperion g7 2s 300mah 50chttps://store.flitetest.com/hyperion-g7-2s-300mahsi-graphene-50cmax-battery-4-2v/ hyperion g7 2s 550mah 50chttps://store.flitetest.com/hyperion-g7-2s-550mah-si-graphene-50cmax-4-2v-battery-jst-connector/ props: emax t2345 3...

thingiverse

free

Netsplit -- 150g Combat Robot (Fairyweight/UK Antweight) by xanderstrike

...but there is room for the easier to find 300mah batteries 1x fs2a 4 channel receiver -- the i6...

thingiverse

free

Micro Gentle Lady by N827TM

...12 amp esc / 2 amp bec battery: 2s 300mah li-polymer servos: 2 - k-power p0025 2.5g/0.8kg/0.07s/6v coreless plastic...

thingiverse

free

KevPV 2.0 1103 Brushless Frame by bernitz

...let me know! top cover and battery strap (for 300mah 2s nanotech battery) printed in...

thingiverse

free

Neptune 120 by INDEMEX

...hélices de 44mm de 3 palas. batería lipo 7.4v 300mah 25c. tiempo de vuelo aproximadamente 6 minutos. controladora de...

thingiverse

free

Tiny Whoop frame - 1S - 31g AUW by Kolosos

...combination with the new f4 aio fc) betafpv bt2.0 300mah 1s 30c battery rkh 40mm 3 blade props clear...

thingiverse

free

Wejfu - 1 pound plastic antweight combat robot by teamd20

...what i am currently using)https://www.amazon.com/gp/product/b07l36hncb/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=utf8&psc=1 this would work as well.https://itgresa.com/product/galaxy-300mah2s-lipoly-battery/ 4 #4 x 1/2 inch metal screws to attach...

thingiverse

free

Fully Printed 4WD Drift Car Chassis - 1:28 Scale by _AlexY

...length. ordinary pen springs are too stiff. venom fly 300mah 2s battery 1 small brushed esc, 2s compatible 1...

thingiverse

free

TKS by Tarkux

...18000kv h8 45mm props ph 2.0 solid pin 1s 300mah to 600mah quicksilver / emuflight / betaflight this frame...

thingiverse

free

Toad 110 - Micro FPV Quad - (8.5mm Hubsan X4 Motors) by charlesgershom

...bit weak if its fully loaded and switched to 260/300mah ...

thingiverse

free

Gnat QX by Davross

...the extra weight at the motors, stiffer frame and 300mah batteries bring the auw up to 35g, but eliminate...

thingiverse

free

Micro FPV Quadcopter 125 | 8.5mm motors and Micro Scisky by phiba

...flight controller (+ dsm2 compatible radio) 1s lipo, > 300mah 4x m3 screw, shaft lenght > 18 mm optional:...

thingiverse

free

UNBREAKABLE!!!! Kingkong Q90 90mm tpu cover 57gram take-off weight! For 2S Brushless FPV racing quad. by rcwingman

...https://www.banggood.com/super_s-f4-2s-flight-controller-built-in-betaflight-osd-super_s-bs06d-4in1-blheli_s-6a-esc-p-1168772.html?rmmds=myorder lots of turnigy nano-tech 300mah 2s 35~70c lipo packhttps://hobbyking.com/de_de/turnigy-nano-tech-300mah2s-35-70c-lipo-pack-e-flite-eflb2002s25-micro-series-compatible.html some 5 minute...

thingiverse

free

BBR 1/28 Basic Chassis by ByebyeRacing

...150mm for li-po batterieshttps://www.amazon.com/gp/product/b00wo3lmps/ref=oh_aui_search_detailpage?ie=utf8&psc=1 umx timber upgrade lipo batteries 7.4vhttps://www.ebay.com/itm/2x-umx-timber-upgrade-lipo-batteries-7-4v-300mah35c-high-performance-fast-frusa/263851579333?hash=item3d6ec797c5%3ag%3asrcaamxqno5tyw0m%3asc%3auspsfirstclass%2122153%21us%21-1&_sacat=0&_nkw=umx+beast+lipo&_from=r40&rt=nc&_trksid=m570.l1313 ...

thingiverse

free

Yet another useless box with Arduino and 5g servo by grafalex

...the servo. it is better to use lipo 7.4v 300mah ...

thingiverse

free

RC Airboat 200 by ByebyeRacing

...for li-po batterieshttps://www.amazon.com/gp/product/b00wo3lmps/ref=oh_aui_search_detailpage?ie=utf8&psc=1 motorhttps://www.amazon.com/gp/product/b073q2y3rc/ref=oh_aui_search_detailpage?ie=utf8&psc=1 umx timber upgrade lipo batteries 7.4vhttps://www.ebay.com/itm/2x-umx-timber-upgrade-lipo-batteries-7-4v-300mah35c-high-performance-fast-frusa/263851579333?hash=item3d6ec797c5%3ag%3asrcaamxqno5tyw0m%3asc%3auspsfirstclass%2122153%21us%21-1&_sacat=0&_nkw=umx+beast+lipo&_from=r40&rt=nc&_trksid=m570.l1313 ...

thingiverse

free

The Gamma - Printed in Place RC Car - version 1.8 by Under_Engineered

...want more power, go for any 2s lipo with 300mah or less (more mah might be a bit too...

thingiverse

free

BBR Pancar by ByebyeRacing

...mr-02/03 stock kits umx timber upgrade lipo batteries 7.4v 300mah 35c high performance all of my progress and projects...

thingiverse

free

Indestructible Tiny Whoop TPU 90mm 2S by Microdure

...sbus:http://www.banggood.com/fr/fd800-tiny-frsky-8ch-ppmsbus-receiver-compatible-frsky-accst-x9dplusdjtdftdht-for-qx95-qx90-p-1108071.html?rmmds=search?p=ld020411878172015024 receiver dsmx:https://www.banggood.com/fr/redcon-2_4g-dsm2-dsmx-satellite-receiver-with-code-key-for-jr-spektrum-transmitter-p-1102382.html?p=ld020411878172015024 propeller:http://www.banggood.com/eachine-fatbee-fb90-turbine-qx70-micro-fpv-racing-quadcopter-spare-parts-40mm-4-blade-propeller-set-p-1108674.html?p=ld020411878172015024 http://www.banggood.com/40mm-1_5-inch-1_0mm-hole-3-blade-bullnose-propeller-for-1103-brushless-motor-2-cw-2-ccw-p-1127320.html?rmmds=search?p=ld020411878172015024 lipo 2s 30mah 45-90c: https://hobbyking.com/fr_fr/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html screws and fixing nuts 4x m 1.6 16 mm...

thingiverse

free

Improved Tiny Whoop / Inductrix / E010 FPV frame 3 grams. by Yannicflight

...21grams. my setup: 6mm coreless motors 59000rpm, bee-core, 1s 200~300mah battery. for flight computers, i fitted the beecore_f3 but...

thingiverse

free

Anisoptera Racer by kolergy

...hold 1s 750mha v0.5 -> fuselage resize for 2s 300mah turningy bat v0.4 -> 9.8g -> fuselage resize, arm...

thingiverse

free

Betafpv Beta 65x 75x 85x case for 8 batteries by mattkins99

...beta65x and beta75x with space for 8 hobbyking nanotech 300mah 45c 2s batteries. included is the fusion360 file if...

thingiverse

free

OpenWhoop Parametric Micro Racing Multirotor Drone by Glasswalker

...battery from lfs, plan on swapping down to a 300mah or lower to reduce weight significantly. anyway, this is...

thingiverse

free

8 legged spider robot by Bribro12

...2 × 1 cell 300 mah lipo battery link: https://www.banggood.com/5pcs-uruav-3_8v-300mah4080c-1s-hv-4_35v-ph2_0-lipo-battery-for-eachine-trashcan-snapper6-7-mobula7-p-1405460.html?rmmds=search&cur_warehouse=cn 4 × linear micro servo i used 4 linear...

thingiverse

free

Mini FPV Rover by AdamHelbing

...pwm channels power: 1x battery: i use this one: https://hobbyking.com/de_de/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html but every 2s lipo will do which fits inside...

thingiverse

free

Mini RC truck chassis by CyanRC

...sanwa/airtronics 94809 micro servo 7.4v 2s lipo battery about 300mah (height<17mm length<43mm width<20mm) 30a brushed motor esc others parts...

thingiverse

free

Micro 105 FPV Quadcopter - 8.5mm Motors, Micro Scisky by punkkills

...of a few batteries. 380mah hubsan, 500mah hubsan and 300mah nano-techs caution: when using the nano-techs, make sure the...

grabcad

free

Lipo Battery 300mAH

...lipo battery 300mah grabcad lipo battery 300mah. step file and fusion 360 file.

grabcad

free

Turnigy Nanotech 2S 300mAh Battery

...turnigy nanotech 2s 300mah battery grabcad lipo battery model: turnigy nanotech 300mah 2s

grabcad

free

Generic Lithium 300mAh Battery

...generic lithium 300mah battery grabcad 3.7v 300 mah 4mm x 25mm x 30mm

cults

free

Indestructible Tiny Whoop TPU 90mm 2S

...tiny whoop: f.c. : http://www.banggood.com/fr/eachine-32bits-f3-brushed-flight-control-board-based-on-sp-racing-f3-evo-for-micro-fpv-frame-p-1076530.html?p=ld020411878172015024 coreless: http://www.banggood.com/chaoli-cl-820-8_5x20mm-2s-coreless-motor-for-90mm-150mm-diy-micro-fpv-rc-quadcopter-frame-p-1084265.html?p=ld020411878172015024 receiver sbus: https://hobbyking.com/fr_fr/turnigy-nano-tech-300mah2s-45-90c-lipo-pack.html receiver dsmx: http://www.banggood.com/fr/self-frequency-satellite-receiver-with-high-speed-support-dsmx-dsm2-11ms-22ms-p-1049330.html?p=ld020411878172015024 propeller: http://www.banggood.com/eachine-fatbee-fb90-turbine-qx70-micro-fpv-racing-quadcopter-spare-parts-40mm-4-blade-propeller-set-p-1108674.html?rmmds=search?p=ld020411878172015024 http://www.banggood.com/40mm-1_5-inch-1_0mm-hole-3-blade-bullnose-propeller-for-1103-brushless-motor-2-cw-2-ccw-p-1127320.html?rmmds=search?p=ld020411878172015024 lipo 2s 30mah...