Thingiverse
Waystone from Warhammer Vermintide II by Rumple
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is the Waystone from Warhammer Vermintide II. I modeled this in Blender from a screenshot. Print took 7 hours, 45 minutes. At 100% scale it's 20cm dia x about 7cm tall.
I uploaded just the obelisk & base separately so the obelisk can be printed at higher resolution. Print the obelisk with 0% infill. There is a hole for a LED to make it light up. The base has a recess for a 2032 coin cell battery. Put the positive LED lead on the side with the groove. Bend the negative lead into a circle & the battery will snap into the hole.
I uploaded just the obelisk & base separately so the obelisk can be printed at higher resolution. Print the obelisk with 0% infill. There is a hole for a LED to make it light up. The base has a recess for a 2032 coin cell battery. Put the positive LED lead on the side with the groove. Bend the negative lead into a circle & the battery will snap into the hole.