XM30A ESC Covers by tfortmuller

...to cover and protect your dys xm20a escs or similar size escs. stop losing surface mounted caps and resistors...

...measures 30mmx15mmx4.5mm inside the shell. resize to fit others. preferrably print in flexible tpu material with a 50%+ infill.

...or by alphafpv thingiverse this is a cover for the dys xm30a escs. better printed in flexible materials for them to be stronger.

...sc guard 35x17x6 (mm) by ronraysing thingiverse esc guard, pls check dimensions before printing. (use flexible/tough filaments)

...giverse my take on quadcopter esc protection. will recommend printing with flexible, but probably will work with pla / abs/ etc

...39;s. i guess it can covers other brands esc's. esc cover dimensions : 26x35x8 mm printed with pla plus filament, %15 infill.

...esc guards 35x17x6mm 4pcs. print all by ronraysing thingiverse 4pcs. print once. (use flexible/tough filament)

...raceflight esc cover by helimwyatt thingiverse raceflight esc cover

...esc cover by jeanquadvandamme thingiverse esc cover for 10a-40a

...r snug for a cleaner build while still allowing for ventilation. printed with .2 layer height @ 50% infill and 40mm/s print speed

...or by alphafpv thingiverse this is a cover for the dys xm30a escs. better printed in flexible materials for them to be stronger.

...isam 210 / dys xm30a / f40 ii update by fpv57 thingiverse ecs cover for lisam 210 + xm30a (or ohter 15mm width) + t-motor f40 ii

...1fois variante pour la camera :http://www.banggood.com/fr/eachine-700tvl-25mw-1-3-cmos-fpv-110-148-degree-camera-5_8g-w-32ch-transmission-p-991024.html http://www.banggood.com/fr/6inch-15cm-rg316-cable-connector-rp_sma-male-jack-to-female-plug-bulkhead-crimp-p-983166.html x 1fois http://www.banggood.com/fr/new-dys-xm30amini-esc-electronic-speed-controller-for-high-kv-power-p-1045183.html x 4fois http://www.banggood.com/fr/4-x-emax-rs2205-2600kv-racing-edition-cwccw-brushless-motor-for-fpv-multicopters-p-1048844.html x1 fois http://www.banggood.com/fr/upgrade-naze32-f3-flight-controller-acro-6-dof-deluxe-10-dof-for-multirotor-racing-p-1010232.html x 1 fois...

...quadski custom parts by tfortmuller thingiverse this is for rohan.

...superglue instead of a massive glob of hot glue. i printed in tpu seems to hold up well to crashes a little better than hot glue.

...losing surface mounted caps and resistors in crashes. print in a flexible or semi-flexible material, i printed in sainsmart tpu.

...es not include a hole for the sma adapter, the piece attaches to the back two m3 screws and secures the antenna to the top plate.

...(as a mechanical gyro filter depending on your rig). i superglued the fc to the two mounts and superglued the mount to the frame.

...pool holder for 1.75" hub holes to be printed vertically. it secures to the m3 screws at top of the printrbot simple (2016).

...7. this bracket is meant to be used with the carbon strips that come with the frame and plastic screws that come with the camera.

...e with nylon m3 washers and bolts to keep things low profile. print one for each stand off hole on your fc, so a set is 4 pieces.

...once it is in, it's very tightly held in place. the pictured version has a cal logo on it but the downloadable .stl does not.

...ders for littlebee 30a escs by flynoceros thingiverse simple esc cover designed to fit a littlebee 30a escs or simpler sized esc

...esc holders for aikon 30a escs by flynoceros thingiverse simple esc cover designed to fit a aikon 30a escs or simpler sized esc

... not for commercial use apd 100a esc: with bottomside counterbores to accept fr10 apd rear plate pressnuts spedix ls f4 40a esc

...esc holder thingiverse in order to use all available space, i built this esc holder.

...add multiple esc to the bluerov2, esc placement gets a little hard. these esc beds will help you to keep your esc's alligned.

...esc 30 by maikel27 thingiverse protector de esc para esc de 30 amp

...esc shroud by boltrc thingiverse protect escs

...er for it. i glued in the esc's with hot glue. https://hobbyking.com/nl_nl/hobbykingr-tm-brushless-car-esc-30a-w-reverse.html

...esc box by bento_27 thingiverse box for mount esc and button

...esk8 esc case thingiverse esc case for fsesc 4.12

...doorbell cover thingiverse this is a doorbell cover created to replace an damaged cover.

...cover r thingiverse cover

...ipad2018 cover thingiverse cover

...cover by tlatmemad thingiverse cover

...cover by hrii3y thingiverse just cover for cover something, u can change dimmensions at slicer

...toothbrush cover thingiverse toothbrush cover

...webcam cover thingiverse webcam cover

...cover by chris_skywalker thingiverse this is a cover of a box

...cover by kindafluffy thingiverse cover led

...cover by wolfetter thingiverse cover for drill