WCW Monday Nitro TNT Entrance Stage 3d model
3dmdb logo
Thingiverse
WCW Monday Nitro TNT Entrance Stage

WCW Monday Nitro TNT Entrance Stage

by Thingiverse
Last crawled date: 4 years ago
This is a blast from the past. I am still adding little details here and there but for the most part it is complete. Relive WCW Nitro moments with a full entrance stage with props. The stage is cut into 6 sections so I could print out in pieces. The connectors are just simple triangles that have a tight fit. The connectors can be glued once snapped in. There are 2 parts of the front of the stage that are different and have less connectors since nothing joins in the front. The middle front stage piece connects to the ramp. There is also a connector for the rear ramp.
The light trusses should snap in snugly. I didn't have to use any glue for those to hold up nicely.The stage/truss lights are customizable to your specs. The top/front of the light truss has same size connector holes so you could snap in any kind of lighting just use the base I have provided no glue needed on those. For the Nitro logo in the center of the stage i did make a peg separate so it would be easier to print. I glued the peg to the back of the Nitro sign. The WCW big box logos are made to look like the real ones where they look like they are floating. These are connected with the connectors provided and should fit just snug with no glue needed. I did my best to scale all this to the 6 inch WWE Mattel action figures. The beer kegs should fit into the characters hands via the handle.
Credit goes to https://www.thingiverse.com/Ronnskull for the stage lights models and beer kegs. I just made minor modifications. Another credit goes to https://www.thingiverse.com/sablebadger/about for the light trusses. I remixed those from his Gaslands design. **Update*** I added 3 files for a truss Nitro sign. This would be the sign that is close to the announcer booth. The connector will snap into truss and the Nitro sign you will need to glue to connector.

Tags