Thingiverse
wireless charging dimmable led lamp by theswink
by Thingiverse
Last crawled date: 4 years, 10 months ago
Hi,
This is a wireless charging dimmable led lamp. for inside or outside (see update:).
It run's for day's on a full charge if dimmed down a bit.
The Design is by my good friend Joost. https://www.joostvangennip.com/
A small video showing the dimming and wireless charging.https://youtu.be/APuv4s2Xb2U
The pictures are in build sequence. (I hope)
You need this:
First get a cheap power brick somewhere. In europe go to Action. you get 4 good quality li-ion batteries in a power brick.
Then:
Touch dimmable led lamp warm white.https://nl.aliexpress.com/item/33011289982.html
QI charger.https://www.dx.com/p/5v-1500ma-qi-standard-wireless-charging-transmitter-for-nokia-samsung-more-white-2030860.html
QI receiver.https://www.ebay.nl/itm/Qi-Wireless-Charger-Charging-Receiver-Kit-For-Samsung-Galaxy-S3-S4-S5-Note-2-3-4/142798081791?hash=item213f6dceff:g:BOsAAOSwuCFa~S0K
Choose samsung galaxy S3
Li-ion charge er module.https://www.ebay.nl/itm/2x-TP4056-1A-5V-Li-ion-Battery-Charger-Module-USB-Board-Electronic-Component-US/311904046261
Update:
I designed a rain proof outside version. Again, the pics speak for themselves.
You don't have to make the long thick wire holder stands for the led unit. just make the thick wires about 5cm (2") long. and solder the thin wires to them (quickly (heat load))
use the thinnest double sided sticky tape you can find. The touch sensor doesn't have that much range. the wall thickness over the sensor is 1mm. I've tested the range to be about 1.5mm.
Have fun!
Wilfred.
print the top part on it's flat side no support
print the middle part on it's flat side no support
print the bottom part on it's feet WITH support.
This is a wireless charging dimmable led lamp. for inside or outside (see update:).
It run's for day's on a full charge if dimmed down a bit.
The Design is by my good friend Joost. https://www.joostvangennip.com/
A small video showing the dimming and wireless charging.https://youtu.be/APuv4s2Xb2U
The pictures are in build sequence. (I hope)
You need this:
First get a cheap power brick somewhere. In europe go to Action. you get 4 good quality li-ion batteries in a power brick.
Then:
Touch dimmable led lamp warm white.https://nl.aliexpress.com/item/33011289982.html
QI charger.https://www.dx.com/p/5v-1500ma-qi-standard-wireless-charging-transmitter-for-nokia-samsung-more-white-2030860.html
QI receiver.https://www.ebay.nl/itm/Qi-Wireless-Charger-Charging-Receiver-Kit-For-Samsung-Galaxy-S3-S4-S5-Note-2-3-4/142798081791?hash=item213f6dceff:g:BOsAAOSwuCFa~S0K
Choose samsung galaxy S3
Li-ion charge er module.https://www.ebay.nl/itm/2x-TP4056-1A-5V-Li-ion-Battery-Charger-Module-USB-Board-Electronic-Component-US/311904046261
Update:
I designed a rain proof outside version. Again, the pics speak for themselves.
You don't have to make the long thick wire holder stands for the led unit. just make the thick wires about 5cm (2") long. and solder the thin wires to them (quickly (heat load))
use the thinnest double sided sticky tape you can find. The touch sensor doesn't have that much range. the wall thickness over the sensor is 1mm. I've tested the range to be about 1.5mm.
Have fun!
Wilfred.
print the top part on it's flat side no support
print the middle part on it's flat side no support
print the bottom part on it's feet WITH support.