Thingiverse
Wemos D1 OLED ComboSBS (Side by Side) case by Spiritdude
by Thingiverse
Last crawled date: 4 years, 5 months ago
Wemos D1 OLED ComboSBS (Side-By-Side), OLED combined with Wemos D1 Mini.
Hot-glue Wemos D1 aside of the OLED 128x64 SSD1306. Wire it as you like (SCK and SDA), GND to GND, and VCC to 3.3V Wemos.
If you like to have a Reset button, print the small item.
Note: you printer must be well calibrated X/Y and extrusion flow, if the cover won't fit nicely file the cover guides and/or the inside of the bottom case.
Nozzle: 0.4mm
Layer height: 0.2mm (or less)
Electrical wiring described at https://spiritdude.wordpress.com/2018/02/16/wemos-d1-mini-with-i2c-ssd1306-oled-128x64/
Hot-glue Wemos D1 aside of the OLED 128x64 SSD1306. Wire it as you like (SCK and SDA), GND to GND, and VCC to 3.3V Wemos.
If you like to have a Reset button, print the small item.
Note: you printer must be well calibrated X/Y and extrusion flow, if the cover won't fit nicely file the cover guides and/or the inside of the bottom case.
Nozzle: 0.4mm
Layer height: 0.2mm (or less)
Electrical wiring described at https://spiritdude.wordpress.com/2018/02/16/wemos-d1-mini-with-i2c-ssd1306-oled-128x64/