Thingiverse
WiFi Duet Enclosure for D-Bot (or other V-channel) Printers by dotorg
by Thingiverse
Last crawled date: 3 years ago
This is an enclosure for mounting a Duet WiFi controller to a D-Bot or other printer that uses V-channel extrusions as the frame. Its designed to be mounted vertically, maintaining passive airflow over the rear of the board per Duet instructions for cooling. Additionally, a fan can be mounted to drive additional airflow over the board. The enclosure has a hinged lid designed to be able to be opened while the enclosure is up against the extrusions, and a great number of 17mm openings suitable for half inch split loom to protect wire bundles. The enclosure is designed to mount with the USB port and SD card, and other buttons, on the inside of the front rail on the D-Bot, to minimize things sticking outside the frame.
I spent a good bit of time trying to figure out the best arrangement of openings for wiring, and settled on "can't have too many", so there's a lot. I'm working on a plug design to close ones that aren't being used, but so far they've not been reliable when printed with PLA, which I'm trying to resolve before I upload. There's also a 10mm hole on the top edge which I'm using for the wiring to my PanelDue controller, using my PanelDue enclosure here: https://www.thingiverse.com/thing:2486323
The board mounts with short M4 screws to the enclosure. The lid uses 5mm shelf pins like these: https://www.lowes.com/pd/Hillman-8-Pack-5mm-Nickel-Plated-Peg-Shelving-Hardware/999995496
The enclosure can be mounted with two or four bolts to the V-channel. If you use four, you're going to need rounded topped 8mm M5 bolts to fit under it -- cap head, like the D-bot specifies for its other bolts, won't clear the hinge.
The hinge screws shut using a flat-top M4 screw, and a captive nut so it can be opened and closed without wear over time.
If there's demand for it, I can probably modify the end cuts for a Duet Ethernet, but I couldn't test it because I don't have one. I think the rest of the board spacings are identical, though.
Edit:
I've uploaded a second version (v56) of the Body of the enclosure. The more work I'd done with my D-Bot, the less I liked the sharp angle the extruder heater wiring had to take to reach the connectors. (Its annoying that they come off a different side than the power in and bed heater connections, where you're already going to need clearance in the enclosure. The updated one has a small rectangular opening on the bottom where the connections are, so if you prefer to run pin connectors out rather than having tinned-tip wires doing a sharp L to reach them, you can run the extruder heaters out the bottom of the enclosure.
I'm leaving the original (v55) for anyone who wants to keep the bottom "clean" and just squeeze the connections in.
I'd probably recommend v56 though, if you're printing it. Better to have the hole (which you can't see with it mounted) and not use it than decide you need it and not have it.
Update:
I've uploaded a fan grille/cover that matches this: https://www.thingiverse.com/thing:2834376
I spent a good bit of time trying to figure out the best arrangement of openings for wiring, and settled on "can't have too many", so there's a lot. I'm working on a plug design to close ones that aren't being used, but so far they've not been reliable when printed with PLA, which I'm trying to resolve before I upload. There's also a 10mm hole on the top edge which I'm using for the wiring to my PanelDue controller, using my PanelDue enclosure here: https://www.thingiverse.com/thing:2486323
The board mounts with short M4 screws to the enclosure. The lid uses 5mm shelf pins like these: https://www.lowes.com/pd/Hillman-8-Pack-5mm-Nickel-Plated-Peg-Shelving-Hardware/999995496
The enclosure can be mounted with two or four bolts to the V-channel. If you use four, you're going to need rounded topped 8mm M5 bolts to fit under it -- cap head, like the D-bot specifies for its other bolts, won't clear the hinge.
The hinge screws shut using a flat-top M4 screw, and a captive nut so it can be opened and closed without wear over time.
If there's demand for it, I can probably modify the end cuts for a Duet Ethernet, but I couldn't test it because I don't have one. I think the rest of the board spacings are identical, though.
Edit:
I've uploaded a second version (v56) of the Body of the enclosure. The more work I'd done with my D-Bot, the less I liked the sharp angle the extruder heater wiring had to take to reach the connectors. (Its annoying that they come off a different side than the power in and bed heater connections, where you're already going to need clearance in the enclosure. The updated one has a small rectangular opening on the bottom where the connections are, so if you prefer to run pin connectors out rather than having tinned-tip wires doing a sharp L to reach them, you can run the extruder heaters out the bottom of the enclosure.
I'm leaving the original (v55) for anyone who wants to keep the bottom "clean" and just squeeze the connections in.
I'd probably recommend v56 though, if you're printing it. Better to have the hole (which you can't see with it mounted) and not use it than decide you need it and not have it.
Update:
I've uploaded a fan grille/cover that matches this: https://www.thingiverse.com/thing:2834376
Similar models
thingiverse
free
D-Bot Duet Wifi Enclosure by MidTenMaker
... included more holes for the flexible conduit, a plug if you don't use them all and a small brace on the v-slot mounting tab.
thingiverse
free
Berd Air eSwitch Duet Wifi mount by Hergonoway
... the duet since they're made elsewhere on the duet.
you have to solder the male dupont connector on the eswitch board upward.
thingiverse
free
V-channel Mount for 7" PanelDue by dotorg
...usion. make sure you are downloading/printing the ones that match your extrusion type. (the non-specified ones are for 2020/2040)
grabcad
free
Duet Panel 7 " Paneldue enclosure
...his is the enclosure for paneldue 7", for assembly you need 8 x 3mm insert
include solidworks files, feel free to modify it
thingiverse
free
Duex / Duet enclosure
...to cool your precious duet. use this weird power connector that came with my tevo little monster to feed your duet with 24 volts.
thingiverse
free
7" PanelDue V1.1 Enclosure by Legrand
...d or a place for the connecting wire, so i added those as well.
once you snap this together it won't be easy to get it apart!
thingiverse
free
Duet Panel 5" - Paneldue 5 by jhpfilho
...ank you waletskw
paneldue v2 5 inch display enclosure by walterskw
published on august 22, 2017
www.thingiverse.com/thing:2494892
thingiverse
free
D-Bot Duet Wifi Enclosure Bottom Remix by anoldguy
... add standoffs.
i'm not super happy with the m5 holes and the v-slot mount yet. i don't think i got the parameters right.
thingiverse
free
PanelDue 7" and DuetWifi Enclosure Adaption for Rostock Max V2 by Thingismith
...stl file to compensate, but it's untested. let us know if it worked for you!
i got my light switch, toggle on/on, from frys.
thingiverse
free
Duet Maestro Enclosure with Wire Storage (Quad Fusion Ready)
...ts (used these so they don't come loose during a print.)
4 - m4-0.70 x 16mm
i purchased all hardware at the local home depot.
Dotorg
thingiverse
free
40mm Fan Grille / Cover by dotorg
...hin'! except it stylistically matches the lid of my wifi duet enclosure over here: https://www.thingiverse.com/thing:2495198
thingiverse
free
Hyperion Case for Google Nexus 5x by dotorg
...-color printing to get something even cooler.
the model is funkgerm's case with the embossed hyperion logo from borderlands.
thingiverse
free
LEGO-inspired Fidget disc by dotorg
...s, leaving the innermost empty. additionally, they were moved out 3mm, to ensure clearance on blocks all the way around the ring.
thingiverse
free
Google / Nest Hub Wall Mount by dotorg
...l.
its designed to print without any supports, so pretty much any print setting that works properly on your printer will be fine.
thingiverse
free
10oz Caulk Tube Cap by dotorg
...don't have good bed adhesion you may need rafts or something, but on my printer, with a pei surface, it printed without them.
thingiverse
free
Safety cap for uxcell SSR-25DA by dotorg
... positive if it'll snap on cleanly printed in pla, but in petg, this snaps on and holds tightly, but is easy to get back off.
thingiverse
free
Replacement handle for Hayward SPX1082CA by dotorg
...a. the frame is 2mm thick, so pretty much any settings you've got will result in a solid print, so infill doesn't matter.
thingiverse
free
Enclosure for ProtoBoard 1593K and NodeMCU by dotorg
...ounts to the box with the screws that come with it (4-40), the top and bottom screw together with two 4-40 bolts, 3/4" long.
thingiverse
free
Microsoft LifeChat LX-3000 clip for the Makerbot headphone stand by dotorg
... it.
this just clips onto it, and provides a central ridge or nub that the headphones can catch on to keep them from sliding off.
thingiverse
free
M4-thread Bed Mount for D-Bot Printer by dotorg
...hese aren't an exact drop-in replacement... you'll need to slightly adjust the arms of the bed for the alternate spacing.
Duet
turbosquid
$10
Duet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Orgadoor / Duet
...door , дверь
фабрика: orgadoor
коллекция: organic
модель: duet
сайт: www.orgadoor.com.ua
turbosquid
$47
Duet rally car
...uid
royalty free 3d model duet rally car for download as fbx on turbosquid: 3d models for games, architecture, videos. (1501869)
turbosquid
$39
Duet solid white
...d
royalty free 3d model duet solid white for download as fbx on turbosquid: 3d models for games, architecture, videos. (1236356)
turbosquid
free
Bench with a table Duet
...del bench with a table duet for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1655855)
turbosquid
$13
chandelier Lussole Loft Duet
...
royalty free 3d model lussole loft duet for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1180567)
turbosquid
$60
Duet classic car silver
...lty free 3d model duet classic car silver for download as fbx on turbosquid: 3d models for games, architecture, videos. (1489252)
turbosquid
$50
Duet classic car black
...alty free 3d model duet classic car black for download as fbx on turbosquid: 3d models for games, architecture, videos. (1490723)
turbosquid
$49
Duet car white and red
...alty free 3d model duet car white and red for download as fbx on turbosquid: 3d models for games, architecture, videos. (1486820)
turbosquid
$30
Bloom Upholstered Duet Lounge Chair
...model bloom upholstered duet lounge chair for download as max on turbosquid: 3d models for games, architecture, videos. (1503906)
Wifi
turbosquid
$1
Wifi Icon
...rbosquid
royalty free 3d model wifi icon for download as fbx on turbosquid: 3d models for games, architecture, videos. (1546436)
turbosquid
$10
WiFi Camera
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$4
Wifi Coffee Table
...offee table
designconnected
liv'it wifi coffee table coffee tables computer generated 3d model. designed by stefan schöning.
turbosquid
$2
Wifi Signal Booster
...yalty free 3d model wifi signal booster for download as blend on turbosquid: 3d models for games, architecture, videos. (1281888)
turbosquid
$15
IOT Wifi Switch
...odel iot wifi switch for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1510115)
3d_export
$12
IPod WiFi 3D Model
...ipod wifi 3d model
3dexport
ipod wi-fi
ipod wifi 3d model fau 71186 3dexport
turbosquid
$59
iPad Air WiFi
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Nintendo USB WIFI
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Wireless WiFi Router
...eless wifi router for download as blend, x, fbx, stl, and obj on turbosquid: 3d models for games, architecture, videos. (1682399)
turbosquid
$7
Wifi internet logo
...nternet logo for download as max, ige, obj, fbx, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1369275)
Bot
turbosquid
$19
Bot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Bot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
scanner bot
...scanner bot
3dexport
cool scanner bot who scans for fixing things...
3d_ocean
$9
Apc Bot
...n bot games toys
an all-purpose-constructo-bot. for cartoon purposes. the model is not rigged. please use vray adv for rendering.
3d_export
$75
Bot 3D Model
...bot 3d model
3dexport
robot bot man kiborg character
bot 3d model evgen 19504 3dexport
turbosquid
free
Eye Bot
...eye bot
turbosquid
free 3d model eye bot for download as fbx on turbosquid: 3d models for games, architecture, videos. (1514059)
turbosquid
$29
Gorill-bot
...bosquid
royalty free 3d model gorill-bot for download as fbx on turbosquid: 3d models for games, architecture, videos. (1239456)
turbosquid
$25
Lamp Bot
...bosquid
royalty free 3d model lamp bot for download as blend on turbosquid: 3d models for games, architecture, videos. (1230121)
turbosquid
$10
Spectre Bot
...osquid
royalty free 3d model spectre bot for download as fbx on turbosquid: 3d models for games, architecture, videos. (1616378)
turbosquid
$8
Ultra Bot
...urbosquid
royalty free 3d model ultra bot for download as ma on turbosquid: 3d models for games, architecture, videos. (1330752)
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Channel
turbosquid
$8
Channel Daybed
...ree 3d model channel daybed for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1637702)
turbosquid
$6
Channel Ring
... free 3d model channel ring for download as 3dm, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1593829)
turbosquid
$30
Channel Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Channelizer drum
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
C4 Channel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
C3 Channel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
C8 Channel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
C7 Channel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
C6 Channel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
C18 Channel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Printers
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
V
design_connected
$16
V Chair
...v chair
designconnected
v chair computer generated 3d model.
design_connected
$11
V Hanglamp
...v hanglamp
designconnected
arturo alvarez v hanglamp computer generated 3d model. designed by alvarez, arturo .
turbosquid
$25
Borbet V
...v
turbosquid
royalty free 3d model borbet v for download as on turbosquid: 3d models for games, architecture, videos. (1381618)
turbosquid
free
Saturn V
...rn v
turbosquid
free 3d model saturn v for download as blend on turbosquid: 3d models for games, architecture, videos. (1651098)
turbosquid
$40
V motor
...turbosquid
royalty free 3d model v motor for download as max on turbosquid: 3d models for games, architecture, videos. (1379483)
turbosquid
$7
V for Van
...rbosquid
royalty free 3d model v for van for download as max on turbosquid: 3d models for games, architecture, videos. (1695889)
turbosquid
$5
Letter v
...urbosquid
royalty free 3d model letter v for download as max on turbosquid: 3d models for games, architecture, videos. (1408535)
turbosquid
$5
Letter v
...urbosquid
royalty free 3d model letter v for download as max on turbosquid: 3d models for games, architecture, videos. (1408534)
turbosquid
$15
BonePile V
...oyalty free 3d model bonepile v for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1546310)
turbosquid
$2
FONT V
...quid
royalty free 3d model font v for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1549450)
Other
design_connected
$16
ST12 Other
...signconnected
photo-realistic 3d models of the st12 other stool from e15 for 3d architectural and interior design presentations.
turbosquid
$26
Oar and Other
...quid
royalty free 3d model oar and other for download as fbx on turbosquid: 3d models for games, architecture, videos. (1473409)
turbosquid
$5
chair with other
...id
royalty free 3d model chair with other for download as ma on turbosquid: 3d models for games, architecture, videos. (1171468)
3ddd
$1
parfume and other
...parfume and other
3ddd
тумбочка
create by sametyuzer
turbosquid
$79
The Others Collection
...others collection for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1480228)
turbosquid
$25
Other Man
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
other car.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Other Mothers Hand
... 3d model other mothers hand for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1663825)
turbosquid
$8
other sport wheel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
pool and other elements
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.