Thingiverse
X65F Lift Detent by oakdesign
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a WIP
Lift Detent for the Saitek X65F throttle.
Adds Idle and AB Detents to the Throttle which have to lifted in order to pass.
For the Lift Handle there are 2 Versions. 1 to be used with 623 10x4x3 mm Ballbearings and the second to be uses with just M3 Screws
In order to assemle you need
1 M3x30
1 M3x20
3 M3x10 Screws
The Spring for the Lift has been taken from an old pen
https://www.youtube.com/watch?v=prQldBxFs00
Lift Detent for the Saitek X65F throttle.
Adds Idle and AB Detents to the Throttle which have to lifted in order to pass.
For the Lift Handle there are 2 Versions. 1 to be used with 623 10x4x3 mm Ballbearings and the second to be uses with just M3 Screws
In order to assemle you need
1 M3x30
1 M3x20
3 M3x10 Screws
The Spring for the Lift has been taken from an old pen
https://www.youtube.com/watch?v=prQldBxFs00
Similar models
thingiverse
free
Thrustmaster Warthog (TMWH) Anti Lift Detent Cover by Asherao
...l not be able to use the tmwh idle detent
you may not be able to use detents
previous versions are included in the fusion360 file
thingiverse
free
VPC CM3 Throttle Detent arc by ConTrollR
...int the arc on its side.
adjust the arc position so that tha aft shut off detent is at the lowest position of the throttle lever.
thingiverse
free
Thrustmaster TWCS Throttle 50% detent
...thrustmaster twcs throttle 50% detent
thingiverse
50% detent for a thrustmaster twcs throttle
thingiverse
free
Thrustmaster Warthog (TMWH) Collective Xbox One Clip-on by Asherao
...ing the top first then slipping in the bottom (the 3d print is designed to flex to allow the bottom of the controller to slip in.
thingiverse
free
VPC MT-50 Throttle Detent modification by ConTrollR
... detents for afterburner and idle. you need 10 mm m6 ball plungers, m3 screws and these:https://www.thingiverse.com/thing:4625195
thingiverse
free
VPC MT-50 CM2 Throttle Center and High/Low Detents holder by ConTrollR
...tents (afterburner/idle).
requires 10-12 mm m6 ball plungers, m3 screws and these files:https://www.thingiverse.com/thing:4625195
thingiverse
free
AIRBUS inspired DETENT TWCS Throttle by mvnfn
...part: "thdetent01.stl"
really important
this throttle detent is not endorsed or affiliated with airbus or thrustmaster.
thingiverse
free
Virpil CM2 Throttle Detent by atomic_peach
... far.
i am no longer maintaining this file as i have upgraded to a cm3. feel free to use or modify as you see fit. happy flying!
thingiverse
free
VPC MT-50 CM2 Throttle Detents with Idle lock by ConTrollR
...wn.
the modification requires 10mm m6 ball plungers, m3 screws, springs and these files:https://www.thingiverse.com/thing:4625195
thingiverse
free
Thrustmaster Warthog Throttle insert for P38 by HighwaymanEd
...t; and 54" of manifold pressure to line up with the max continuous and combat power settings for the p-38 in il-2 sturmovik.
Oakdesign
thingiverse
free
Mülltonne Scharnier by oakdesign
...mülltonne scharnier by oakdesign
thingiverse
replacement for a brocken hinge of a standard german trashcan, 60l mülltonne
thingiverse
free
Clips Dishwasher by oakdesign
...ered as spare parts. designed and printed my own ones. with petg. dishwasher is running at 60°c water temp. no deformation so far
thingiverse
free
M3 Bed level Mut by oakdesign
... screw for bed leveling.
even so there are already lots of them, this was my first attempt to make my own design using fusion 360
thingiverse
free
AM8 12V 30A PSU Holder by oakdesign
... supply with m4 screws like the xkttsueercrr 12v 30a 360w
screw holes are 50mm for the 2 bottom screws and 150mm to the top screw
thingiverse
free
Anet BL Touch Rear Mount by oakdesign
...to measure the distance between the nozzle and the sensor tip and add it as positive value to
define y_probe_offset_from_extruder
thingiverse
free
AM8 Electronic Case RAMPS Mosfet IRF50 by oakdesign
...0 to fit m3 insted m5 screws
on the back below the wago mounting holes there are prepared m3 holes to take a pi zero or pi zero w
Detent
thingiverse
free
detent by pderosa
...detent by pderosa
thingiverse
testing a model
thingiverse
free
Detent Ball Tool by sterum
...detent ball tool by sterum
thingiverse
simple tool for adjusting my french door detent ball latch
thingiverse
free
Thrustmaster TWCS Throttle 50% detent
...thrustmaster twcs throttle 50% detent
thingiverse
50% detent for a thrustmaster twcs throttle
thingiverse
free
TMC dummy detent by fango1986
...tmc dummy detent by fango1986
thingiverse
.
thingiverse
free
Spyder Detent Holder. by Irontoad
...39;s useful.
sorry the pics stink 500k limit. version 9 has the detent shifted to the front screw to more match the detent slot.
thingiverse
free
x56 Detent (All In One)
...x56 detent (all in one)
thingiverse
added a reverse thrust version.
thingiverse
free
Custom throttle detent for Thrustmaster T.Flight Hotas X by electromotive_force
...etent. i use this joystick for dcs and that allows me to create a deadzone at the position of the new detent using custom curves.
thingiverse
free
VPC CM3 Throttle Detent arc by ConTrollR
...int the arc on its side.
adjust the arc position so that tha aft shut off detent is at the lowest position of the throttle lever.
thingiverse
free
Portable Pinning Tray/Case Version 2 (with detents) by WestCoastPicks
...hey have been left higher than need to account for printer variation. simple file down the 6 detents till it fits to your liking.
Lift
thingiverse
free
LIFT by leonk
...lift by leonk
thingiverse
lift
thingiverse
free
Projector lift
...projector lift
thingiverse
this is a lift for the back of a projector.
thingiverse
free
trackmaster lift
...trackmaster lift
thingiverse
it allows people with an rc or moc cranky to lift there engines
thingiverse
free
Gondola lift
...a lift
thingiverse
you can hang the gondola lift on a string.
the gondola is the ride size that you can fit my cupe mouse in it.
thingiverse
free
Ball Lift by leighryan
...ball lift by leighryan
thingiverse
plastic part for ball lift in water exhibit.
thingiverse
free
Lift Flap
...ft flap for fire call point. i use a 2.4 x 10 mm rivet to connect the lid to the box.
https://www.youtube.com/watch?v=lztvcqan5ec
thingiverse
free
Toy Fork Lift by Paganene
...ith support)
fork lift 2 (with support and raft)
fork lift 3 (with support)
fork lift 4 (with support)
fork lift 5 (with support)
thingiverse
free
Playmobil Tower-Lift-Clip
...playmobil tower-lift-clip
thingiverse
rundturm-lift-clip
produktnr.: 30217532
tower-lift-clip
part-number 30217532
thingiverse
free
JOBO LIFT by lufftpablo
...ece to repair the lever on jobo lift
esta es una pieza para reparar la palanca del lift de la procesadora de negativos jobo cpp-2
thingiverse
free
Awesome Chair Lift by riverthebear
...awesome chair lift by riverthebear
thingiverse
this is an awesome ski lift.