X-UAV Mini Talon Parts v3 by markqv

Last crawled date: 3 years ago

ABS and PLA are not stronger than properly glued plywood unless they are substantially thicker and heavier. So, since there is no need to design and print the wood center structure I have created this simple Gear Deck that fits the stock structure of the Mini Talon perfectly. There are four deck clips which are threaded for a 3mm x 10mm stand-off and a deck piece which has a pile of slots and holes for passing wires and/or wire ties. A complete set-up includes:
1x Gear_Deck_v1.stl
2x Gear_Deck_Clip_v2.stl
2x Gear_Deck_Clip_Mirror_v2.stl
4x M3 x 6mm Screws
4x 3mm Flat washers
4x M3 x 10mm nylon Stand-offs
After all pieces are printed, cleaned up and the four clips tapped, assemble th deck in the plane without the stand-offs and keep the screws loose. Add a little glue to each clip where it contacts the wood then gently tighten all four screws making sure all pieces stay straight and square. Let the glue set-up then it is ready to load up with your gear and add the stan-offs!
Note: If you desire a cushioned deck simply replace the nylon stand-offs with rubber anti-vibration stand-offs.
To see my build pages on this project, please visit:http://www.itsqv.com/QVM/index.php?title=Mini_Talon_X-UAV_Build_Number_2
More Mini Talon Parts!http://www.itsqv.com/QVM/index.php?title=Mini_Talon_Parts_Compilation