Y carriage belt holder for MGN12 mod w/ i3 Y carriage by TheThiefMaster

Last crawled date: 3 years, 4 months ago

"Prusa i3 Y-Carraige belt holder V3" by Endlesshunt modified for the reduced height (6.7mm between carriage and belt) for BLV i3 when using a flat carriage instead of the two-part one from the BLV schematics. Should be compatible with the original clamp file (included).
I used my own dimensions for the M3 screw holes - 6mm for the caps (up from 5.5 on the original), 3.2mm for the hole (same as original), 5.8x2.6mm for the nuts (up from 5.4x2.5). I've used these dimensions on a previous design and they worked. The original Fusion 360 file is included and is parametric if you want to tweak the design.
It requires 4x M3x10mm cap head screws and nuts (2mm shorter than the original - but that can't be helped with the reduced vertical size).
Test printing now. I might need to increase the two outer screw holes (for attaching this to the carriage) to M4.