Thingiverse
Window Ice Scraper
by Thingiverse
Last crawled date: 5 years, 10 months ago
This is a 3D printed icescraper for the car.
It tried to make a simple easy to print design.
I would advise to reduce the size by arround 20% depending on your hand size, if your left handed you can also invert the piece in your slicer to make it fit perfect into our hand.
After printing i used a iron and some baking paper to go carefully over the tip and create a nice sharp edge.
It tried to make a simple easy to print design.
I would advise to reduce the size by arround 20% depending on your hand size, if your left handed you can also invert the piece in your slicer to make it fit perfect into our hand.
After printing i used a iron and some baking paper to go carefully over the tip and create a nice sharp edge.