XR650L Handlebar Switch Mount by luodanli

Last crawled date: 3 years ago

Allows mounting of waterproof switches to center of 1 1/8" bars. I used a DPDT switch for interlock override (offroad and emergency use). The SPST switch is for choosing which ignition curve I want (Ignitech programmable ignition). When printing the version in the photos, I'd forgotten to round the curves at the back of the plate. This has been corrected in my uploaded designs. I may be willing to upload modded designs for different clamping configs, as long as they are generally similar to this design. FYI, I used the 3-hole version for months without problems. I switched to the 2-hole version to allow easier access to the ignition switch.
Minimum 58mm between clamps needed.
Will cover outer clamp edges up to 118mm.
Minimum 8mm between bars and top of clamps needed.
What i used:
Tusk Universal Big Bar Clamp Kit
Pro-Taper Contour 1 1/8" Handlebar Carmichael Bend Black
Blue Sea 4155 DPDT
Blue Sea SPST
Switch Boot