Thingiverse
Whoopcraft V4 by scheretb
by Thingiverse
Last crawled date: 3 years, 1 month ago
Added hex file for NAZE board that comes with the inductrix pro. The spektrum receiver on that board appears to only support 6 channels so throttle control for bottom 2 motors was put on AUX2 in betaflight which would be AUX1 on your spektrum radio.
Update: Redesigned for easier assembly and lighter weight. Weight is reduced by about 30% on new design coming in at 22-23 grams. Also changed the battery holder to accommodate the Inductrix FPV+ 500mah batts.
Inspired by Badassdrones design, I wanted to make something a little easier for me to make on my cheap 3d printer. Parts were designed to be printed flat on print bed with no supports and then glued together. For best performance I would say skip the skirt but it's neat for more of hovercraft feel and look. I'd like to work on getting the weight down. See a few designs popping up, what kind of weight are you guys getting. The batteries in my scale were dead but I can post back once I go to the store.
Special thanks to rafl for the Betaflight firmware. thing #2752007
Update: Redesigned for easier assembly and lighter weight. Weight is reduced by about 30% on new design coming in at 22-23 grams. Also changed the battery holder to accommodate the Inductrix FPV+ 500mah batts.
Inspired by Badassdrones design, I wanted to make something a little easier for me to make on my cheap 3d printer. Parts were designed to be printed flat on print bed with no supports and then glued together. For best performance I would say skip the skirt but it's neat for more of hovercraft feel and look. I'd like to work on getting the weight down. See a few designs popping up, what kind of weight are you guys getting. The batteries in my scale were dead but I can post back once I go to the store.
Special thanks to rafl for the Betaflight firmware. thing #2752007
Similar models
thingiverse
free
monitor holder spektrum inductrix by ejpsx
...monitor holder spektrum inductrix by ejpsx
thingiverse
monitor holder spektrum inductrix
thingiverse
free
Compact 1S 3.7V LiPo Battery Box (for batteries for tiny whoop, inductrix, inductrix fpv +, etc drones) by robertgentel
... to rotate the insert and lay it flat but that is about it.
if you have any requests you can contact me at https://www.madlab.com
thingiverse
free
Monitor holder Spektrum inductrix by smithpak
...1815752 the second one is monitor holder spektrum inductrix https://www.thingiverse.com/thing:2119620 with a block printed in abs
thingiverse
free
Inductrix FPV Case by _SYCO_
...ox to hold the inductrix with an fpv camera on, it's also got space for 10 batteries. enjoy but beware it's a long print.
thingiverse
free
Inductrix / TinyWhoop - Easy to print, plug-and-play frame replacement by PeterProvost
... abs with these settings are coming in around 4.5g, which is a bit more than the stock inductrix but less than the eachine frame.
thingiverse
free
Spektrum DX7 Battery cover by DaFiDra
... and i still had a few lipos left, but which are slightly larger, i have designed a larger battery cover for my old spektrum dx7.
thingiverse
free
R2D2 Battery Box
...ould center the weight better. it's sized for my power sonic model ps-1270 f1 12v 7amp battery (https://tinyurl.com/stedtaj).
thingiverse
free
Dachshund--Remixed with Supports by ErinMakesStuff
...ily. i used a modifi3d heated knife to remove them, but i think an exact-o knife or wire snippers would work pretty well as well.
thingiverse
free
Inductrix FPV Battery Cap - Flex by guitartoys
...charged. but i just have one.
if it's charged, it's got a cap on it. if the battery needs a charge, there's no cap.
thingiverse
free
Inductrix modified frame by babar121
...callops" has straight ducts, as well the fc board mounting holes have been adjusted so you dont need battery tray component.
V4
design_connected
$16
V4 vases
...v4 vases
designconnected
sy design v4 vases computer generated 3d model. designed by song, seung-yong.
turbosquid
$20
Door v4
...yalty free 3d model door v4 for download as max, max, and obj on turbosquid: 3d models for games, architecture, videos. (1523140)
turbosquid
$5
Hand v4
...yalty free 3d model hand v4 for download as ztl, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1567431)
turbosquid
$9
silencer v4
...3d model silencer v4 for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1711410)
turbosquid
$90
V4 Engine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
Payphone v4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$28
HAZRO V4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Carousel v4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
PokBall V4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
фонтан V4
...фонтан v4
3ddd
фонтан
фонтан, fantan, fontan