Winchester 94AE Picatinny Rail by Infinitus

Last crawled date: 3 years, 2 months ago

Quick picatinny rail mount for Winchester 94AE (chambered in 357 Magnum). Note this must be the AE version, or a version drilled and tapped in the same way, as the mount uses the screw holes above the chamber.
The mount is made up of 3 parts;
A sight plate that fits into the dovetail that the buckhorn sight originally fitted into.
A mount that fits onto the sight plate and wraps around the barrel.
A section of picatinny rail that fits on top of the mount.
I've included a 2 piece version as well, with the mount and the rail as one piece. This requires printing with supports, and a lot more cleanup. As such I would heavily suggest just using the 3 piece version which is super easy to print.
Installation Instructions:
Remove buckhorn sight by drifting it to the right with a rubber hammer and punch.
Install 2 M3 threaded inserts into the sight plate (I usehttps://www.ebay.co.uk/itm/262993790868).
Insert the sight plate into the dovetail that the buckhorn sight originally fitted into.
Place mount on top so that sight plate fits into the cutout.
Place rail on top of the mount and secure in place using; 2 M3 screws through the holes in the mount into the sight plate; 2 M3.5 screws through the holes in the mount into the screw holes above the chamber (I just reused the ones that came with the gun originally).