Thingiverse
XZeus Shotgun Parts by Mrheathpants
by Thingiverse
Last crawled date: 4 years, 7 months ago
https://www.youtube.com/playlist?list=PLZ9YYlwfPK3hPlnTYDHNpiB0cvopAabgT
THERE IS A NEW BOLT
It uses a springloaded extractor, and should give the most consistent extraction of the shells and improved ejection.
THE BREECH IS STILL UNTESTED
These are the parts I used for my xzeus shotgun build, using sledgefire shells.
Some of these parts will probably need tweaking, and I'll upload as I test things that work or don't.
The shell stop files needed tweaks, and I also tweaked the lifter with a bit of foam to keep shells from going too far backwards. You may also want to remove some front material from the lifter, about a half inch off the front.
This is not a drop in mod, and requires extensive shellwork and building to work.
THERE IS A NEW BOLT
It uses a springloaded extractor, and should give the most consistent extraction of the shells and improved ejection.
THE BREECH IS STILL UNTESTED
These are the parts I used for my xzeus shotgun build, using sledgefire shells.
Some of these parts will probably need tweaking, and I'll upload as I test things that work or don't.
The shell stop files needed tweaks, and I also tweaked the lifter with a bit of foam to keep shells from going too far backwards. You may also want to remove some front material from the lifter, about a half inch off the front.
This is not a drop in mod, and requires extensive shellwork and building to work.