Thingiverse
World Maker Faire Makey Robot Shoulder Mod
by Thingiverse
Last crawled date: 6 years, 1 month ago
SEE NOTE PLEASE :)
The original shoulder World Maker Faire Makey Robot was not accurate. The bolt they listed don't even enter the hole in the center of the robot. I did a slight modification that now need a M3X18mm to hold the Spacer, and the shoulder is hold around the spacer by a notch.
Print ALL other files of the original robot.
NOTE that i need to sand a little bit the spacer. Mabye because my printer is not yet 100% dialed/calibrated. I should be okay If i scale down at 99%. The notch is too tight.
Yep, i wrote it 3 times to be sure you see it :)
The original shoulder World Maker Faire Makey Robot was not accurate. The bolt they listed don't even enter the hole in the center of the robot. I did a slight modification that now need a M3X18mm to hold the Spacer, and the shoulder is hold around the spacer by a notch.
Print ALL other files of the original robot.
NOTE that i need to sand a little bit the spacer. Mabye because my printer is not yet 100% dialed/calibrated. I should be okay If i scale down at 99%. The notch is too tight.
Yep, i wrote it 3 times to be sure you see it :)