Thingiverse
WPL C24 Cantilever Suspension using Losi shocks by AardvarkSpleen
by Thingiverse
Last crawled date: 4 years, 9 months ago
This is a big time work in progress, probably wouldn't have posted yet, but someone asked me to. I want to make the parts a bit beefier, and maybe add bearings to the pivots.
I used a bunch of different m2, and m3 bolts and nuts (B07VPDPQQS). Also the Sharegoo metal suspension components (B084G8J497). I had a spare kit and used the short rods from that kit for my push rods. The shocks used are the Losi ones (LOS314005).
The magnetic body mount uses magnets that I got from banggood forever ago. They measure around 10mmx3mm. After I printed it, I had the idea to drill a hole through the bracket, and run the wires for the headlights to the backside of the magnets so they complete the circuit through the magnets.
Good luck.
I used a bunch of different m2, and m3 bolts and nuts (B07VPDPQQS). Also the Sharegoo metal suspension components (B084G8J497). I had a spare kit and used the short rods from that kit for my push rods. The shocks used are the Losi ones (LOS314005).
The magnetic body mount uses magnets that I got from banggood forever ago. They measure around 10mmx3mm. After I printed it, I had the idea to drill a hole through the bracket, and run the wires for the headlights to the backside of the magnets so they complete the circuit through the magnets.
Good luck.