Thingiverse
X2 Elf hardware kit by ErgoFPV
by Thingiverse
Last crawled date: 3 years ago
A hardware set for X2 Elf frame. See the rotorbuilds page for more details and pictures.
The camera pod is tested to fit Runcam Micro Swift and Runcam Micro Sparrow. The Swift is longer than the Sparrow, so there will be even less clearance for the stack because of the connectors at the back. The camera uptilt is 25 degrees. The pod gives enough clearance to run 2 inch props, e.g. Gemfan 2035 four-blades.
Update: alternative Runcam Micro Swift/Sparrow pod with 15 degrees uptilt is uploaded, as well as the one for Caddx F1 cameras, also 15 and 25 degrees uptilt.
The rear spacer is designed to carry a 9mm buzzer and has the notches for a cable tie to hold the power leads and the antenna in place.
Use M2 steel screws and tap the parts with the screws before assembling. Make sure the bottom screws holding the camera pod are not too long, 5-6mm is the maximum, otherwise you might ruin the camera by making contact with the PCB at the back.
The VTX plate is designed for the Eachine VTX02/03. Use a double-sided sticky foam pad to mount the VTX. You can access the button with some pointy object. Make sure you don't short anything inside if the object is conductive.
If you print this, please consider posting a make. I enjoy seeing things I designed out in the wild.
The camera pod is tested to fit Runcam Micro Swift and Runcam Micro Sparrow. The Swift is longer than the Sparrow, so there will be even less clearance for the stack because of the connectors at the back. The camera uptilt is 25 degrees. The pod gives enough clearance to run 2 inch props, e.g. Gemfan 2035 four-blades.
Update: alternative Runcam Micro Swift/Sparrow pod with 15 degrees uptilt is uploaded, as well as the one for Caddx F1 cameras, also 15 and 25 degrees uptilt.
The rear spacer is designed to carry a 9mm buzzer and has the notches for a cable tie to hold the power leads and the antenna in place.
Use M2 steel screws and tap the parts with the screws before assembling. Make sure the bottom screws holding the camera pod are not too long, 5-6mm is the maximum, otherwise you might ruin the camera by making contact with the PCB at the back.
The VTX plate is designed for the Eachine VTX02/03. Use a double-sided sticky foam pad to mount the VTX. You can access the button with some pointy object. Make sure you don't short anything inside if the object is conductive.
If you print this, please consider posting a make. I enjoy seeing things I designed out in the wild.
Similar models
thingiverse
free
RunCam Micro Pod by rings
...t's not tested witch vtx on cameras back, but can be fit.
update 10.12.2017
added 45 degree pod
lighter all pods to around 3g
thingiverse
free
Xhover Win2/Win2XL Pod by johnhooks2
...tenna is also provided on the rear of the pod.
note: intended to be installed in place of the top plate, on top of the standoffs.
thingiverse
free
Runcam Micro 45 degree by meoster
...runcam micro 45 degree by meoster
thingiverse
runcam micro swift pod base at 45 degrees
thingiverse
free
3D Printed Part for KL-EX90 Camera Mount by fpvmodel
...m micro swift
45 degree camera mount for runcam micro swift
the one showed in the pictures and we ship with kl-ex90 is 30 degree.
thingiverse
free
Loki X2 Micro Runcam Mount by vinadre
...loki x2 micro runcam mount by vinadre
thingiverse
mount to hold a micro runcam swift on loki x2 frame.
thingiverse
free
Runcam Micro Sparrow Pod 30.5mm mount angle by rings
...uzzer 9mm
hole for camera wires
hole for zip for fpv antenna's
it's not tested witch vtx on cameras back, but can be fit.
thingiverse
free
RotorX Atom 122 Runcam Swift Pod Canopy MultiDome!!! by THallDesigns
...gys near the back are really just there to help the printer out, you can see i cut them off in the images.
25 degrees camera tilt
thingiverse
free
FPV Flightclub Tokio X Runcam Swift 2 Mount by Alib10
...nt to keep camera inside pod for protection, but not too far back that you can see the edge of the pod with the runcam 2.1mm lens
thingiverse
free
Lantian 90L Runcam Micro Swift Mount by FinalMadness
...ad.
when you need more space, take the 5mm spacer in the back and add the 2.5 mm under the cam mount.
i printed the mount in abs.
thingiverse
free
Super strong Lizard95 mount for Swift micro and vtx by Herman_
...e i combined my two previous designs into one and also made it much stronger by using the m2 screws in the back of the sideplate.
Ergofpv
thingiverse
free
The Maze soap dispenser head for DRAGAN by IKEA by ErgoFPV
... https://youtu.be/mac2hghyara
if you print one, please consider posting a make. i enjoy seeing things i designed out in the wild.
thingiverse
free
Non Slip Screw-on Extruder Button for Anet A8 by ErgoFPV
...tive 40mm extruder fan mount.
if you print one, please consider posting a make. i enjoy seeing things i designed out in the wild.
thingiverse
free
X2 Elf prop guard with camera holder
...took pablo1603's prop guard and mashed it in with ergofpv#39;s 15 degree micro sparrow mount. first version i have...
thingiverse
free
Taranis QX7 LED Gimbal rings by HYDR4Z
...taranis qx7 led gimbal rings by hydr4z thingiverse ergofpv designed the original rings (https://www.thingiverse.com/thing:3240781) but i wanted to...
thingiverse
free
Donut Cinewhoop TPU Prop Guards Protector
...those who are using the excellent donut prop-guard by ergofpv but ignored the instructions and printed them in normal...
thingiverse
free
X2 Elf Camera Mount by duke24
...freecad file (v 0.17), with imported cam holder from ergofpv (stl) converted to...
thingiverse
free
Donut Cinewhoop Prop Guards DJI air unit
...thingiverse some small rework on donut prop guards by ergofpv to fit dji air unit. in addition, standoff holes...
thingiverse
free
Improved Gimbal Protector for DJI Controller by hyperion917
...also to the original design for taranis controllers by ergofpv enjoy! also, if you're looking to protect your gimbals...
Elf
3d_export
$10
Elf
...elf
3dexport
elf archer
3d_export
$15
elf girl
...elf girl
3dexport
elf girl
turbosquid
$1
elf
...f
turbosquid
royalty free 3d model elf for download as blend on turbosquid: 3d models for games, architecture, videos. (1277697)
3d_export
$10
forest elf
...forest elf
3dexport
the charming elf of the green forest
turbosquid
$17
Elf
...
royalty free 3d model elf for download as max, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1346575)
turbosquid
$35
Elf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Elf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$19
character elf girl
...character elf girl
3docean
character elf girl human woman
a model of the girl elf with armour.
3d_export
$17
Elf 3D Model
...elf 3d model
3dexport
elf guitar fantasy
elf 3d model skulptor 15863 3dexport
3d_export
$99
Night Elf
...night elf
3dexport
night elf model that is game ready and can be imported to game engines for furthur use.
X2
3ddd
$1
MATERIA centrum table x2+plint x2
...materia centrum table x2+plint x2
3ddd
materia
materia centrum table x2+plint x2
turbosquid
$5
fighter x2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$59
Leica X2 3D Model
...xport
leica x2 digital camera photorealistic detailed textures materials vray mental
leica x2 3d model fisherman3d 55634 3dexport
turbosquid
$40
Speaker concert x2
...
royalty free 3d model speaker concert x2 for download as max on turbosquid: 3d models for games, architecture, videos. (1219795)
turbosquid
$22
Ceiling fans x2
...id
royalty free 3d model ceiling fans x2 for download as max on turbosquid: 3d models for games, architecture, videos. (1442931)
3ddd
$1
Singo X2 Lightstar 011612
...singo x2 lightstar 011612
3ddd
lightstar
потолочный точечный светильник singo x2 lightstar 011612
turbosquid
$1
small building x2
... 3d model small building x2 for download as 3ds, fbx, and skp on turbosquid: 3d models for games, architecture, videos. (1191792)
3d_export
$6
Scope x2
...of work that can adapt to many projects. you can use it directly. you don't need any plugin polygons : 71545 vertices : 51339
turbosquid
$6
Door X2 ProfilDoors
...el door x2 profildoors for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1246575)
3d_export
$49
Segway X2 3D Model
...ecologic electric eco city transport future scooter green scifi mobile segway i2 x2 urban
segway x2 3d model squir 79796 3dexport
Kit
turbosquid
$3
Bathroom Kit Baño kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
Drift Kit
...drift kit
3dexport
turbosquid
$40
BitCoin Kit
...urbosquid
royalty free 3d model bitcoin kit for download as on turbosquid: 3d models for games, architecture, videos. (1519068)
turbosquid
$9
Industrial kit
...osquid
royalty free 3d model industrial kit for download as on turbosquid: 3d models for games, architecture, videos. (1144117)
turbosquid
$6
Kit Vases
...
turbosquid
royalty free 3d model kit vases for download as on turbosquid: 3d models for games, architecture, videos. (1285114)
turbosquid
free
Survival Kit
...rbosquid
royalty free 3d model survival kit for download as on turbosquid: 3d models for games, architecture, videos. (1637721)
turbosquid
$50
Ninja Kit
...rbosquid
royalty free 3d model ninja kit for download as fbx on turbosquid: 3d models for games, architecture, videos. (1672364)
turbosquid
$35
Brushes Kit
...osquid
royalty free 3d model brushes kit for download as max on turbosquid: 3d models for games, architecture, videos. (1216721)
turbosquid
$19
Medical kit
...osquid
royalty free 3d model medical kit for download as fbx on turbosquid: 3d models for games, architecture, videos. (1486089)
Hardware
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware
restoration hardware
3ddd
$1
RESTORATION HARDWARE
...restoration hardware
3ddd
restoration hardware , телескоп
restoration hardware
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware
restoration hardware, кресло,
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware , декоративный набор
restoration hardware
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware , декоративный набор
restoration hardware
3ddd
$1
Restoration Hardware
... hardware , боров , свинья
restoration hardware
3ddd
$1
Restoration Hardware
...ardware , корона , медведь
restoration hardware
3ddd
$1
Restoration Hardware
...ation hardware
3ddd
restoration hardware , тумба
тумба прикроватная restoration hardware
3ddd
free
Restoration Hardware
... кашпо , куст , свеча
restoration hardware
3ddd
free
Restoration Hardware
...restoration hardware
3ddd
restoration hardware
restoration hardware menlo table lamp