Thingiverse
Zipper Pull using paperclip by ScubaScott
by Thingiverse
Last crawled date: 4 years, 8 months ago
Zipper pull replacement using a paperclip for a strong connection to the zipper.
There are several posts inside and should fit a variety of paper clips, some bending may be required.
I used 3 M2x6 screws to hold it together.
update 11/2/17
Added a second smaller pull should work with a #1 paperclip
and a third Tiny pull, again should work with the same #1 paperclip
Update 11/25/18
Merry Christmas, I've added a glueable model, that I think works even better.
Just add a couple drops of CA glue and push it together. (once it's all attached to the garment) Enjoy!
Here's a link to the On-Shape drawing if you care to re-mix it.
There are several posts inside and should fit a variety of paper clips, some bending may be required.
I used 3 M2x6 screws to hold it together.
update 11/2/17
Added a second smaller pull should work with a #1 paperclip
and a third Tiny pull, again should work with the same #1 paperclip
Update 11/25/18
Merry Christmas, I've added a glueable model, that I think works even better.
Just add a couple drops of CA glue and push it together. (once it's all attached to the garment) Enjoy!
Here's a link to the On-Shape drawing if you care to re-mix it.