Thingiverse
Weller WLC100 Soldering Tip Caddy by jsmith24
by Thingiverse
Last crawled date: 4 years, 4 months ago
NB: There are two STLs included in this thing; the first is a "trial print" so that you can test the hole tolerance for you tips. I printed with Horizontal Expansion on Holes at 0.1, but you may not need to. The second STL is the actual, full-sized caddy.
I needed a tip holder for my Weller WLC100 soldering station, and there were two here on Thingiverse, but one wasn't what I wanted, the other only held four tips and I needed six.
I printed in PLA, which works well. I have designed this so that if you print with the hooks up (basically, place the "top" on the build plate when you slice), you won't need any supports.
My design is similar to this four tip holder, with a few obvious changes.https://www.thingiverse.com/thing:4306995
I needed a tip holder for my Weller WLC100 soldering station, and there were two here on Thingiverse, but one wasn't what I wanted, the other only held four tips and I needed six.
I printed in PLA, which works well. I have designed this so that if you print with the hooks up (basically, place the "top" on the build plate when you slice), you won't need any supports.
My design is similar to this four tip holder, with a few obvious changes.https://www.thingiverse.com/thing:4306995