Thingiverse
ZMR250 tilting Foxeer FPV camera mount by SnakeJayd
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a tilting mount for the foxeer XA T650M CCD 600TVL camera.
The angle is held by inserting screws into the back of the brackets.
There are 2 versions, the ones had the main bracket as a single piece, the other has it as two halves that are not connected. I found the separate version to be easier to get the camera loop part into.
The OpenSCAD files will be available on my dev blog, on the post that I wrote about this particular project.http://jaydlawrence.dev/zmr250-custom-tilting-foxeer-fpv-camera-mount/
Measurements
Pillar height: 34.8 mm
Locking screw: M3
Camera Barrel Diameter: 15.4 mm
The angle is held by inserting screws into the back of the brackets.
There are 2 versions, the ones had the main bracket as a single piece, the other has it as two halves that are not connected. I found the separate version to be easier to get the camera loop part into.
The OpenSCAD files will be available on my dev blog, on the post that I wrote about this particular project.http://jaydlawrence.dev/zmr250-custom-tilting-foxeer-fpv-camera-mount/
Measurements
Pillar height: 34.8 mm
Locking screw: M3
Camera Barrel Diameter: 15.4 mm
Similar models
thingiverse
free
ZMR250 fpv camera mount 15deg by corristo25
...thingiverse
i made a camera mount for zmr250.
i will fit all cameras simmilar to eachine 1000tvl which i use.
tilted 15 degrees.
thingiverse
free
ZMR250 FPV Camera Mount 0 Tilt by luodanli
...th a generic banggood cmos camera with 28mm hole spacing. this mount is designed for m2 x 6mm screws or 2mm self-tapping screws.
thingiverse
free
ZMR250 FPV Camera Tilt Mount (10, 15, 25 deg) by marcx
...cially designed to be used with cylindrical separators. extremely resistant.
there are 3 versions available:
10 deg
15 deg
25 deg
thingiverse
free
ZMR250 FPV Camera with integrated OSD and Tilt-Mount by yoshie1997
... the camera plate of a zmr250 with the tilt-mount but you can just break of the tabs of the camera housing and use it standalone.
thingiverse
free
Dart 250 camera mount with tilt by DmDe
...hd dart 250 wing
i use the foxeer razer micro camera and digital servo es9251
work in progress...
i need designed aerodynamic cap
thingiverse
free
ZMR250 FPV camera mount by ronald85
...zmr250 fpv camera mount by ronald85
thingiverse
a 50 degrees fpv camera mount for the popular zmr250.
thingiverse
free
Camera Tilt Mount ZMR250 (bg) - 25 degrees by straiki
...rse
fine tuning of this great mount for fpv camera to fit on zmr250 from banggood (it's slitghtly smaller than original zmr)
thingiverse
free
ELGAE FOV127 tilted camera mount for ZMR250 by destroyer2012
...enough for me.
uses small 2mm plastite screws for attaching the camera and bigger 3mm plastite screws for attaching to the frame.
thingiverse
free
ZMR250 FPV Cam for Eachine cam and 37mm Spacer by king_draki
...html
it will fit for 37mm spacer (only!!).
thickness of the mounting pins is 2mm.
use 2.2mm tap screws directly into the plastic.
thingiverse
free
FPV Board Camera Mount for Mini Quads by _AlexY
...20mm spacing that should fit the blackout mini-h/zmr250 or similar quad...
Snakejayd
thingiverse
free
Bell Siphon with Snorkel and Cup for Aquaponics by SnakeJayd
... now as a work in progress.
thanks to preston hackspace for the use of the ultimaker original 3d printer to test this design out.
thingiverse
free
Quail egg turner by SnakeJayd
...es a microserver to turn the eggs.
i have a full write-up of how it all works together and the code to power the servo on my blog
thingiverse
free
ZMR250 spacer for Naze32 rev6 by SnakeJayd
...rt hole positioned to work for the naze32 rev6.
i have a post on my dev blog website about how i designed this from the original.
thingiverse
free
ZMR250 spacer for Seriously Pro F3 flight controller by SnakeJayd
...ze32 rev6 with off center usb. this design is for boards with the usb in the middle of the side, like the seriously pro f3 board.
thingiverse
free
ZMR250 battery cage by SnakeJayd
...maker original
more details about the design on my blog post:http://jaydlawrence.co.uk/zmr250-quadcopter-protective-battery-cage/
thingiverse
free
Quanum V2 Goggle face plates by SnakeJayd
... you have any comments or suggestions on how to improve the design let me know, or feel free to take it and adapt it as your own.
thingiverse
free
Layens bee hive entrance cover by SnakeJayd
...re it is in action:https://youtu.be/0f2spzeked8
printing:
it is wide and flat, so no support needed.
i printed them at 15% infil.
thingiverse
free
Side-Mounted Headphone Stand by SnakeJayd
...can tweak it.
it is fully parameterized, so you should be able to just tweak the values and it should all just scale accordingly.
Foxeer
thingiverse
free
Foxeer Standard / Mini Predator 4 lens protector by yotta72
...foxeer standard / mini predator 4 lens protector by yotta72
thingiverse
foxeer mini predator 4 pvr camera lens protector.
thingiverse
free
FlyFive33 Switchback Foxeer Toothless 45 Deg by MixedSignals
...ve33 switchback foxeer toothless 45 deg by mixedsignals
thingiverse
my remix to shorten the camera mount for a foxeer toothless.
thingiverse
free
Atom by mrexcavator
...printed in tpu. edit: extra canopy and tpu-topplate for foxeer lollipop antenna. the frame has a recess for a...
thingiverse
free
sma puda x5 foxeer lollipop v3 by Blackfish_FPV
...sma puda x5 foxeer lollipop v3 by blackfish_fpv
thingiverse
sma puda x5 foxeer lollipop v3
thingiverse
free
GoPro 8 Battery door with FPV camera mount by GlobalCharming
...mount by globalcharming thingiverse i made this for my foxeer 19mm fpv camera to be mounted onto my gopro...
thingiverse
free
WildWilly Dolphin 1 Frame Lightweight Gopro Hero 8 3D Parts by enrico320i
...with stock antenna l shape mount, very good signal foxeer predator nano 4 1.8mm camera tattu r-line v3 1050mah...
thingiverse
free
ZOHD Dart 250g Nano Camera Mount by rcmodels
...for dart 250g. for cameras like caddx ant and foxeer razer nano. it's simple to adjust a camera view...
thingiverse
free
ZOHD Dart 250g Nano Camera Mount by rcmodels
...camera (14*14 mm) mount like caddx ant nano or foxeer razer nano to fit into zohd dart 250g. you...
thingiverse
free
Stratosurfer GoPro Hero7 and dual FPV camera mount by kdamon
...mount i made to hold a gopro hero7, a foxeer micro camera, and dji camera on a servo os...
thingiverse
free
foxeer pico canopy by ldqn
...foxeer pico canopy by ldqn
thingiverse
20° canopy for foxeer pico razer bb like ;)
+30° version available
Zmr250
thingiverse
free
motor's wires arm mount for ZMR250 , QAV250 by Quack_113
...motor's wires arm mount for zmr250 , qav250 by quack_113
thingiverse
motor's wires arm mount for zmr250 , qav250
thingiverse
free
Bn-220 gps mount on ZMR250's arm by Quack_113
...ne so i cant link my model the model i took and remixed then im gonna put the link here
https://www.thingiverse.com/thing:3547332
thingiverse
free
QAV250 - VTX 30.5 mm X 30.5 mm mount by Quack_113
...thingiverse vtx (30.5mm*30.5mm) mount on the edge section of qav250,zmr250 ...
thingiverse
free
ZMR250 , QAV250 wire cover on middle section by Quack_113
...zmr250 , qav250 wire cover on middle section by quack_113
thingiverse
zmr250 , qav250 wire cover on middle section
thingiverse
free
ZMR 250 TBS Crossfire immortal T-Antenna holder mount by Ben___
...simple robust tbs immortal t- antenna mount for old zmr250 frame. print in pla or tpu, how you like....
thingiverse
free
ZMR 250 everything you need by franksogliola
...zmr 250 everything you need by franksogliola thingiverse zmr250 chinese clone evey thing you need front led strip...
thingiverse
free
ZMR250 SMtuned / Racing Drone / Race Copter / Quadrocopter by SimonFranz5
...adrocopter by simonfranz5
thingiverse
hello,
this is a very light version of zmr 250 (all parts 60-70g)
assembling is very easy.
thingiverse
free
ZMR250 Micro FPV Camera Mount by marcotheboy
...mera positioned 5mm lower (in case you need to tilt the camera upwards a lot)
this should work with any camera that is 19mm wide.
thingiverse
free
ZMR250 Mount for Antenna-GPS-XT60 by Rickolas
... modified the xt60 hole to allow the amass marked xt60 connector that has a more rectangular profile rather than a bevelled edge.
thingiverse
free
ZMR 250 Radio shelf and antenna mount by fluxell
...thingiverse i needed to make some room on my zmr250 so i added a shelf. the post wraps used...
Tilting
3ddd
$1
Deco Breeze DBF0247 Mosaic Pineapple 10 Inch Table Fan
...ensions: 10 inches
oscillating: yes
tilt: yes
three speeds: 900 rpm, 1100 rpm, 1280 rpm
wattage: 20 watts
country of origin china
3ddd
$1
Пластиковые окна
...--
фурнитура fab&fix;
ручка sensei tilt & turn espag handle
петля harbour butt hinge
цвет hardex chrome
есть привязка
3d_ocean
$15
"Penelope" Castelli - 3D Model
... 1982. the shape itself was original, heralded as the first chair to feature a “knee tilt” effect. high detail 3d model + stud...
3ddd
$1
Urban electric Tilt
...urban electric tilt
3ddd
urban electric , tilt
urban electric tilt
archive3d
free
Lamp 3D Model
...candlelight
lamp tilt fagerhult n171012 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Tilt_Radio
...itself replaces any moving buttons, and is used by tilting the device from side to side. tilting the radio...
cg_studio
$249
Real 3d Pinball Machine 23d model
...pper tilt pinballs 3d
.max - real 3d pinball machine 2 3d model, royalty free license available, instant download after purchase.
3d_ocean
$5
Tiling Texture PBR
...re textured tile tiled tilt
tiling texture pbr file format: png 2048×2048 basecolor normal map roughness ambient occlusion height
3ddd
$1
TILT
...tilt
3ddd
kenneth cobonpue
http://www.kennethcobonpue.com/collection/view/44/tilt
3ddd
$1
Smartville
...l function. also available with tilt function, the product is available in fabrics and leathers. globe fabric 5073/brushed steel.
Fpv
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
thingiverse
free
DJI Osmo Action mount for Lisam 210 drone frame by Daniel0915
...johnnyfpv file, so it would fit my lisam 210 fpv drone...
thingiverse
free
FPV Camera Mounts in different sizes - Made originally for SuperG by Alf-Dee-FPV
...hingiverse
i needed different lenghts camera mounts on my superg plus, so i remixed the original progect399 superg camera mount.
thingiverse
free
Sidewinder X1 Bowden holder by CRYSIS-FPV
... you are running the sidewinder x1 - z brace by double_mirages it will help as i run the ptfe tube through the brace.
see photos.
thingiverse
free
Pan and Tilt FPV GoPro Mount by CXframes
...
minimal pan tilt for fpv camera and gopro or similar action cameras.
remixed of --> https://www.thingiverse.com/thing:696864
thingiverse
free
GoPro Hero 8 Naked by djalmaribeiro
...impact. any suggestions leave in the comments. bec 5v https://www.banggood.com/3pcs-matek-systems-micro-bec-6-30v-to-5v-or-9v-adj-step-down-regulator-for-rc-fpvracing-drone-p-1387215.html?p=zd100112146272201707 ...
thingiverse
free
DJI FPV goggle AXII HD antenna protector by ivanricci
...tion part is fragile if you switch to third-party antennas, so i designed this part just to protect it. remember to make a pair.
Camera
3d_export
$30
Tripod 3D Model
...tripod 3d model 3dexport tripod camera photography studio lighting 3d virtualz tripod 3d model virtualz...
3d_ocean
$29
Low Poly Sports Bike
...2013. lighting with vray light and also has vray camera ...
3d_ocean
$29
Scania Truck
...trailer vehicle high poly truck with vray lighting and camera ...
3d_ocean
$29
Parrot Bebop Drone
...parrot bebop drone 3docean aircraft aviation camera chopper dji dron game helicopter parrot-bebop-quadcopter-drone phantom propeller quad...
3d_ocean
$49
Interior Vray Scene with 3 RenderReady Views + PSD
...team7 textures vray interior vray scene with 3 renderready camera realistic v-ray & 3ds max 2014 interior scene, fully...
3d_ocean
$19
Western Gallow Camera Ready
...nd animated wild west wooden gallow. ready gibbet model for both wild west movie and game use. included files : .max (vray), ....
3d_ocean
$15
Highpoly 3d Model of Electrostatic Machine
...rigged:no animated: no uv mapped: no unwrapped uvs: yes camera: 0 lights: 0...
3d_ocean
$5
3d Text and Object Mockup - Wall
...visualisation vray white what’s included: vray rendering setup vray camera, vray lights and shadow studio scene render scene 5852×3901...
3d_ocean
$12
Google Cardboard
...(with .psd files included) + multiple positions + real camera effects (vray 3.0) +...
3d_ocean
$6
3d Text and Object Mockup - Wall
...visualisation vray white what’s included: vray rendering setup vray camera, vray lights and shadow studio scene render scene 5852×3901...
Mount
3ddd
$1
Vega flush mount lamp
...t lamp
3ddd
dimensions: 22.5"wx22.5"dx12"h
размеры: 58см х 58см х 31см
v-ray light included | v-ray light внутри
3ddd
$1
Currey & Company Balthazar
...quality of the glass elements. product name: balthazar ceiling mount dimensions: 21h x 18d x 18w number of lights:...
3d_ocean
$5
Rock_6
...rock_6 3docean mount mountin rock rocks stone rock_6….............1474.polygon. .1476.vertices. 4096 * 4096 texture....
3d_ocean
$19
Low Poly Hotel
...and flower pots, trees, brunches, street lights, trashcans, wall mountd air freshener, air conditioners, fire...
3d_ocean
$25
Low Poly Buildings
...storehouse/warehouse, one grocery/minimarket, flower beds and flower pots, wall mountd air freshener, air conditioners, air intake,...
3d_ocean
$5
rock_4
...rock_4 3docean low polygon mount mountin old rock rock stone rock_4…...............1419.polygon. .1421.vertices. 4096 * 4096...
3d_ocean
$5
mountain_9
...n_9…........................12560 polygon. ...12562 vertices. 4096 * 4096 texture obj , fbx , and blend format model. game ready.
3d_ocean
$25
Low Poly City Block
...and flower pots, trees, brunches, street lights, trashcans, wall mountd ...
3d_ocean
$5
Rock_3
...rock_3 3docean mount mountin rock stone rock_3…..............6048.polygon 6127.point. 4096*4096 texture. obj,fbx,blend format model....
3d_ocean
$5
Rock_2
...rock_2 3docean mount mountin rock stone rock_2…...............3196.polygon 3248.point. 4096*4096 texture. obj,fbx,blend format model....