Wen Track Saw to Vacuum Hose Adapter by Solocrowd

Last crawled date: 3 years, 5 months ago

This is for the Wen CT1065 track saw to adapt the dust port to a standard carpet vacuum hose nozzle. I have a Hoover Wind-Tunnel vacuum that I bought at a thrift shop for $5 to use in my shop. Not bad for a two-stage vacuum with dual filters.
I created two versions of this, a "simple" and a "complex". The simple is just a slightly tapered tube which slides inside the saw port and outside of the hose port. It fills the gap well and is quick to print. One drawback is that it's difficult to remove from the saw port.
The "complex" model goes on both the inside and outside of the saw port. This makes the adapter easier to remove from the saw, as well as more robust.
I included both versions as stl files, as well as the Blender file I used to create these.
Link to the saw:https://wenproducts.com/products/ct1065-10-amp-6-and-a-half-inch-plunge-cut-sidewinder-circular-track-saw