Thingiverse
WiFi Cap For QiDi Tech 1 by davebpix
by Thingiverse
Last crawled date: 4 years, 7 months ago
I started with LarzJ 's FlashAir WiFi Dust Cap and made it a little taller. It now fits on my QiDi Tech 1 3D printer as a dust cap for the Toshiba Flash Air SD card.
When I printed and tried the original version it popped out the SD card. Apparently an SD card in the QiDi's SD card slot projects upward slightly more than when in the FFCP.
I used the two color version (c'mon, it is for a QiDi Dual Extruder printer...) and stretched the Z axis on both parts a bit in S3D. I also moved the base of the Logo up a bit to produce a flush top surface. Then exported the STL's.
When I printed and tried the original version it popped out the SD card. Apparently an SD card in the QiDi's SD card slot projects upward slightly more than when in the FFCP.
I used the two color version (c'mon, it is for a QiDi Dual Extruder printer...) and stretched the Z axis on both parts a bit in S3D. I also moved the base of the Logo up a bit to produce a flush top surface. Then exported the STL's.