Thingiverse
Wheel of Fortune
by Thingiverse
Last crawled date: 4 years, 3 months ago
short demo:https://www.youtube.com/watch?v=zvzt076rY1M
This wheel of Fortune will allow you to randomly select 1 from 42 single output.
In my case I wrote 42 activities to do during the week (things like sport, movies, hiking, pic-nick, good restaurant, cleaning the house...).
You can make any game out of it, involving drinks or anything...
I printed little papers from 3,9 x 6,3 cm and rolled them along the longest direction (so I end up with a cylinder of 3,9 height).
You can choose between: 42, 21, 14, 7 or 6 outputs (for outputs similar probability).
If you want a wheel with the outputs written on it, you will need to print it yourself, you will need a disk of paper with inner diameter of 40 mm and outter of 180.
Also for spinning the wheel you will need a bearing of 30 mm outter diameter, 10 inner diameter and 9 mm thickness (thickness can be slightly different).
I recommend a quite thick walls (>3 mm), so that the schaft inside the bearing doesn't break.
Print with almost no support with the base lying down (only a bit of support for the "spring pointer").
This wheel of Fortune will allow you to randomly select 1 from 42 single output.
In my case I wrote 42 activities to do during the week (things like sport, movies, hiking, pic-nick, good restaurant, cleaning the house...).
You can make any game out of it, involving drinks or anything...
I printed little papers from 3,9 x 6,3 cm and rolled them along the longest direction (so I end up with a cylinder of 3,9 height).
You can choose between: 42, 21, 14, 7 or 6 outputs (for outputs similar probability).
If you want a wheel with the outputs written on it, you will need to print it yourself, you will need a disk of paper with inner diameter of 40 mm and outter of 180.
Also for spinning the wheel you will need a bearing of 30 mm outter diameter, 10 inner diameter and 9 mm thickness (thickness can be slightly different).
I recommend a quite thick walls (>3 mm), so that the schaft inside the bearing doesn't break.
Print with almost no support with the base lying down (only a bit of support for the "spring pointer").
Similar models
thingiverse
free
Pully for roller skate bearings (supportless) by rrrlasse
...7.7 mm so that the screw will thread it).
no need for support if printed as oriented in the stl files.
fusion360 source included.
thingiverse
free
Tool for precise drilling 8 mm hole by thedennis6
...h 0.4 mm height to save time, but you can print it finer. you can see the video here: https://www.youtube.com/watch?v=rzjch_od4m0
thingiverse
free
Bearing V wheel by Iks_Ypsilon
...s inner diameter 28mm and second has 28.1mm, because some people can´t fit the 28mm version. outter diameters are 33mm and 33.1mm
thingiverse
free
Wheel of Fortune
... i also used a piece of hard plastic to make the 'ticker' on the top, but you could also use laminated paper or the like.
thingiverse
free
100mm to 75mm pipe adapter by tomkooij
...5% infill. printed in pla.
for a "longer lasting" solution it should be printed with 100% infill and probably in abs.
thingiverse
free
Solder spool holder with 624 ball bearings by 3driven
...g hole diameter: 13,14 mm
bearing thickness: 7 mm
can be used with ball bearings 624 (inner 4 mm, outer 13 mm, thickness 5 mm)
thingiverse
free
Filament Spool Holder - Bearing - No Friction Spinning
... is a 4x16mm. inner and outer spool parts may have to be adjusted to print by your machine to properly fit the bearing id and od.
thingiverse
free
Filament spool holder (ball bearings required) by romaindurand
...generated supports (using craftware)
raft
0.100 mm z-axis resolution
spool_holder_foot.stl
no supports
0.200 mm z-axis resolution
thingiverse
free
Filament Spool Holder / Stand / Roller by robbycandra
... holder.
you need
4 bearing with outer diameter 17 mm and inner diameter 6 mm
4 m6 screew 30 mm
4 printed wheel
4 printed food
thingiverse
free
Spinner / Ornament SnowFlake by SMskateProd
...arameters in cura.
the spinner has been made for standard bearrings (22 mm outter diameter, 8 mm inner diameter and 7 mm height).
Fortune
turbosquid
$20
fortune
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Limitless / RACHEL+FORTUNE
...limitless / rachel+fortune
3ddd
limitless
limitless_rachel+fortune
turbosquid
$39
Fortune Cookie
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Fortune Cookie
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Fortunately Bench
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Fortune cookie
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
wheel of fortune
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
fortune temple
...fortune temple
3dexport
simple rendering of the scene file
3d_export
$5
bumper arb toyota fortuner
...bumper arb toyota fortuner
3dexport
bumper arb toyota fortuner
3d_ocean
$89
Toyota Fortuner 2012
....com/watch?v=wrg8vpb7wg4 the 3d model was created on real car base. model is created accurately, in real units of measurement,...
Wheel
archibase_planet
free
Wheel
...l steering control steering wheel
wheel ship steering wheel n060215 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_ocean
$14
Wheel
...wheel
3docean
car rim car wheel rim wheel
high poly car wheel design. 16,840 polys
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
Wheel
...wheel
3dexport
wheel
3d_export
$5
wheel
...wheel
3dexport
wheel for car.
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel