Whoop Daddy by iDrone

Last crawled date: 2 years, 12 months ago

8.5mm motor version similar to the Tiny Whoop. I needed a bigger version of the TW for safely flying in the house, and this is what I designed. This build uses:
Scisky flight controller
CL 820-17 Dark Edition motors
Q25 16ch. VTX and camera
Ladybird 55mm props
Turnigy Graphene 65c 750mah battery
All up weight (without battery) is 51.4gr.
The motor caps protect the wires on the bottom of the motors and keep the motors from pushing up if you land hard. The caps are the right length to have the top of the motors flush with the top of the motor mounts in the frames.
With the 750Mah batteries I get 5.5 minutes of flying and 4.5 minutes of hard flying with no power dropoff. I land at 4.5 minutes and have 3.7v on the battery. You'll notice no components stick out above or below the frames, so the electronics are well protected.
This is a very easy print needing no rafts or supports. Enjoy and let me know how it works for you.