Thingiverse
Witty Pi 3 Raspberry Pi case by jackjansen
by Thingiverse
Last crawled date: 4 years, 6 months ago
A case for a Raspberry Pi with a Witty Pi http://www.uugear.com/product/witty-pi-3-realtime-clock-and-power-management-for-raspberry-pi/.
The power socket and button are accessible (I forgot to make a hole for the USB-C port as I don't need it).
I've also enlarged he top section of the screw holes, so reasonable M3 screws can be used.
The Raspberry Pi and Witty Pi can be secured to the bottom by replacing the 8 brass screws that come with the Witty Pi by 4 long M2.5 screws that will secure the Witty Pi to the spacers to the Raspberry pi to the case bottom.
Printing:
No special requirements. I used 0.2mm fast with no support and it worked fine on my Anet A8.
Built in Autodesk Fusion by importing the originals, converting from mesh to brep (after reducing the polygon count somewhat), and constructing the extra holes. I'm happy to share the Fusion file, contact me.
The power socket and button are accessible (I forgot to make a hole for the USB-C port as I don't need it).
I've also enlarged he top section of the screw holes, so reasonable M3 screws can be used.
The Raspberry Pi and Witty Pi can be secured to the bottom by replacing the 8 brass screws that come with the Witty Pi by 4 long M2.5 screws that will secure the Witty Pi to the spacers to the Raspberry pi to the case bottom.
Printing:
No special requirements. I used 0.2mm fast with no support and it worked fine on my Anet A8.
Built in Autodesk Fusion by importing the originals, converting from mesh to brep (after reducing the polygon count somewhat), and constructing the extra holes. I'm happy to share the Fusion file, contact me.