Thingiverse
X-107 - 2" Micro Brushless Drone Beta Testing by Karamvir_Bhagat
by Thingiverse
Last crawled date: 3 years, 1 month ago
X-107 - Micro Brushless 2" 11xx Compatible Drone Frame - Beta Testing
13.09.2018 - IMPORTANT UPGRADE TO CAMERA MOUNTS
Note:
This mount is internally cleared for 20 x 20 mm to ensure a clean fit for the camera. The mount can easily be bend to accommodate for any looseness and or you can use thin washer to resolve any issues if you encounter any.
Picking the right file:
There are several files here, they are as follows:
RunCam 19 x 19 Mount - Has a M2 hole on each side to mount 19 x 19 cameras or the provided adapters.
RunCam 19 x 19 Mount - Has M2 slots on each side to mount 19 x 19 cameras or the provided adapters.
Drop Head RunCam 19 x 19 Mount - Is labelled as such and is smaller than the other mounts. It is such that you should be able to now mount off the roof.
Universal Camera Adapter - By looping a rubber band around the front of the lens, twisting, pulling behind and over your camera and back onto the lens will secure your FPV camera. This is suitable for Tiny Whoop style cameras and offers adjustable tilt. The lens is cleared for 13.8 mm lenses.
Universal Camera Adapter TPU - This is the same as the above file with a smaller lens opening. If printed in TPU you can push fit in your camera. The mount should stretch and grip it. If you have difficultly carefully and safely cut a small slit to expand the hole.
Print Advice:
Place the piece on the bed so that when looking directly down it appears as a C or a U. You should have the print lines running along the long edge of the piece where the camera bolts in.
For the adapter print vertically with the lock points point up off the bed.
Files have been updated and included. Separate files can be found at: https://www.thingiverse.com/thing:3098162
real_darKing kindly made and shared an attractive mount to use on my frames. You can check it out at: https://www.thingiverse.com/thing:3094068
Update: 11.09.2018
New RunCam 19 x 19 - Some users kindly reported that they were having issues with fitment of their RunCam cameras. This new mount has added clearance and should now clearance adequately. It mounts to the frame in the slot with M3 hardware.
For the most strength, print so that the mount:
Appears like a C or U flat on the bed.
Has the layer lines running up the vertical edges with camera mount holes.
real_darKing kindly made and shared an attractive mount to use on my frames. You can check it out at: https://www.thingiverse.com/thing:3094068
You can join the Facebook group at:https://www.facebook.com/groups/254825821981391/
Facebook Group & Entry Page: https://www.facebook.com/groups/254825821981391/
Hi there and thanks for volunteering to help me with my X-107 project! I was unable to afford the parts I needed to get it into the air this month and so really do appreciate your help.
I had quite a response on Facebook and so decided to turn the opportunity into a little fun competition to help encourage people to get interested. I will likely make a page in the next few days where you can post your builds and videos for consideration. I will then most likely put the entrants into a poll where a group pf Facebook will vote for best pic and video!
I really appreciate your time and effort in assisting me. Everything else aside I wanted to release the frame to beta test to see if there were any major issues with fitment etc. If there are please do let me know so I can make the necessary modifications. I also appreciate any feedback or ideas you might have.
The camera mounts are included for tiny whoop style cameras and also I have included mounts for run cam 19 x 19 camera. There are blanks for the former if you have a particularly weird lens size. Alternatively the frame accepts accessories in M3 hardware sizes so you can use any mount and just drill a hole in. The standoffs are 30.5 mm x 30.5 mm and you could also use a TPU mount off the standoffs like mini quads do.
Things to note and observe:
See where the quad breaks and snaps and see what kind of crash causes this. Helps me to add strength to sections etc.
See if you quad with the same set up runs more quietly and with less vibration. You may also note less need to PID tune and less electrical interference.
The frame is a true X so if you haven't flown one before this will likely feel a little strange at first. Once you get used to it, nothing else flies as evenly. Please take note of stability and balance in rolls and flips etc.
Build advice:
Reference the X-132 page for better instructions and ideas.
You can build in a number of formats so have fun and perhaps try a split frame or a pusher frame.
If you go fully modular you will need long M2 and M3 bolts to secure your stack/components.
I would reccomend printing in the 1.1 mm plates and stacking 3 in whatever combination of materials you want to try out, even in the same material this works well. I also had good success with PLA/TPUPLA and noted this might be improved b using PETG.
For camera mounts print so the lines vertically run up the part.
Stack plates have been included from the X-132 so you can have a nice neat build with protected and secured parts.
Bottom mounting the battery will save you a lot of broken arms.
Frame specifics:
True X-107 mm frame.
9 mm motor mount in x and +.
Can be printed in uni-body or modular.
Can be built as standard config, pusher, puller and split front/rear.
Active Vibration Dampening Geometry - fully proportional design including accessories should help to increase strength and reduce vibration.
Important Legal Information:
Legal Declaration – Originality of design:
I hereby state that I am the sole author of this work, that it is an original creation and not a duplication in any form.
Legal Disclaimer:
I accept no liability for damage, harm, injury or death caused to anything by the use of this design.
You use this design at your own risk and are responsible for any consequences as such.
Designers Note:
Thank you very much your interest and for your participation should you wish to engage in the project!
Karamvir Bhagat
13.09.2018 - IMPORTANT UPGRADE TO CAMERA MOUNTS
Note:
This mount is internally cleared for 20 x 20 mm to ensure a clean fit for the camera. The mount can easily be bend to accommodate for any looseness and or you can use thin washer to resolve any issues if you encounter any.
Picking the right file:
There are several files here, they are as follows:
RunCam 19 x 19 Mount - Has a M2 hole on each side to mount 19 x 19 cameras or the provided adapters.
RunCam 19 x 19 Mount - Has M2 slots on each side to mount 19 x 19 cameras or the provided adapters.
Drop Head RunCam 19 x 19 Mount - Is labelled as such and is smaller than the other mounts. It is such that you should be able to now mount off the roof.
Universal Camera Adapter - By looping a rubber band around the front of the lens, twisting, pulling behind and over your camera and back onto the lens will secure your FPV camera. This is suitable for Tiny Whoop style cameras and offers adjustable tilt. The lens is cleared for 13.8 mm lenses.
Universal Camera Adapter TPU - This is the same as the above file with a smaller lens opening. If printed in TPU you can push fit in your camera. The mount should stretch and grip it. If you have difficultly carefully and safely cut a small slit to expand the hole.
Print Advice:
Place the piece on the bed so that when looking directly down it appears as a C or a U. You should have the print lines running along the long edge of the piece where the camera bolts in.
For the adapter print vertically with the lock points point up off the bed.
Files have been updated and included. Separate files can be found at: https://www.thingiverse.com/thing:3098162
real_darKing kindly made and shared an attractive mount to use on my frames. You can check it out at: https://www.thingiverse.com/thing:3094068
Update: 11.09.2018
New RunCam 19 x 19 - Some users kindly reported that they were having issues with fitment of their RunCam cameras. This new mount has added clearance and should now clearance adequately. It mounts to the frame in the slot with M3 hardware.
For the most strength, print so that the mount:
Appears like a C or U flat on the bed.
Has the layer lines running up the vertical edges with camera mount holes.
real_darKing kindly made and shared an attractive mount to use on my frames. You can check it out at: https://www.thingiverse.com/thing:3094068
You can join the Facebook group at:https://www.facebook.com/groups/254825821981391/
Facebook Group & Entry Page: https://www.facebook.com/groups/254825821981391/
Hi there and thanks for volunteering to help me with my X-107 project! I was unable to afford the parts I needed to get it into the air this month and so really do appreciate your help.
I had quite a response on Facebook and so decided to turn the opportunity into a little fun competition to help encourage people to get interested. I will likely make a page in the next few days where you can post your builds and videos for consideration. I will then most likely put the entrants into a poll where a group pf Facebook will vote for best pic and video!
I really appreciate your time and effort in assisting me. Everything else aside I wanted to release the frame to beta test to see if there were any major issues with fitment etc. If there are please do let me know so I can make the necessary modifications. I also appreciate any feedback or ideas you might have.
The camera mounts are included for tiny whoop style cameras and also I have included mounts for run cam 19 x 19 camera. There are blanks for the former if you have a particularly weird lens size. Alternatively the frame accepts accessories in M3 hardware sizes so you can use any mount and just drill a hole in. The standoffs are 30.5 mm x 30.5 mm and you could also use a TPU mount off the standoffs like mini quads do.
Things to note and observe:
See where the quad breaks and snaps and see what kind of crash causes this. Helps me to add strength to sections etc.
See if you quad with the same set up runs more quietly and with less vibration. You may also note less need to PID tune and less electrical interference.
The frame is a true X so if you haven't flown one before this will likely feel a little strange at first. Once you get used to it, nothing else flies as evenly. Please take note of stability and balance in rolls and flips etc.
Build advice:
Reference the X-132 page for better instructions and ideas.
You can build in a number of formats so have fun and perhaps try a split frame or a pusher frame.
If you go fully modular you will need long M2 and M3 bolts to secure your stack/components.
I would reccomend printing in the 1.1 mm plates and stacking 3 in whatever combination of materials you want to try out, even in the same material this works well. I also had good success with PLA/TPUPLA and noted this might be improved b using PETG.
For camera mounts print so the lines vertically run up the part.
Stack plates have been included from the X-132 so you can have a nice neat build with protected and secured parts.
Bottom mounting the battery will save you a lot of broken arms.
Frame specifics:
True X-107 mm frame.
9 mm motor mount in x and +.
Can be printed in uni-body or modular.
Can be built as standard config, pusher, puller and split front/rear.
Active Vibration Dampening Geometry - fully proportional design including accessories should help to increase strength and reduce vibration.
Important Legal Information:
Legal Declaration – Originality of design:
I hereby state that I am the sole author of this work, that it is an original creation and not a duplication in any form.
Legal Disclaimer:
I accept no liability for damage, harm, injury or death caused to anything by the use of this design.
You use this design at your own risk and are responsible for any consequences as such.
Designers Note:
Thank you very much your interest and for your participation should you wish to engage in the project!
Karamvir Bhagat
Similar models
thingiverse
free
"Monster Whoop" 19 x 19 & RunCam Camera Mount by Karamvir_Bhagat
...e long edge of the piece where the camera bolts in.
for the adapter print vertically with the lock points point up off the bed.
thingiverse
free
X-153 - "Sauce 1" - XL Monster Whoop - 3" Micro Brushless Quadcopter Drone by Karamvir_Bhagat
...or by rotating the stack to have one corner facing forward like a tiny whoop.
adapters: https://www.thingiverse.com/thing:3093369
thingiverse
free
X-82 "Monster Whoop" - 1.9 - 2.5 Inch Micro Brushless FPV Racing Drone Quadcopter by Karamvir_Bhagat
...y and all liability is with you the user.
you use this design at your own risk and are responsible for any consequences as such.
thingiverse
free
X-120 - 2 Inch "Monster Whoop" Micro Brushless Racing Drone Quadcopter by Karamvir_Bhagat
...just quickly and easily sketch something up for yourself. similary, if you want to have holes instead of slots...
thingiverse
free
Runcam Split/Swift Mini to Swift Camera Adaptor Mounting Bracket - GoPro Lens by kmmarlow
...t of my armattan japalura.
you will need:
2 x m3 nuts
4 x m2 nuts
plus m3 and m2 bolts (length depends on your frame thickness)
thingiverse
free
XC-120 Patriot - Micro Brushless 2.5 inch "Monster Whoop" 3D Printable Quadcopter Drone by Karamvir_Bhagat
...just quickly and easily sketch something up for yourself. similary, if you want to have holes instead of slots...
thingiverse
free
Runcam Owl HS1177 adapter by earlynerd
...nd should hold into the mount with a little bit of double sided adhesive. step file provided in case you'd like to modify it.
thingiverse
free
Runcam Mini Lens cover and Micro mount by jacobbloy
...elf as 3d printing such small pitch threads will not work. because of this i would print with 80-100% infill and 4-6 layer walls.
thingiverse
free
Runcam Split/Swift Mini to Swift Camera Adaptor Mounting Bracket - Standard Lens by kmmarlow
...ont of my armattan japalura.
you will need:
2 x m3 nuts
4 x m2 nuts
plus m3 and m2 bolts (length depends on your frame thickness)
thingiverse
free
CS mount adapter for Raspberry Pi Camera board by charmlee
...to accept any cs-mount lens, you will need another c-mount to cs-mount adapter ring for c-mount lens. now supporting v2.1 camera.
Karamvir
thingiverse
free
Runcam Micro Sparrow Holder for X-153 and other similar Frames by real_darKing
...the x-153 abd x-132, a 3d printable frame by karamvir bhagat https://www.thingiverse.com/thing:3079727https://www.thingiverse.com/thing:2956351 thank you! about the thing: i wanted...
thingiverse
free
X-120 - 2 Inch "Monster Whoop" Micro Brushless Racing Drone Quadcopter by Karamvir_Bhagat
... you the user.
you use this design at your own risk and are responsible for any consequences as such.
with love - karamvir bhagat
thingiverse
free
XC-120 Patriot - Micro Brushless 2.5 inch "Monster Whoop" 3D Printable Quadcopter Drone by Karamvir_Bhagat
... you the user.
you use this design at your own risk and are responsible for any consequences as such.
with love - karamvir bhagat
Bhagat
3d_sky
$8
Roman shades of velvet
...fill your room and provide its originality and splendor bhagat ...
thingiverse
free
Runcam Micro Sparrow Holder for X-153 and other similar Frames by real_darKing
...x-153 abd x-132, a 3d printable frame by karamvir bhagat https://www.thingiverse.com/thing:3079727https://www.thingiverse.com/thing:2956351 thank you! about the thing: i wanted to...
thingiverse
free
X-120 - 2 Inch "Monster Whoop" Micro Brushless Racing Drone Quadcopter by Karamvir_Bhagat
... you the user.
you use this design at your own risk and are responsible for any consequences as such.
with love - karamvir bhagat
thingiverse
free
XC-120 Patriot - Micro Brushless 2.5 inch "Monster Whoop" 3D Printable Quadcopter Drone by Karamvir_Bhagat
... you the user.
you use this design at your own risk and are responsible for any consequences as such.
with love - karamvir bhagat
cg_trader
$20
Bhagat Singh | 3D
...3d print, bhagat singh figurine. bhagat singh bust. bhagat singh stl bhagat singh bhagatsingh revolutionary indian art sculptures
grabcad
free
Logo SD Bhagat
...logo sd bhagat
grabcad
that is my logo, for my vehicle.
grabcad
free
SCREW JACK By Dipraj Bhagat
...
to remove tyre it needs to lift vehicle upwards this jack helps to lift the vehicle upwards and makes tyre removal process easy
3dwarehouse
free
bhautik bhagat fc
...bhautik bhagat fc
3dwarehouse
3dwarehouse
free
bhautik bhagat 2
...bhautik bhagat 2
3dwarehouse
107
3ddd
$1
МООН 107
...моон 107
3ddd
moon
модель 107
3ddd
$1
INVE_conjunto 107
...inve_conjunto 107
3ddd
inve , conjunto
inve_conjunto 107 (1050х480х2000)
turbosquid
$15
Curtain 107
...royalty free 3d model curtain 107 for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1343699)
turbosquid
$15
Chair 107
...lty free 3d model chair 107 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1497604)
turbosquid
$12
Table 107
...lty free 3d model table 107 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1503777)
turbosquid
$10
Lamp 107
...alty free 3d model lamp 107 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1500733)
turbosquid
$10
Bedcloth 107
... free 3d model bedcloth 107 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1531184)
turbosquid
$15
Curtain 107
...e 3d model curtain 107 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1618018)
turbosquid
$29
Landscape 107
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Earrings 107
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Brushless
turbosquid
$4
Brushless motor
...r download as 3ds, dxf, obj, xsi, wrl, fbx, dwg, dae, and skp on turbosquid: 3d models for games, architecture, videos. (1366202)
3d_export
$10
wheel and motor for mars rover
...last project: a mars rover concept. complete wheel and brushless electrical motor designed to attach to an atv or...
3d_export
$100
the volt futuristic ev hypercar
...future ! some design aspects : this is in-wheel (brushless hub) motors vehicle, for each motor the core part...
3d_export
$20
si cantik cargo plane for humanity medicine kit
...used for the tailboom. the electronic components used are brushless motor os 1000kv which can produce thrust 3kgas a...
free3d
free
N6375 Brushless Motor
...n6375 brushless motor
free3d
n6375 brushless motor
thingiverse
free
Tyro 79 brushless key
...tyro 79 brushless key
thingiverse
tyro 79 brushless key
thingiverse
free
Propeller antirotation brushless lock
...propeller antirotation brushless lock
thingiverse
propeller antirotation brushless lock
thingiverse
free
Brushless motor holder by NukeCraft
...brushless motor holder by nukecraft
thingiverse
brushless motor holder for bl3650
thingiverse
free
Brushless motor mount by robotbuilders
...brushless motor mount by robotbuilders
thingiverse
replacement mount for brushless motor.
thingiverse
free
Brushless motor mount by TarsVH
...brushless motor mount by tarsvh
thingiverse
a mount for a 2830 size brushless motor
Beta
3d_export
$5
beta
...ength 220 mm height 150 mm width 150 mm polys: 11 921 verts: 12 437 https://www.fedomo.ru/product/785616-bra-beta-785616_201975/
turbosquid
$20
highpoly beta
...quid
royalty free 3d model highpoly beta for download as max on turbosquid: 3d models for games, architecture, videos. (1473083)
design_connected
$18
20LTD Konstantin Beta
...20ltd konstantin beta
designconnected
20ltd konstantin beta computer generated 3d model.
3ddd
$1
beta outdoor chair
...beta outdoor chair
3ddd
beta , уличная мебель
model come with texture and fbx file
turbosquid
$100
Beta- Secretase
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
wheel beta
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
home beta
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Katarn Beta 3D Model
...star wars
katarn beta star wars n200713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$10
Alfa beta gamma
...ee 3d model alfa beta gamma for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1371319)
turbosquid
$30
Beta Centauro Rocket
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Drone
3d_export
$12
Drones
...drones
3dexport
drones
3d_export
$5
drone
...drone
3dexport
drone
3d_export
$6
drone
...drone
3dexport
high poly model of dji phantom 4 (drone)
3d_export
$5
drone
...drone
3dexport
drone military flight, sizes are in mm, modeled in fision 360
3d_export
free
drone
...drone
3dexport
drone de uso tactico, creado en blender version 2.79
3d_export
$35
DRONE
...drone
3dexport
turkey drone alpagu kamikaze foldable wing 3ds max 2019,2020,2021,2022 vray 5.00 rendered
3d_ocean
$29
Drone
...drone camera drone electronics justtomas military parrot plane robot sci-fi spy toy vehicle
drone by justtomas .c4d r16 .obj .3ds
turbosquid
$6
Drone
...rone
turbosquid
royalty free 3d model drone for download as on turbosquid: 3d models for games, architecture, videos. (1347051)
turbosquid
free
Drone
...drone
turbosquid
free 3d model drone for download as blend on turbosquid: 3d models for games, architecture, videos. (1688993)
turbosquid
$69
Drone
...e
turbosquid
royalty free 3d model drone for download as max on turbosquid: 3d models for games, architecture, videos. (1232508)
Micro
3ddd
$1
Micro
...micro
3ddd
автобус
turbosquid
$80
MICRO
...ty free 3d model micro for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1700743)
3ddd
$1
JBL Micro Wireless
... micro , колонка , плеер
jbl micro wireless
turbosquid
$10
Suppressor Micro
...quid
royalty free 3d model suppressor micro for download as on turbosquid: 3d models for games, architecture, videos. (1380433)
turbosquid
$20
Micro Meter
...osquid
royalty free 3d model micro meter for download as fbx on turbosquid: 3d models for games, architecture, videos. (1350448)
turbosquid
$7
NIghtstand Micro
...d
royalty free 3d model nightstand micro for download as max on turbosquid: 3d models for games, architecture, videos. (1248117)
3ddd
$1
Micro wind turbine
...micro wind turbine
3ddd
турбина
micro wind turbine for your green building projects
turbosquid
$29
Micro Speakers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Micro Servo.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Micro cells
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Testing
turbosquid
$99
test
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1251637)
turbosquid
$63
TEST
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1446233)
turbosquid
$1
test
...st
turbosquid
royalty free 3d model test for download as fbx on turbosquid: 3d models for games, architecture, videos. (1360941)
3d_export
free
johnny test
...johnny test
3dexport
johnny test 3d
turbosquid
$15
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
gripper test
...gripper test
3dexport
robot gripper test model
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур