Thingiverse
WilderRig-PopSinker by WilderRig
by Thingiverse
Last crawled date: 4 years, 7 months ago
It got it name because it act as a POPPER and can dive with a steady retrieve and hold its depth rising slowly. Like the Mini-Bite with the treble hook dressed it moves though thin weeds very well.
I print with a 2 part file stopping at the point I want to drop the BB's in, but you can use the one file, pause the print, add your weight and continue that's up to you.
It has a through hole to either add your wire or line and hook if that's your preference. It has an air chamber in the top half and a belly chamber for up to 3 BB's. Depending on the amount of infill and BB's you use will determined how it sinks/floats.
I use different color PLA and a Sharpie maker to give it some life and as you can see in Pics it at-least fools the fish.
Good Luck and "GO GET SOME FISH!!!"
I print with a 2 part file stopping at the point I want to drop the BB's in, but you can use the one file, pause the print, add your weight and continue that's up to you.
It has a through hole to either add your wire or line and hook if that's your preference. It has an air chamber in the top half and a belly chamber for up to 3 BB's. Depending on the amount of infill and BB's you use will determined how it sinks/floats.
I use different color PLA and a Sharpie maker to give it some life and as you can see in Pics it at-least fools the fish.
Good Luck and "GO GET SOME FISH!!!"