Zahnradbaum - Geartree by Melbac

Last crawled date: 3 years ago

A little mechanical toy i constructed based on a photo i have seen.
All gaps are 0,2 mm wide. If you need bigger (or smaller) gaps write me a short message. I usually replay within a week ;-)
Solidworks files are availble at request.
You will need:
1 x "staender.STL" - its the base.
12 x "axis.stl"
12 x "Gear.stl"
5 x "knot.stl"
24 x screw M3, sinkhead x 20 mm (M3 x 30 will do als well)
The way the knots are designed the base fitts in every hole (add pun here) - should work perfectly with 12 different colours.
Or, if you are brave, print the "baum komplett.stl" - if you have a good printer the parts should be moving after printing.