Thingiverse
Western Digital Case for 2TB drive by johnantoni
by Thingiverse
Last crawled date: 3 years, 5 months ago
Case for a Western Digital My Passport 2TB hard drive
Really went to town with this one.
Insets and raised parts so the two pieces align perfectly every time.
Bottom feet have insets so when you place bumpers on the bottom they will cover the screw holes and be nice and inset.
Ventilation holes on either side.
I added screw holes on the sides to fit the drive as I broke a brass standoff in the actual drive so this way I can mount it on the sides.
Need:
4x M3 screws 6mm to screw the top to the bottom.
4x adhesive bumpers to stick on the bottom.
4x 4/40 screws to mount the drive into the case from the sides.
Printing:
No RAFT.
With Supports.
Really went to town with this one.
Insets and raised parts so the two pieces align perfectly every time.
Bottom feet have insets so when you place bumpers on the bottom they will cover the screw holes and be nice and inset.
Ventilation holes on either side.
I added screw holes on the sides to fit the drive as I broke a brass standoff in the actual drive so this way I can mount it on the sides.
Need:
4x M3 screws 6mm to screw the top to the bottom.
4x adhesive bumpers to stick on the bottom.
4x 4/40 screws to mount the drive into the case from the sides.
Printing:
No RAFT.
With Supports.
Similar models
thingiverse
free
My Passport Ultra (500gb & 2tb)
...ter-sunk holes to the design and mount with screws too.
the open end at the back allows for easy insertion and removal of drives.
thingiverse
free
Dual 3.5" HDD Mount for Casetronic Travla C137 Mini-ITX by poberauer
...e drives drives
manual finishing:
drill (or melt) screw holes through the bottom piece, to mount to the bottom of the lower drive
thingiverse
free
LCD CASE(Full_Graphic_Smart_LCD_Controller) by TRENDi77
.../for mount
2x m3 xx mm bolts /for mount
uploaded work drafts for autocad 2010 or higher version, so you can remake if you want.
thingiverse
free
Naze 32 case by questpact
...taping.
the concept is to use double sided tape to secure the mount to your frame eliminating vibration to the flight controller.
thingiverse
free
Gotek frame for external floppy drive case by shred
...splay, so i extended the front sides of the bottom frame a bit for optical reasons.
the changed openscad source code is included.
thingiverse
free
LCR-T4 ESR Meter Case with M3 mounting holes
...threads when you screw them in.
that is all i changed
i included the bottom stl for convenience only, i did not change it at all.
thingiverse
free
Pi drive box for WD Labs PiDrive by charles_linquist
...n digital labs) for a raspberry pi . the mounting holes are compatible with many of the vesa-style cases for the rpi 2b and 3b.
thingiverse
free
Hard Drive Hanger - Western Digital My Passport 2tb bracket by E_Roth_3
...wo parts slide on to the ends of the harddrive. i added some fuzzy velcro to the parts that touch the laptop so it wont scratch.
thingiverse
free
Ryobi Battery Mount Enclosed remix by Greecher
... was the case, i enclosed the open end of the bottom, and extended bottom plate to fill out the screw hole so that i can do that.
thingiverse
free
5.25 to 3.5 2.5 HDD SSD adapter by DC010
...u might be able to stack 2 of these in 1 slot, but i found at least 1 case that it didn't, so you can check that on your own.
Johnantoni
thingiverse
free
Mason insert for planters by johnantoni
...for a wick to fit thru so it can be used as a self-watering planter.
original thingiversehttps://www.thingiverse.com/thing:557775
thingiverse
free
iPhone 6/6S Plus Wall Charger by johnantoni
...hone.
print with supports, no raft needed
follow more of my creations on instagram at => https://www.instagram.com/johnantoni/
thingiverse
free
DAS Keyboard Stand by johnantoni
... your not using it.
print 2x and screw them into your desk to keep them in place.
no supports, printing 2 takes about 40 minutes.
thingiverse
free
OctoPi Remix - higher roof for headers by johnantoni
... top when you have attached the redbear to the pi zero via header's.
original thing https://www.thingiverse.com/thing:2137152
thingiverse
free
Golden Snitch (Easy Print) Extracted Files by johnantoni
...of https://www.thingiverse.com/thing:858184
print the wings on a raft as they're high detail
globe needs supports but no raft
thingiverse
free
RSA Key Fob holder by johnantoni
...ers to get rid of some hard edges.
printed in pla without supports and without a raft.
20% infill.
prints in about 1hr 10 minutes
thingiverse
free
Dishwasher Cutlery Tray Inserts by johnantoni
... cycle, printed thick to be more resistant and less brittle.
use a raft as the objects themselves are quite intricate.
25% infill
thingiverse
free
Nail Finisher Stand (REMIX) by johnantoni
....
you'll need supports turned on the for base, but should not need any for the deck, which fits into the base once assembled.
thingiverse
free
Hanging Plant Balcony Hook by johnantoni
...gns (included) to give more support for the basket.
print settings:
material: abs
infill: 30%
supports: yes (because of the hook)
thingiverse
free
DigiSpark Mountable Case (2 versions) by johnantoni
...s for when you have headers on the board and want to protect them.
print in pla, no supports needed.
prints in about 7-9 minutes.
2Tb
thingiverse
free
WD Elements 2TB Open Case by Leamnji
...wd elements 2tb open case by leamnji
thingiverse
simple case for mounting a 2tb elements hdd on the back of a tv.
thingiverse
free
WD Passport Ultra (2TB) by MarkC0x
...nks to the original designer.
i remixed this to expand it so that it would fit my wd passport ultra (2tb) external drive version.
thingiverse
free
Seagate Playstation 2tb HDD Vertical Stand by NMarrison1593
...seagate playstation 2tb hdd vertical stand by nmarrison1593
thingiverse
just a vertical stand for the seagate plastation 2tb hdd
thingiverse
free
My Passport Ultra (500gb & 2tb)
...ter-sunk holes to the design and mount with screws too.
the open end at the back allows for easy insertion and removal of drives.
thingiverse
free
Protection case for WD external harddisk My Passport Ultra 2TB by Nengnoinoi
...a external harddisk 2tb
no support
no raft
any material
60% infill
for lid please go to: http://www.thingiverse.com/thing:2011503
thingiverse
free
Lid for Protection case for WD external harddisk My Passport Ultra 1 and 2TB by Nengnoinoi
...sport ultra 1tb and 2tb
snap on!!!
refer to http://www.thingiverse.com/thing:2009215
and http://www.thingiverse.com/thing:2008768
thingiverse
free
My Passport Ultra 2TB by snowboarder
...ion of the micro usb 3.0 my not be perfectly aligned... please double check if your print requires it to be perfectly positioned.
thingiverse
free
Apple Time Capsule 2TB 4th Gen (A1409) v4 holder V LIGHTWEIGHT by hitmusic100
...9) v4 holder v lightweight by hitmusic100
thingiverse
for people who don't like wasting plastic - step and stls are the same
thingiverse
free
Apple Time Capsule 2TB 4th Gen (A1409) v4 BRACKET V LIGHTWEIGHT by hitmusic100
...409) v4 bracket v lightweight by hitmusic100
thingiverse
v light weight wall mount for people who don't like wasting plastic
Western
thingiverse
free
Western Digital
...western digital
thingiverse
western digital logo
thingiverse
free
Western Coffin by colinsmodels
...western coffin by colinsmodels
thingiverse
this is a mini western coffin which works the best with pla
thingiverse
free
Western Star Keychain by TheMan33
...western star keychain by theman33
thingiverse
this is a western star keychain i made off the western star logo!!
thingiverse
free
Western dragon by jennworks
...western dragon by jennworks
thingiverse
my own design, a western style dragon with wings mostly unfurled.
thingiverse
free
Western Fence Lizard by cicerone
...western fence lizard by cicerone
thingiverse
the western fence lizard, aka sceloporus occidentalis
thingiverse
free
Western Maryland Railway Logos by randymower
...western maryland railway logos by randymower
thingiverse
western maryland railway round logos
thingiverse
free
Token Box for Western Empires
... for western empires
thingiverse
token boxes for western empires (mega civilization).
2020-01-09
added: lids for eastern empires
thingiverse
free
Western Shelters by TwistedBoards
...nt systems, you'll get a laugh. interchangeable. three tents here, the 19x35, the "octagon," and the vestibule kit.
thingiverse
free
Gallows - medieval or western
...gallows - medieval or western
thingiverse
modeled in blender and uploaded for your gaming needs.
thingiverse
free
Western Sheriff Office by bgr58
...l pla
also you can download western saloon design http://www.thingiverse.com/thing:402683http://www.priyoid.com / print your idea
Digital
thingiverse
free
Western Digital
...western digital
thingiverse
western digital logo
thingiverse
free
Digitized Digitized Stanford Bunny by Nimrod
... 3d scanner
starting with a scan of a ceramic stanford bunny, i've been digitizing and replicating a series of new bunnies.
thingiverse
free
digital simulated cheese (for digital mice:-) by Syzguru11
...digital simulated cheese (for digital mice:-) by syzguru11
thingiverse
digital cheese
thingiverse
free
Digital Clock
...al clock
thingiverse
digital clock based on esp8266 and led matrix (max7219)
project here : https://github.com/dgambie/horlogev2
thingiverse
free
3 Digit Digital Display Bezel and Case by mhogan
.... segments can be printed separately and inserted into bezel for different color digits. 123d file included for edit convenience.
thingiverse
free
digital ball by Syzguru11
...digital ball by syzguru11
thingiverse
digital ball
thingiverse
free
Leg Makerbot Digitizer
...leg makerbot digitizer
thingiverse
leg makerbot digitizer
thingiverse
free
Dip into Digital Logo
...dip into digital logo
thingiverse
dip into digital 3d logo!
thingiverse
free
Digitalized Yoshi by raulmerlin
...digitalized yoshi by raulmerlin
thingiverse
this is a digitalized yoshi model with a stand.
thingiverse
free
DIGIT by LightningToast
...digit by lightningtoast
thingiverse
print out each piece and assembly with glue.
Drive
thingiverse
free
USB Drive / Flash Drive / Pen Drive Case by BrosJr
...usb drive / flash drive / pen drive case by brosjr
thingiverse
spare part for a broken usb drive case.
my mom´s request :-)
thingiverse
free
Turret Drive
...turret drive
thingiverse
drive key and housing
thingiverse
free
USB Flash Drive Holder of Drives by paxamime
...ot of flash drives for various purposes so while 20 drives may sound like a lot, this is only one of 3 that i am currently using.
thingiverse
free
Ender3 Direct drive duel drive mount
...have created for the ender3 and should fit the cr10 printers. this is for the duel drive mount version not the standard version.
thingiverse
free
Drive Shaft by RedMerlin
...drive shaft by redmerlin
thingiverse
a drive shaft.
thingiverse
free
Driving Message by Mariblueruby
...driving message by mariblueruby
thingiverse
cheeky driving message
thingiverse
free
G-Drive External Hard Drive Case by EvanVS
...ve case by evanvs
thingiverse
this is a case for an external usb harddrive.
this case is designed to fit the "g-drive"
thingiverse
free
MK2 Drive Bashguards
...mk2 drive bashguards
thingiverse
bashguards for the mk2 avio at gear drive!
thingiverse
free
Harmonic drive
...harmonic drive
thingiverse
harmonic drive i made, uses 7.9 mm steal ball bearings. make sure to split into parts before printing
thingiverse
free
Waterjet Drive
...waterjet drive
thingiverse
waterjet model
Case
thingiverse
free
Case
...case
thingiverse
case
thingiverse
free
Case
...case
thingiverse
case
thingiverse
free
case
...case
thingiverse
case for https://www.thingiverse.com/thing:4008790
case printed in surface mode
thingiverse
free
Case
...case
thingiverse
detector case first try
thingiverse
free
Case
...case
thingiverse
this is case for electrical components.
i used it for my led transformer.
thingiverse
free
Case
...case
thingiverse
this is a self created model of a case. it is desigend to be printed in a size of 15%.
thingiverse
free
case by milesman20051
...case by milesman20051
thingiverse
case
thingiverse
free
case by zyzomys
...case by zyzomys
thingiverse
case
thingiverse
free
CAse by Ryutaka18
...case by ryutaka18
thingiverse
case
thingiverse
free
case by johnboyjr
...case by johnboyjr
thingiverse
case