Thingiverse
Working Tesla Turbine by Evander12345
by Thingiverse
Last crawled date: 3 years ago
A Tesla Turbine that uses 608 bearings and has a a modular shaft to attach any tool to. The 608 Skate bearing goes into the rotor housing, and then the rod goes into the hole in the skate bearing. This rod serves as the exhaust for the turbine and allows the air to go through the system. Do not plug the hole on the rod as it is important to the turbine. The rod has one end with a special connector I made for it so it can hook up to things such as a gear box. The intake for the turbine is located on the rotor housing, which is a 1cm diameter hole. All of these parts press fit together. I haven't measured the RPM this thing can reach, but it makes a pretty scary noise going full tilt.
Gears can be found here: https://www.thingiverse.com/thing:2502253
WARNING: Be careful with this when you are spinning it as it could break and send shards of plastic flying. Be sure to engage safety squints and also wear proper eye protection.
Gears can be found here: https://www.thingiverse.com/thing:2502253
WARNING: Be careful with this when you are spinning it as it could break and send shards of plastic flying. Be sure to engage safety squints and also wear proper eye protection.
Similar models
thingiverse
free
Snap Together Vertical Skate Bearing (608) Mount by Luked
...thing that can be improved upon.
i have also uploaded a horizontal version (thing: 34590, http://www.thingiverse.com/thing:34590)
thingiverse
free
Snap Together Horizontal Skate Bearing (608) Mount by Luked
...e's anything that can be improved upon.
i have also uploaded a horizontal version (thing: 34676, thingiverse.com/thing:34676)
thingiverse
free
Tesla Turbine (Mostly Printed)
...or a fully 3d printed turbine. however im sure it could be improved on.
.
.
.
requires 2 608 ball bearings and 16 medium zip ties
3dwarehouse
free
608 skate bearing
...608 skate bearing
3dwarehouse
608 skate bearing, skateboard bearing #608_skate_skateboard_bearing
thingiverse
free
Pointed Fidget Spinner by brownkhiler
...nkhiler
thingiverse
my fist upload to thing verse so i'm very excited!!!!
put a standard 608/skate bearing in all the holes
thingiverse
free
608 bearing to m4 threaded rod adapter by Antsurkov
...i use it with this z rod constraint for prevent z wobbing. http://www.thingiverse.com/thing:9864/
inner hole 4mm, outer size 8 mm
thingiverse
free
608 Skate bearing, a tribute by mortomr
...y mortomr
thingiverse
stunt double for the ubiquitous 608 skate bearing, i used it for mockups, clearances and a boolean in 123d
thingiverse
free
Z-Roll for 608 bearings by Printer
...the bearing and the rod. if you drill out one of the holes, you can adjust the bearing to the rod.
works very fine. just love it.
thingiverse
free
CTC bottom plate Z axis with bearing by AxlNam
...in every skate store
normally you need also on the top a bearing but if your rod is not exactly. may it has influence on heat bed
thingiverse
free
CTC bottom Z axis platte with bearing by AxlNam
...in every skate store
normally you need also on the top a bearing but if your rod is not exactly. may it has influence on heat bed
Evander12345
thingiverse
free
Cube Stand by Evander12345
...ow to illuminate the cube. the bottom can be resized to accommodate more electronics inside it and still attach to the top piece.
thingiverse
free
Gearset for turbine by Evander12345
...ttle gear. the small gear with the things poking up out of it stacks on top of the big gear so you can create a gearbox of sorts.
thingiverse
free
Servo Hexapod joint by Evander12345
...acto blade to cut off a support structure. orientate the circle sideways with the support facing down towards the build platform.
thingiverse
free
Steadtler 925 25-03 cap by Evander12345
... for other 925 25-xx series pencils with a little modification. fit mine perfectly, but your printer might be a little different.
Tesla
3d_export
$15
tesla cybertruck
...tesla cybertruck
3dexport
this is an tesla cybertruck.
3d_export
$5
Tesla emblem
...tesla emblem
3dexport
this is tesla emblem
3d_export
$5
nikola tesla
...nikola tesla
3dexport
nikola tesla
turbosquid
$15
Tesla - Rims - Tesla Model 3
...e 3d model tesla - rims - tesla model 3 for download as blend on turbosquid: 3d models for games, architecture, videos. (1612048)
3d_export
$5
Tesla coil
...tesla coil
3dexport
detailed tesla coil model
3d_export
$5
tesla cybertruck
...tesla cybertruck
3dexport
3d model of low poly tesla cybertruck
3d_export
$20
tesla cybertruck and tuning tesla cybertruck
...tesla cybertruck and tuning tesla cybertruck
3dexport
the model consists of 230 details
3d_export
$5
tesla cup
...;br>this file contains a model of a cup with the tesla logo.<br>made in the visualization and modeling program cinema 4d
3d_export
$15
tesla tower object
...tesla tower object
3dexport
tesla tower object
3d_export
$60
tesla cybertruck
...tesla cybertruck
3dexport
3d model tesla cybertruck hi-poly , corona render ,3ds max , obj , fbx
Turbine
3d_export
$5
turbine
...turbine
3dexport
it is a turbine to use it in some spaceship
3d_export
$5
turbine
...turbine
3dexport
turbine, with animation included, more texture of it
3d_ocean
$4
Wind Turbine
...n
and render setup turbine wind
wind turbine, modeled with cinema4d r13 , render setup and textured, custom logo for wind turbine
turbosquid
$1
Turbine
...turbosquid
royalty free 3d model turbine for download as ige on turbosquid: 3d models for games, architecture, videos. (1385242)
3d_export
$40
wind turbine
...wind turbine
3dexport
wind turbine
3d_export
$40
wind turbine
...wind turbine
3dexport
wind turbine
3d_export
$40
wind turbine
...wind turbine
3dexport
wind turbine
3d_export
$40
wind turbine
...wind turbine
3dexport
wind turbine
3d_export
$40
wind turbine
...wind turbine
3dexport
wind turbine
3d_export
$40
wind turbine
...wind turbine
3dexport
wind turbine
Working
3d_export
$5
WORKING PLATFORM
...working platform
3dexport
working platform 4000x3000x1500mm
design_connected
$16
Working set
...working set
designconnected
smallaccents working set computer generated 3d model.
3ddd
free
Pinao / Stelar Works
...pinao / stelar works
3ddd
stelar works , stellar works
стулья pinao от stelar works
design_connected
$13
Work Lamp
...work lamp
designconnected
design house stockholm work lamp computer generated 3d model. designed by form us with love.
turbosquid
$6
Road Works
...turbosquid
royalty free 3d model road works for download as on turbosquid: 3d models for games, architecture, videos. (1151328)
3ddd
free
Stellar Works Lumar
...llar works , lumar , барный
stellar works lumar
turbosquid
$20
Work boots
...bosquid
royalty free 3d model work boots for download as stl on turbosquid: 3d models for games, architecture, videos. (1313566)
turbosquid
$8
Desk Work
...osquid
royalty free 3d model desk work for download as blend on turbosquid: 3d models for games, architecture, videos. (1381338)
turbosquid
$5
Work Desk
...osquid
royalty free 3d model work desk for download as blend on turbosquid: 3d models for games, architecture, videos. (1435344)
turbosquid
$1
Plant for work
...uid
royalty free 3d model plant for work for download as obj on turbosquid: 3d models for games, architecture, videos. (1557514)