Thingiverse
x axis cable chain for GEEETech I3 ProB(easy to assemble) by ybjack
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is easy assemble x-axis cable chain.
Almost print in place, fold & snap to use.
no support, no glue.
need to change end bolt of extruder stepper.
Some possibility, you need to change cable of extruder to long one.
1)x_axis_cable_chain_ProB_once.stl
Print at once all parts.
2)strait_unit_155.stl
155mm long strait part.
3)chain_adaptor_extruder_ProB.stl
Chain end for stepper of extruder. You need change bolt of stepper to 38mm long.
4)chain_adaptor_x_stepper_ProB.stl
Another chain end for x-axis stepper. fold 90 deg & click.
5)cable_chain_PiP_8x2.stl
Print in place cable chain, 8 link x2 lines.
In the photograph, I used 18 links, but as I thought through the cable, 16 links were enough.
Almost print in place, fold & snap to use.
no support, no glue.
need to change end bolt of extruder stepper.
Some possibility, you need to change cable of extruder to long one.
1)x_axis_cable_chain_ProB_once.stl
Print at once all parts.
2)strait_unit_155.stl
155mm long strait part.
3)chain_adaptor_extruder_ProB.stl
Chain end for stepper of extruder. You need change bolt of stepper to 38mm long.
4)chain_adaptor_x_stepper_ProB.stl
Another chain end for x-axis stepper. fold 90 deg & click.
5)cable_chain_PiP_8x2.stl
Print in place cable chain, 8 link x2 lines.
In the photograph, I used 18 links, but as I thought through the cable, 16 links were enough.